ADB to USB keyboard converter
This commit is contained in:
tmk
parent
1f5cd6d7dc
commit
56e098d76e
|
|
@ -0,0 +1,134 @@
|
|||
ADB Protocol
|
||||
============
|
||||
|
||||
Resources
|
||||
---------
|
||||
Apple IIgs Hardware Reference Second Edition [p80(Chapter6 p121)]
|
||||
ftp://ftp.apple.asimov.net/pub/apple_II/documentation/Apple%20IIgs%20Hardware%20Reference.pdf
|
||||
ADB Keycode
|
||||
http://72.0.193.250/Documentation/macppc/adbkeycodes/
|
||||
http://m0115.web.fc2.com/m0115.jpg
|
||||
ADB Signaling
|
||||
http://kbdbabel.sourceforge.net/doc/kbd_signaling_pcxt_ps2_adb.pdf
|
||||
ADB Overview & History
|
||||
http://en.wikipedia.org/wiki/Apple_Desktop_Bus
|
||||
Microchip Application Note: ADB device(with code for PIC16C)
|
||||
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1824&appnote=en011062
|
||||
AVR ATtiny2131 ADB to PS/2 converter(Japanese)
|
||||
http://hp.vector.co.jp/authors/VA000177/html/KeyBoardA5DEA5CBA5A2II.html
|
||||
|
||||
|
||||
Pinouts
|
||||
-------
|
||||
Female socket from the front
|
||||
|
||||
4o o3
|
||||
2o o1
|
||||
==
|
||||
|
||||
1: Data
|
||||
2: Power SW(low when press Power key)
|
||||
3: Vcc(5V)
|
||||
4: GND
|
||||
|
||||
|
||||
Commands
|
||||
--------
|
||||
ADB command is 1byte and consists of 4bit-address, 2bit-command
|
||||
type and 2bit-register. The commands are always sent by Host.
|
||||
|
||||
Command format:
|
||||
7 6 5 4 3 2 1 0
|
||||
| | | |------------ address
|
||||
| |-------- command type
|
||||
| |---- register
|
||||
|
||||
bits commands
|
||||
------------------------------------------------------
|
||||
- - - - 0 0 0 0 Send Request(reset all devices)
|
||||
A A A A 0 0 0 1 Flush(reset a device)
|
||||
- - - - 0 0 1 0 Reserved
|
||||
- - - - 0 0 1 1 Reserved
|
||||
- - - - 0 1 - - Reserved
|
||||
A A A A 1 0 R R Listen(write to a device)
|
||||
A A A A 1 1 R R Talk(read from a device)
|
||||
|
||||
The command to read keycodes from keyboard is 0x2C which
|
||||
consist of keyboard address 2 and Talk against register 0.
|
||||
|
||||
Address:
|
||||
2: keyboard
|
||||
3: mice
|
||||
|
||||
Registers:
|
||||
0: application(keyobard/mice use to store its data.)
|
||||
1: application
|
||||
2: application
|
||||
3: status and command
|
||||
|
||||
|
||||
Communication
|
||||
-------------
|
||||
This is a minimum information for keyboard communication.
|
||||
See "Resources" for detail.
|
||||
|
||||
Signaling:
|
||||
|
||||
~~~~____________~~||||||||||||__~~~~~_~~|||||||||||||||__~~~~
|
||||
|
||||
|800us | |7 Command 0| | | |15-64 Data 0|Stopbit(0)
|
||||
+Attention | | | +Startbit(1)
|
||||
+Startbit(1) | +Tlt(140-260us)
|
||||
+stopbit(0)
|
||||
|
||||
Bit cells:
|
||||
|
||||
bit0: ______~~~
|
||||
65 :35us
|
||||
|
||||
bit1: ___~~~~~~
|
||||
35 :65us
|
||||
|
||||
bit0 low time: 60-70% of bit cell(42-91us)
|
||||
bit1 low time: 30-40% of bit cell(21-52us)
|
||||
bit cell time: 70-130us
|
||||
[from Apple IIgs Hardware Reference Second Edition]
|
||||
|
||||
Criterion for bit0/1:
|
||||
After 55us if line is low/high then bit is 0/1.
