rekahsoft/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c0095710a7
qmk-firmware/keyboards/ergodox_ez/config.h

143 lines
4.2 KiB
C
Raw Normal View History

added ergodox
2015-10-26 20:32:37 +00:00
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
Fix config.h include guards
2016-07-10 09:01:28 +00:00
#ifndef ERGODOX_EZ_CONFIG_H
#define ERGODOX_EZ_CONFIG_H
added ergodox
2015-10-26 20:32:37 +00:00
fix infinity
2016-11-22 01:17:32 +00:00
#include "config_common.h"
added ergodox
2015-10-26 20:32:37 +00:00
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x1307
#define DEVICE_VER 0x0001
#define MANUFACTURER ErgoDox EZ
#define PRODUCT ErgoDox EZ
Improves debounce
2016-07-04 16:01:10 +00:00
#define DESCRIPTION QMK keyboard firmware for Ergodox EZ
added ergodox
2015-10-26 20:32:37 +00:00
/* key matrix size */
#define MATRIX_ROWS 14
improve ergodox ez performance With these changes, the ergodox ez goes from 315 scans per second when no keys are pressed (~3.17ms/scan) to 447 (~2.24ms/scan). The changes to the pin read are just condensing the logic, and replacing a lot of conditional operations with a single bitwise inversion. The change to row scanning is more significant, and merits explanation. In general, you can only scan one row of a keyboard at a time, because if you scan two rows, you no longer know which row is pulling a given column down. But in the Ergodox design, this isn't the case; the left hand is controlled by an I2C-based GPIO expander, and the columns and rows are *completely separate* electrically from the columns and rows on the right-hand side. So simply reading rows in parallel offers two significant improvements. One is that we no longer need the 30us delay after each right-hand row, because we're spending more than 30us communicating with the left hand over i2c. Another is that we're no longer wastefully sending i2c messages to the left hand to unselect rows when no rows had actually been selected in the first place. These delays were, between them, coming out to nearly 30% of the time spent in each scan. Signed-off-by: seebs <seebs@seebs.net>
2017-11-18 22:11:26 +00:00
#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
added ergodox
2015-10-26 20:32:37 +00:00
#define MATRIX_COLS 6
Creates a layouts/ folder for keymaps shared between keyboards (#1609) * include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches
2017-08-24 02:29:07 +00:00
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 60
#define MOUSEKEY_MAX_SPEED 7
#define MOUSEKEY_WHEEL_DELAY 0
#define TAPPING_TOGGLE 1
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
#define TAPPING_TERM 200
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
added ergodox
2015-10-26 20:32:37 +00:00
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
Make brightness easier to change Don't make the #defines unconditional, make them optional so users can override them with per-keymap settings more easily.
2017-11-23 21:34:50 +00:00
#ifndef LED_BRIGHTNESS_LO
Move some of the Ergodox config settings to shared
2016-07-09 08:26:15 +00:00
#define LED_BRIGHTNESS_LO 15
Make brightness easier to change Don't make the #defines unconditional, make them optional so users can override them with per-keymap settings more easily.
2017-11-23 21:34:50 +00:00
#endif
#ifndef LED_BRIGHTNESS_HI
Move some of the Ergodox config settings to shared
2016-07-09 08:26:15 +00:00
#define LED_BRIGHTNESS_HI 255
Make brightness easier to change Don't make the #defines unconditional, make them optional so users can override them with per-keymap settings more easily.
