From 15f6278aa623ceda4c220daee1cbedb9e38e6a97 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 2 Nov 2018 12:31:40 -0400 Subject: [PATCH] Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef --- docs/internals_gpio_control.md | 2 +- quantum/config_common.h | 158 ++++++++++++++-------- quantum/quantum.h | 20 +-- tmk_core/protocol/vusb/usbdrv/usbdrvasm.S | 8 +- 4 files changed, 119 insertions(+), 69 deletions(-) diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md index 21643d30c..083e69664 100644 --- a/docs/internals_gpio_control.md +++ b/docs/internals_gpio_control.md @@ -12,7 +12,7 @@ The following functions can provide basic control of GPIOs and are found in `qua |`setPinInputHigh(pin)`|Set pin as input with build in pull-up | |`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)| |`setPinOutput(pin)` |Set pin as output | -|`writePinHige(pin)` |Set pin level as high, assuming it is an output | +|`writePinHigh(pin)` |Set pin level as high, assuming it is an output | |`writePinLow(pin)` |Set pin level as low, assuming it is an output | |`writePin(pin, level)`|Set pin level, assuming it is an output | |`readPin(pin)` |Returns the level of the pin | diff --git a/quantum/config_common.h b/quantum/config_common.h index 288617255..cbff372ea 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -1,4 +1,4 @@ -/* Copyright 2015-2017 Jack Humbert +/* Copyright 2015-2018 Jack Humbert * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,8 +14,7 @@ * along with this program. If not, see . */ -#ifndef CONFIG_DEFINITIONS_H -#define CONFIG_DEFINITIONS_H +#pragma once /* diode directions */ #define COL2ROW 0 @@ -23,57 +22,108 @@ #define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */ #ifdef __AVR__ - /* I/O pins */ - #ifndef F0 - #define B0 0x30 - #define B1 0x31 - #define B2 0x32 - #define B3 0x33 - #define B4 0x34 - #define B5 0x35 - #define B6 0x36 - #define B7 0x37 - #define C0 0x60 - #define C1 0x61 - #define C2 0x62 - #define C3 0x63 - #define C4 0x64 - #define C5 0x65 - #define C6 0x66 - #define C7 0x67 - #define D0 0x90 - #define D1 0x91 - #define D2 0x92 - #define D3 0x93 - #define D4 0x94 - #define D5 0x95 - #define D6 0x96 - #define D7 0x97 - #define E0 0xC0 - #define E1 0xC1 - #define E2 0xC2 - #define E3 0xC3 - #define E4 0xC4 - #define E5 0xC5 - #define E6 0xC6 - #define E7 0xC7 - #define F0 0xF0 - #define F1 0xF1 - #define F2 0xF2 - #define F3 0xF3 - #define F4 0xF4 - #define F5 0xF5 - #define F6 0xF6 - #define F7 0xF7 - #define A0 0x00 - #define A1 0x01 - #define A2 0x02 - #define A3 0x03 - #define A4 0x04 - #define A5 0x05 - #define A6 0x06 - #define A7 0x07 + #ifndef __ASSEMBLER__ + #include #endif + #define PORT_SHIFTER 4 // this may be 4 for all AVR chips + + // If you want to add more to this list, reference the PINx definitions in these header + // files: https://github.com/vancegroup-mirrors/avr-libc/tree/master/avr-libc/include/avr + + #if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__) + #define ADDRESS_BASE 0x00 + #define PINB_ADDRESS 0x3 + #define PINC_ADDRESS 0x6 + #define PIND_ADDRESS 0x9 + #define PINE_ADDRESS 0xC + #define PINF_ADDRESS 0xF + #elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) + #define ADDRESS_BASE 0x00 + #define PINB_ADDRESS 0x3 + #define PINC_ADDRESS 0x6 + #define PIND_ADDRESS 0x9 + #elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) + #define ADDRESS_BASE 0x00 + #define PINA_ADDRESS 0x0 + #define PINB_ADDRESS 0x3 + #define PINC_ADDRESS 0x6 + #define PIND_ADDRESS 0x9 + #define PINE_ADDRESS 0xC + #define PINF_ADDRESS 0xF + #elif defined(__AVR_ATmega32A__) + #define ADDRESS_BASE 0x10 + #define PIND_ADDRESS 0x0 + #define PINC_ADDRESS 0x3 + #define PINB_ADDRESS 0x6 + #define PINA_ADDRESS 0x9 + #else + #error "Pins are not defined" + #endif + + /* I/O pins */ + #define PINDEF(port, pin) ((PIN##port##_ADDRESS << PORT_SHIFTER) | pin) + + #ifdef PORTA + #define A0 PINDEF(A, 0) + #define A1 PINDEF(A, 1) + #define A2 PINDEF(A, 2) + #define A3 PINDEF(A, 3) + #define A4 PINDEF(A, 4) + #define A5 PINDEF(A, 5) + #define A6 PINDEF(A, 6) + #define A7 PINDEF(A, 7) + #endif + #ifdef PORTB + #define B0 PINDEF(B, 0) + #define B1 PINDEF(B, 1) + #define B2 PINDEF(B, 2) + #define B3 PINDEF(B, 3) + #define B4 PINDEF(B, 4) + #define B5 