|
||||
|
||||
Attention & start bit:
|
||||
Host asserts low in 560-1040us then places start bit(1).
|
||||
|
||||
Tlt(Stop to Start):
|
||||
Bus stays high in 140-260us then device places start bit(1).
|
||||
|
||||
Global reset:
|
||||
Host asserts low in 2.8-5.2ms. All devices are forced to reset.
|
||||
|
||||
Send request from device(Srq):
|
||||
Device can request to send at commad(Global only?) stop bit.
|
||||
keep low for 300us to request.
|
||||
|
||||
|
||||
Keyboard data(register0)
|
||||
This 16bit data can contains 2 keycodes and 2 released flags.
|
||||
First keycode is palced in upper nibble. When one keyocode is sent,
|
||||
lower nibble is 0xFF.
|
||||
Release flag is 1 when key is released.
|
||||
|
||||
15 14 . . . . . 8 7 6 . . . . . 0
|
||||
| |keycode1 | |keycode2
|
||||
|released(1) |released(1)
|
||||
|
||||
Keycodes:
|
||||
Scancode consists of 7bit keycode and 1bit release flag.
|
||||
Device can send two keycodes at once. If just one keycode is sent
|
||||
keycode1 contains it and keyocode2 is 0xFF.
|
||||
|
||||
Power switch:
|
||||
You can read the state from PSW line(active low) however
|
||||
the switch has a special scancode 0x7F7F, so you can
|
||||
also read from Data line. It uses 0xFFFF for release scancode.
|
||||
|
||||
END_OF_ADB
|
||||
|
|
@ -0,0 +1,180 @@
|
|||
#include <stdbool.h>
|
||||
#include <util/delay.h>
|
||||
#include <avr/io.h>
|
||||
#include "adb.h"
|
||||
|
||||
|
||||
static inline void data_lo(void);
|
||||
static inline void data_hi(void);
|
||||
static inline bool data_in(void);
|
||||
#ifdef ADB_PSW_BIT
|
||||
static inline void psw_lo(void);
|
||||
static inline void psw_hi(void);
|
||||
static inline bool psw_in(void);
|
||||
#endif
|
||||
|
||||
static inline void attention(void);
|
||||
static inline void place_bit0(void);
|
||||
static inline void place_bit1(void);
|
||||
static inline void send_byte(uint8_t data);
|
||||
static inline bool read_bit(void);
|
||||
static inline uint8_t read_byte(void);
|
||||
static inline uint8_t wait_data_lo(uint8_t us);
|
||||
static inline uint8_t wait_data_hi(uint8_t us);
|
||||
|
||||
|
||||
void adb_host_init(void)
|
||||
{
|
||||
data_hi();
|
||||
#ifdef ADB_PSW_BIT
|
||||
psw_hi();
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef ADB_PSW_BIT
|
||||
bool adb_host_psw(void)
|
||||
{
|
||||
return psw_in();
|
||||
}
|
||||
#endif
|
||||
|
||||
uint16_t adb_host_kbd_recv(void)
|
||||
{
|
||||
uint16_t data = 0;
|
||||
attention();
|
||||
send_byte(0x2C); // Addr:2, Cmd:talk(11), Reg:0(00)
|
||||
place_bit0(); // Stopbit
|
||||
if (!wait_data_lo(0xFF)) // Stop to Start(140-260us)
|
||||
return 0; // No data to send
|
||||
if (!read_bit()) // Startbit(1)
|
||||
return -2;
|
||||
data = read_byte();
|
||||
data = (data<<8) | read_byte();
|
||||
if (read_bit()) // Stopbit(0)
|
||||
return -3;
|
||||
return data;
|
||||
}
|
||||
|
||||
|
||||
static inline void data_lo()
|
||||
{
|
||||
ADB_DDR |= (1<<ADB_DATA_BIT);
|
||||
ADB_PORT &= ~(1<<ADB_DATA_BIT);
|
||||
}
|
||||
static inline void data_hi()
|
||||
{
|
||||
ADB_PORT |= (1<<ADB_DATA_BIT);
|
||||
ADB_DDR &= ~(1<<ADB_DATA_BIT);
|
||||
}
|
||||
static inline bool data_in()
|
||||
{
|
||||
ADB_PORT |= (1<<ADB_DATA_BIT);
|
||||
ADB_DDR &= ~(1<<ADB_DATA_BIT);
|
||||
return ADB_PIN&(1<<ADB_DATA_BIT);
|
||||
}
|
||||
|
||||
#ifdef ADB_PSW_BIT
|
||||
static inline void psw_lo()
|
||||
{
|
