Set MCU for some F103 boards (#8459)
This commit is contained in:
Ryan
GitHub
parent
c2013f0b7c
commit
3a0f11eb27
|
|
@ -1,24 +1,11 @@
|
|||
SRC += matrix.c
|
||||
QUANTUM_LIB_SRC += i2c_master.c
|
||||
|
||||
CFLAGS += "-Wno-error=deprecated"
|
||||
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
# MCU name
|
||||
MCU = STM32F103
|
||||
|
||||
MCU_LDSCRIPT = stm32f103_bootloader
|
||||
|
||||
MCU_STARTUP = stm32f1xx
|
||||
|
||||
BOARD = ERGODOX_STM32_BOARD
|
||||
|
||||
MCU = cortex-m3
|
||||
|
||||
ARMV = 7
|
||||
|
||||
OPT_DEFS =
|
||||
|
||||
EXTRAFLAGS=-O0 -g
|
||||
CFLAGS += "-Wno-error=deprecated"
|
||||
EXTRAFLAGS = -O0 -g
|
||||
|
||||
BOOTMAGIC_ENABLE = no
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
|
|
@ -31,6 +18,8 @@ CUSTOM_MATRIX = yes # Custom matrix file
|
|||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
UNICODE_ENABLE = yes # Unicode
|
||||
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
|
||||
SRC += matrix.c
|
||||
QUANTUM_LIB_SRC += i2c_master.c
|
||||
|
|
|
|||
|
|
@ -1,51 +1,9 @@
|
|||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||
#MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||
#BOARD = GENERIC_STM32_F103
|
||||
|
||||
# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) // Modified by Xydane
|
||||
OPT_DEFS =
|
||||
MCU_LDSCRIPT = STM32F103x8
|
||||
BOARD = GENERIC_STM32_F103
|
||||
|
||||
# MAPLE MINI
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
|
||||
# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
|
||||
# BOARD = MAPLEMINI_STM32_F103
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f1xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m3
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# MCU name
|
||||
MCU = STM32F103
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
|
|
|||
|
|
@ -1,41 +1,9 @@
|
|||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
# MCU name
|
||||
MCU = STM32F103
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
MCU_LDSCRIPT = jm60_bootloader
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f1xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = JM60_BOARD
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m3
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 7
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
||||
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
|
||||
OPT_DEFS =
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
|
@ -51,10 +19,9 @@ CUSTOM_MATRIX = yes # Custom matrix file
|
|||
BACKLIGHT_ENABLE = no
|
||||
VISUALIZER_ENABLE = no
|
||||
|
||||
#LED_DRIVER = is31fl3731c
|
||||
#LED_WIDTH = 16
|
||||
#LED_HEIGHT = 5
|
||||
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
|
|
|||
Loading…
Reference in New Issue