PINDEF(B, 5) + #define B6 PINDEF(B, 6) + #define B7 PINDEF(B, 7) + #endif + #ifdef PORTC + #define C0 PINDEF(C, 0) + #define C1 PINDEF(C, 1) + #define C2 PINDEF(C, 2) + #define C3 PINDEF(C, 3) + #define C4 PINDEF(C, 4) + #define C5 PINDEF(C, 5) + #define C6 PINDEF(C, 6) + #define C7 PINDEF(C, 7) + #endif + #ifdef PORTD + #define D0 PINDEF(D, 0) + #define D1 PINDEF(D, 1) + #define D2 PINDEF(D, 2) + #define D3 PINDEF(D, 3) + #define D4 PINDEF(D, 4) + #define D5 PINDEF(D, 5) + #define D6 PINDEF(D, 6) + #define D7 PINDEF(D, 7) + #endif + #ifdef PORTE + #define E0 PINDEF(E, 0) + #define E1 PINDEF(E, 1) + #define E2 PINDEF(E, 2) + #define E3 PINDEF(E, 3) + #define E4 PINDEF(E, 4) + #define E5 PINDEF(E, 5) + #define E6 PINDEF(E, 6) + #define E7 PINDEF(E, 7) + #endif + #ifdef PORTF + #define F0 PINDEF(F, 0) + #define F1 PINDEF(F, 1) + #define F2 PINDEF(F, 2) + #define F3 PINDEF(F, 3) + #define F4 PINDEF(F, 4) + #define F5 PINDEF(F, 5) + #define F6 PINDEF(F, 6) + #define F7 PINDEF(F, 7) + #endif + #elif defined(PROTOCOL_CHIBIOS) #define A0 PAL_LINE(GPIOA, 0) #define A1 PAL_LINE(GPIOA, 1) @@ -200,5 +250,3 @@ #define API_SYSEX_MAX_SIZE 32 #include "song_list.h" - -#endif diff --git a/quantum/quantum.h b/quantum/quantum.h index 1d3ee033f..fe670c8eb 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -140,26 +140,28 @@ extern uint32_t default_layer_state; //Function substitutions to ease GPIO manipulation #ifdef __AVR__ + #define PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + (p >> PORT_SHIFTER) + offset) + #define pin_t uint8_t - #define setPinInput(pin) _SFR_IO8((pin >> 4) + 1) &= ~ _BV(pin & 0xF) + #define setPinInput(pin) PIN_ADDRESS(pin, 1) &= ~ _BV(pin & 0xF) #define setPinInputHigh(pin) ({\ - _SFR_IO8((pin >> 4) + 1) &= ~ _BV(pin & 0xF);\ - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);\ + PIN_ADDRESS(pin, 1) &= ~ _BV(pin & 0xF);\ + PIN_ADDRESS(pin, 2) |= _BV(pin & 0xF);\ }) #define setPinInputLow(pin) _Static_assert(0, "AVR Processors cannot impliment an input as pull low") - #define setPinOutput(pin) _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF) + #define setPinOutput(pin) PIN_ADDRESS(pin, 1) |= _BV(pin & 0xF) - #define writePinHigh(pin) _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF) - #define writePinLow(pin) _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF) + #define writePinHigh(pin) PIN_ADDRESS(pin, 2) |= _BV(pin & 0xF) + #define writePinLow(pin) PIN_ADDRESS(pin, 2) &= ~_BV(pin & 0xF) static inline void writePin(pin_t pin, uint8_t level){ if (level){ - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); + PIN_ADDRESS(pin, 2) |= _BV(pin & 0xF); } else { - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); + PIN_ADDRESS(pin, 2) &= ~_BV(pin & 0xF); } } - #define readPin(pin) (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)) + #define readPin(pin) (PIN_ADDRESS(pin, 0) & _BV(pin & 0xF)) #elif defined(PROTOCOL_CHIBIOS) #define pin_t ioline_t #define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT) diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S b/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S index 45fcf1831..2e8097da9 100644 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S +++ b/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S @@ -118,7 +118,7 @@ RTMODEL "__rt_version", "3" # define polyH r21 # define scratch r23 -#else /* __IAR_SYSTEMS_ASM__ */ +#else /* __IAR_SYSTEMS_ASM__ */ /* Register assignments for usbCrc16 on gcc */ /* Calling conventions on gcc: * First parameter passed in r24/r25, second in r22/23 and so on. @@ -151,7 +151,7 @@ RTMODEL "__rt_version", "3" ; unsigned table(unsigned char x) ; { ; unsigned value; -; +; ; value = (unsigned)x << 6; ; value ^= (unsigned)x << 7; ; if(parity(x)) @@ -161,7 +161,7 @@ RTMODEL "__rt_version", "3" ; unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen) ; { ; unsigned crc = 0xffff; -; +; ; while(argLen--) ; crc = table(lo8(crc) ^ *argPtr++) ^ hi8(crc); ; return ~crc; @@ -299,7 +299,7 @@ usbCrc16Append: # define cnt16H r31 # define cntH r18 -#else /* __IAR_SYSTEMS_ASM__ */ +#else /* __IAR_SYSTEMS_ASM__ */ /* Register assignments for usbMeasureFrameLength on gcc */ /* Calling conventions on gcc: * First parameter passed in r24/r25, second in r22/23 and so on.