||||
ADB_DDR |= (1<<ADB_PSW_BIT);
|
||||
ADB_PORT &= ~(1<<ADB_PSW_BIT);
|
||||
}
|
||||
static inline void psw_hi()
|
||||
{
|
||||
ADB_PORT |= (1<<ADB_PSW_BIT);
|
||||
ADB_DDR &= ~(1<<ADB_PSW_BIT);
|
||||
}
|
||||
static inline bool psw_in()
|
||||
{
|
||||
ADB_PORT |= (1<<ADB_PSW_BIT);
|
||||
ADB_DDR &= ~(1<<ADB_PSW_BIT);
|
||||
return ADB_PIN&(1<<ADB_PSW_BIT);
|
||||
}
|
||||
#endif
|
||||
|
||||
static inline void attention(void)
|
||||
{
|
||||
data_lo();
|
||||
_delay_us(700);
|
||||
place_bit1();
|
||||
}
|
||||
|
||||
static inline void place_bit0(void)
|
||||
{
|
||||
data_lo();
|
||||
_delay_us(65);
|
||||
data_hi();
|
||||
_delay_us(35);
|
||||
}
|
||||
|
||||
static inline void place_bit1(void)
|
||||
{
|
||||
data_lo();
|
||||
_delay_us(35);
|
||||
data_hi();
|
||||
_delay_us(65);
|
||||
}
|
||||
|
||||
static inline void send_byte(uint8_t data)
|
||||
{
|
||||
for (int i = 0; i < 8; i++) {
|
||||
if (data&(0x80>>i))
|
||||
place_bit1();
|
||||
else
|
||||
place_bit0();
|
||||
}
|
||||
}
|
||||
|
||||
static inline bool read_bit(void)
|
||||
{
|
||||
// ADB Bit Cells
|
||||
//
|
||||
// bit0: ______~~~
|
||||
// 65 :35us
|
||||
//
|
||||
// bit1: ___~~~~~~
|
||||
// 35 :65us
|
||||
//
|
||||
// bit0 low time: 60-70% of bit cell(42-91us)
|
||||
// bit1 low time: 30-40% of bit cell(21-52us)
|
||||
// bit cell time: 70-130us
|
||||
// [from Apple IIgs Hardware Reference Second Edition]
|
||||
//
|
||||
// After 55us if data line is low/high then bit is 0/1.
|
||||
// Too simple to rely on?
|
||||
bool bit;
|
||||
wait_data_lo(75); // wait the beginning of bit cell
|
||||
_delay_us(55);
|
||||
bit = data_in();
|
||||
wait_data_hi(36); // wait high part of bit cell
|
||||
return bit;
|
||||
}
|
||||
|
||||
static inline uint8_t read_byte(void)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
for (int i = 0; i < 8; i++) {
|
||||
data <<= 1;
|
||||
if (read_bit())
|
||||
data = data | 1;
|
||||
}
|
||||
return data;
|
||||
}
|
||||
|
||||
static inline uint8_t wait_data_lo(uint8_t us)
|
||||
{
|
||||
while (data_in() && us) {
|
||||
_delay_us(1);
|
||||
us--;
|
||||
}
|
||||
return us;
|
||||
}
|
||||
|
||||
static inline uint8_t wait_data_hi(uint8_t us)
|
||||
{
|
||||
while (!data_in() && us) {
|
||||
_delay_us(1);
|
||||
us--;
|
||||
}
|
||||
return us;
|
||||
}
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
#ifndef ADB_H
|
||||
#define ADB_H
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#if !(defined(ADB_PORT) && \
|
||||
defined(ADB_PIN) && \
|
||||
defined(ADB_DDR) && \
|
||||
defined(ADB_DATA_BIT))
|
||||
# error "ADB port setting is required in config.h"
|
||||
#endif
|
||||
|
||||
// ADB host
|
||||
void adb_host_init(void);
|
||||
bool adb_host_psw(void);
|
||||
uint16_t adb_host_kbd_recv(void);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,82 @@
|
|||
# Hey Emacs, this is a -*- makefile -*-
|
||||
#----------------------------------------------------------------------------
|
||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
|
||||
#
|
||||
# Released to the Public Domain
|
||||
#
|
||||
# Additional material for this makefile was written by:
|
||||
# Peter Fleury
|
||||
# Tim Henigan
|
||||
# Colin O'Flynn
|
||||
# Reiner Patommel
|
||||
# Markus Pfaff
|
||||
# Sander Pool
|
||||
# Frederik Rouleau
|
||||
# Carlos Lamas
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device, using avrdude.
