qmk-firmware/keyboards/snampad/rules.mk

83 lines
3.3 KiB
Makefile
Raw Normal View History

Pti keymaps (#6025) * created new folder to port my old layout * removed Colemak, enabled backlight. * fixed backlight support * added Ctrl/Esc + Shift/Enter double function keys * made planck compatible with Atreus board, including docs * enable backlight control * make planck more compatible with atreus layout * migrate to qwerty and separate alt-space * adding ok64 and redox layouts * fix dot in numerical pad * fix dot in dvorak layout * added redox and pro micro version of snampad * add arrows on right mod keys and map PrtScr on Fn P * add keys to swap between mac and windows * added escape to redox layout * added printscreen key * moved layout closer to what I am used to. * swap spc and bspc, add ctrl to quot * qwertified atreus layout * fix for compile errors when RGB or BACKLIGHT disabled * add customized keymap for the m65a * Reverted unintended change in default keymap. * Remove unused code in my keymap and modernized tap hold keys * Update keyboards/snampad/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/snampad.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/keymaps/default/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/planck/keymaps/ptillemans/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/jc65/v32a/keymaps/ptillemans/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * cleanup snampad layout * Update keyboards/snampad/snampad.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * further mmended cleaning - removed obsolete Backspace handling in jc65 keymap - improved shift detection - modernized planck keymap - added details to snampad readme - other recommended refactors in snampad
2019-06-03 19:09:01 +00:00
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = caterina
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
LAYOUTS = numpad_6x4