qmk-firmware/keyboards/cod67/readme.md

# Gray COD67

![cod67](imgur.com image replace me!)

The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port. 

There were only 75 units made worldwide. 

Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
Hardware Supported: Gray COD67 
Hardware Availability: [Zfrontier](https://en.zfrontier.com/products/cod67)  

At this time, flashing ONLY works on Windows systems. 

To put in bootloader mode, hold the `Esc` key while plugging in the USB cable. 

The COD67 will show up as a drive. 

Make example for this keyboard (after setting up your build environment):

    make cod67:default:bin

See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

Rename the resulting `.bin` file to `cod67.bin`.

Drag and drop `cod67.bin` to the drive, overwriting the previous `cod67.bin` stored on it. 

Press the `Esc` key again to reset the board. You are now ready to type!

## Notes
The backlight pin is attached to a non PWM pin `D4` so backlight is only on/off.
COD67 "Support" (#3332) * preliminary Gray COD67 checkin * Get part of the switch matrix prepped * finish switch matrix * mock the pins and keymap for now * add keymap fixes * update readme with flashing instructions * keymap fix * Add more flashing and notes info to readme * remove un needed file * fix comments * add QMK Configurator Support 2018-07-07 18:47:24 +00:00			`# Gray COD67`

			`![cod67](imgur.com image replace me!)`

			`The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port.`

			`There were only 75 units made worldwide.`

			`Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)`
			`Hardware Supported: Gray COD67`
			`Hardware Availability: [Zfrontier](https://en.zfrontier.com/products/cod67)`

			`At this time, flashing ONLY works on Windows systems.`

			To put in bootloader mode, hold the `Esc` key while plugging in the USB cable.

			`The COD67 will show up as a drive.`

			`Make example for this keyboard (after setting up your build environment):`

			`make cod67:default:bin`

Modified URLs to point to new locations 2019-01-13 00:51:21 +00:00			`See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.`
COD67 "Support" (#3332) * preliminary Gray COD67 checkin * Get part of the switch matrix prepped * finish switch matrix * mock the pins and keymap for now * add keymap fixes * update readme with flashing instructions * keymap fix * Add more flashing and notes info to readme * remove un needed file * fix comments * add QMK Configurator Support 2018-07-07 18:47:24 +00:00
			Rename the resulting `.bin` file to `cod67.bin`.

			Drag and drop `cod67.bin` to the drive, overwriting the previous `cod67.bin` stored on it.

			Press the `Esc` key again to reset the board. You are now ready to type!

			`## Notes`
			The backlight pin is attached to a non PWM pin `D4` so backlight is only on/off.