2017-11-23 21:34:50 +00:00
#endif
#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_HI)
Move some of the Ergodox config settings to shared
2016-07-09 08:26:15 +00:00
enable rgblight by default for ez
2016-11-29 05:09:56 +00:00
/* ws2812 RGB LED */
#define RGB_DI_PIN D7
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 15 // Number of LEDs
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 255
#define RGBLIGHT_VAL_STEP 12
disables space cadet rollover
2017-04-03 19:11:42 +00:00
/* fix space cadet rollover issue */
#define DISABLE_SPACE_CADET_ROLLOVER
turn off rgb_midi in ez
2017-01-23 18:55:24 +00:00
// #define RGB_MIDI
enable rgblight by default for ez
2016-11-29 05:09:56 +00:00
#define RGBW_BB_TWI
rgb clean-up, api clean-up
2016-12-19 16:18:18 +00:00
#define RGBW 1
Move some of the Ergodox config settings to shared
2016-07-09 08:26:15 +00:00
improve ergodox ez performance With these changes, the ergodox ez goes from 315 scans per second when no keys are pressed (~3.17ms/scan) to 447 (~2.24ms/scan). The changes to the pin read are just condensing the logic, and replacing a lot of conditional operations with a single bitwise inversion. The change to row scanning is more significant, and merits explanation. In general, you can only scan one row of a keyboard at a time, because if you scan two rows, you no longer know which row is pulling a given column down. But in the Ergodox design, this isn't the case; the left hand is controlled by an I2C-based GPIO expander, and the columns and rows are *completely separate* electrically from the columns and rows on the right-hand side. So simply reading rows in parallel offers two significant improvements. One is that we no longer need the 30us delay after each right-hand row, because we're spending more than 30us communicating with the left hand over i2c. Another is that we're no longer wastefully sending i2c messages to the left hand to unselect rows when no rows had actually been selected in the first place. These delays were, between them, coming out to nearly 30% of the time spent in each scan. Signed-off-by: seebs <seebs@seebs.net>
2017-11-18 22:11:26 +00:00
/* "debounce" is measured in keyboard scans. Some users reported
* needing values as high as 15, which was at the time around 50ms.
* If you don't define it here, the matrix code will default to
* 5, which is now closer to 10ms, but still plenty according to
* manufacturer specs.
*
* Default is quite high, because of reports with some production
* runs seeming to need it. This may change when configuration for
* this is more directly exposed.
*/
Change to per-key eager debouncing for ErgoDox EZ. Empirically, waiting for N consecutive identical scans as a debouncing strategy doesn't work very well for the ErgoDox EZ where scans are very slow compared to most keyboards. Instead, debounce the signals by eagerly reporting a change as soon as one scan observes it, but then ignoring further changes from that key for the next N scans. This is implemented by keeping an extra matrix of uint8 countdowns, such that only keys whose countdown is currently zero are eligible to change. When we do observe a change, we bump that key's countdown to DEBOUNCE. During each scan, every nonzero countdown is decremented. With this approach to debouncing, much higher debounce constants are tolerable, because latency does not increase with the constant, and debounce countdowns on one key do not interfere with events on other keys. The only negative effect of increasing the constant is that the minimum duration of a keypress increases. Perhaps I'm just extremely unlucky w.r.t. key switch quality, but I saw occasional bounces even with DEBOUNCE=10; with 15, I've seen none so far. That's around 47ms, which seems like an absolutely insane amount of time for a key to be bouncy, but at least it works.
2017-04-26 22:29:39 +00:00
#define DEBOUNCE 15
added ergodox
2015-10-26 20:32:37 +00:00
Adds prevent stuck modifiers to EZ default
2017-05-29 00:05:37 +00:00
#define PREVENT_STUCK_MODIFIERS
Update config.h
2017-01-02 14:57:39 +00:00
#define USB_MAX_POWER_CONSUMPTION 500
Allow power consumption to be set per-keyboard.
2016-12-15 04:24:40 +00:00
a quick attempt
2018-05-09 13:43:36 +00:00
// RGB backlight
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 24
#define DRIVER_2_LED_TOTAL 24
#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
#define RGB_MATRIX_SKIP_FRAMES 10
adds indication up to layer 7
2017-11-06 14:00:05 +00:00
// #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
disables Shine LED layer indication for now
2017-11-09 13:12:43 +00:00
/* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */
/* #define RGBLIGHT_COLOR_LAYER_2 0xFF, 0x00, 0x00 */
/* #define RGBLIGHT_COLOR_LAYER_3 0x00, 0xFF, 0x00 */
/* #define RGBLIGHT_COLOR_LAYER_4 0xFF, 0xFF, 0x00 */
/* #define RGBLIGHT_COLOR_LAYER_5 0x00, 0xFF, 0xFF */
/* #define RGBLIGHT_COLOR_LAYER_6 0xFF, 0x00, 0xFF */
/* #define RGBLIGHT_COLOR_LAYER_7 0xFF, 0xFF, 0xFF */
adds indication up to layer 7
2017-11-06 14:00:05 +00:00
added ergodox
2015-10-26 20:32:37 +00:00
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//#define DEBUG_MATRIX_SCAN_RATE
#endif
Reference in New Issue Copy Permalink