adds support for Phantom TKL keyboard (#399)

ANSI 125 layout, capslock and scrolllock implemented, support for
WS2812LED strip included.
This commit is contained in:
TerryMathews 2016-06-12 22:26:47 -04:00 committed by Jack Humbert
parent 6955719075
commit 25d4772754
9 changed files with 1979 additions and 0 deletions

112
keyboard/phantom/Makefile Normal file
View File

@ -0,0 +1,112 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
SRC = led.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870)
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150)
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE ?= no
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
ifndef QUANTUM_DIR
include ../../Makefile
endif

91
keyboard/phantom/config.h Normal file
View File

@ -0,0 +1,91 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0003
#define MANUFACTURER PHANTOM
#define PRODUCT PHANTOM RGB MOD
#define DESCRIPTION QMK keyboard firmware for PHANTOM TKL
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 17
// ROWS: Top to bottom, COLS: Left to right
/* Row pin configuration
*/
#define MATRIX_ROW_PINS { B5, B4, B3, B2, B1, B0 }
/* Column pin configuration
*/
#define MATRIX_COL_PINS { D5, C7, C6, D4, D0, E6, F0, F1, F4, F5, F6, F7, D7, D6, D1, D2, D3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Underlight configuration
*/
#define ws2812_PORTREG PORTE
#define ws2812_DDRREG DDRE
#define ws2812_pin 2
#define RGBLED_NUM 20 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,169 @@
#include "phantom.h"
#ifdef RGBLIGHT_ENABLE
#include "rgblight.h"
#endif
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer
* ,-----------------------------------------------------------------------------.
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus|
* |-----------------------------------------------------------| |--------------|
* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp|
* |-----------------------------------------------------------| |--------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn|
* |-----------------------------------------------------------| `--------------'
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
* |-----------------------------------------------------------| ,----.
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up |
* |-----------------------------------------------------------| ,-------------.
* |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig |
* `-----------------------------------------------------------' `-------------'
*/
[_BL] = KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
* ,-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------| |--------------|
* | | | | | | | | | | | | | | Reset | | | | |
* |-----------------------------------------------------------| |--------------|
* | | | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------| `--------------'
* | | | | | | | | | | | | | |
* |-----------------------------------------------------------| ,----.
* | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | |
* |-----------------------------------------------------------| ,-------------.
* | | | | | | | | | | | | |
* `-----------------------------------------------------------' `-------------'
*/
[_FL] = KEYMAP(
#ifdef RGBLIGHT_ENABLE
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \
KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
#else
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
#endif
};
enum function_id {
SHIFT_ESC,
#ifdef RGBLIGHT_ENABLE
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL
#endif
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC),
#ifdef RGBLIGHT_ENABLE
[1] = ACTION_FUNCTION(RGBLED_TOGGLE),
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE),
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
#endif
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask;
switch (id) {
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
//led operations
#ifdef RGBLIGHT_ENABLE
case RGBLED_TOGGLE:
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
#endif
}
}

44
keyboard/phantom/led.c Normal file
View File

@ -0,0 +1,44 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
void led_init_ports() {
// * Set our LED pins as output
DDRB |= (1<<6);
DDRB |= (1<<7);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// Turn capslock on
PORTB |= (1<<6);
} else {
// Turn capslock off
PORTB &= ~(1<<6);
}
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
// Turn scrolllock on
PORTB |= (1<<7);
} else {
// Turn scrolllock off
PORTB &= ~(1<<7);
}
}

View File

@ -0,0 +1,28 @@
#include "phantom.h"
__attribute__ ((weak))
void matrix_init_user(void) {
// leave these blank
};
__attribute__ ((weak))
void matrix_scan_user(void) {
// leave these blank
};
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
if (matrix_init_user) {
(*matrix_init_user)();
}
led_init_ports();
};
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
if (matrix_scan_user) {
(*matrix_scan_user)();
}
};

View File

@ -0,0 +1,46 @@
#ifndef PHANTOM_H
#define PHANTOM_H
#include "matrix.h"
#include "keymap_common.h"
#include <stddef.h>
/* Phantom matrix layout
* ,-----------------------------------------------------------------------------.
* |00 |02| 03| 04| 05| | 06| 07| 08| 09| | 0a|0b |0c |0d | |0e |0f |0g |
* |-----------------------------------------------------------| |--------------|
* | 01| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1d | |1e |1f |1g |
* |-----------------------------------------------------------| |--------------|
* |20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c| 2d| | 2e | 2f | 2g |
* |-----------------------------------------------------------| `--------------'
* |30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
* |-----------------------------------------------------------| ,----.
* | 40 | 42| 43| 44| 45| 46| 47| 48| 49| 4a| 4b| 4d | | 4f |
* |-----------------------------------------------------------| ,-------------.
* | 50 | 51 | 52 | 57 |5a | 5b | 5c | 5d | | 5e| 5f | 5g |
* `-----------------------------------------------------------' `-------------'
*/
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
k00, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
k01, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1e, k1f, k1g, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4f, \
k50, k51, k52, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1d, k1e, k1f, k1g}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g}, \
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3d, k3d, k3d, k3d}, \
{k40, k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4d, k4f, k4f, k4f}, \
{k50, k51, k52, k57, k57, k57, k57, k57, k57, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g} \
}
void matrix_init_user(void);
void matrix_scan_user(void);
#endif

BIN
keyboard/phantom/pinout.jpg Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 84 KiB

View File

@ -0,0 +1 @@
For WS2812B LED strip support, connect DIN from strip to PE2 on Teensy (see reference image pinout.jpg)