hhkb: Add Makefile.jp for HHKB JP

This commit is contained in:
Jun Wako 2015-01-11 01:54:17 +09:00
parent 3dbb762dcc
commit 10a6b2c7d8
3 changed files with 13 additions and 6 deletions

View File

@ -121,11 +121,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover
#HHKB_JP = yes # HHKB JP support
ifdef HHKB_JP
OPT_DEFS += -DHHKB_JP
endif
#
# Keymap file
#
@ -140,6 +135,11 @@ else
endif
ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
OPT_DEFS += -DHHKB_JP
endif
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)

View File

@ -0,0 +1,2 @@
HHKB_JP = yes
include Makefile

View File

@ -43,12 +43,15 @@ See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HH
See [this document](../../doc/build.md) first.
### Configuration
Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile`.
If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile` or use `Makefile.jp` instead of `Makefile`.
If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. At least PJRC Teensy requires changing `BOOTLOADER_SIZE` to 512.
### Build
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like:
$ make KEYMAP=[hasu|hhkb|spacefn|<name>]
$ make -f Makefile.jp KEYMAP=[jp|<name>] # for HHKB JP
### Program
@ -57,10 +60,12 @@ First, push reset button on board to start bootloader.
This command programs the controller with [dfu-programmer] if the tool is installed and configured properly.
$ make dfu
$ make -f Makefile.jp dfu # for HHKB JP
Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available.
$ make flip
$ make -f Makefile.jp flip # for HHKB JP
Use [Teensy Loader] if your controller is Teensy/Teensy++.