|
||||
# Please customize the avrdude settings below first!
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = tmk_adb
|
||||
|
||||
# Directory common source filess exist
|
||||
COMMON_DIR = ..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
TARGET_SRC = keymap.c \
|
||||
matrix.c \
|
||||
adb.c
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
|
||||
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
include $(COMMON_DIR)/Makefile.common
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
ADB to USB keyboard converter
|
||||
=============================
|
||||
|
||||
This firmware converts ADB keyboard protocol to USB.
|
||||
|
||||
Build
|
||||
-----
|
||||
0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data).
|
||||
PSW line is optional. See ADB.txt for details.
|
||||
1. Define following macros for ADB connection in config.h:
|
||||
ADB_PORT
|
||||
ADB_PIN
|
||||
ADB_DDR
|
||||
ADB_DATA_BIT
|
||||
ADB_PSW_BIT
|
||||
2. make
|
||||
3. program Teensy.
|
||||
|
||||
EOF
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
/* controller configuration */
|
||||
#include "controller_teensy.h"
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0ADB
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT ADB keyboard converter
|
||||
#define DESCRIPTION convert ADB keyboard to USB
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 16 // keycode bit: 3-0
|
||||
#define MATRIX_COLS 8 // keycode bit: 6-4
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* USB NKey Rollover */
|
||||
#ifdef USB_NKRO_ENABLE
|
||||
#endif
|
||||
|
||||
/* mouse keys */
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
# define MOUSEKEY_DELAY_TIME 192
|
||||
#endif
|
||||
|
||||
/* PS/2 mouse */
|
||||
#ifdef PS2_MOUSE_ENABLE
|
||||
# define PS2_CLOCK_PORT PORTF
|
||||
# define PS2_CLOCK_PIN PINF
|
||||
# define PS2_CLOCK_DDR DDRF
|
||||
# define PS2_CLOCK_BIT 0
|
||||
# define PS2_DATA_PORT PORTF
|
||||
# define PS2_DATA_PIN PINF
|
||||
# define PS2_DATA_DDR DDRF
|
||||
# define PS2_DATA_BIT 1
|
||||
#endif
|
||||
|
||||
/* ADB port setting */
|
||||
#define ADB_PORT PORTF
|
||||
#define ADB_PIN PINF
|
||||
#define ADB_DDR DDRF
|
||||
#define ADB_DATA_BIT 0
|
||||
//#define ADB_PSW_BIT 1 // optional
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,135 @@
|
|||
/*
|
||||
* Keymap for ADB keyboard
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "usb_keyboard.h"
|
||||
#include "usb_keycodes.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "keymap_skel.h"
|
||||
|
||||
|
||||
// Convert physical keyboard layout to matrix array.
|
||||
// This is a macro to define keymap easily in keyboard layout form.
|
||||
|
||||
// TODO: ADB to USB default keymap
|
||||
// TODO: keymap macro template for m0116/m0115
|
||||
/* Apple Keyboard m0116
|
||||
K7F, \
|
||||
K35, K12, K13, K14, K15, K17, K16, K1A, K1C, K19, K1D, K1B, K18, K33, K47, K51, K4B, K43, \
|
||||
K30, K0C, K0D, K0E, K0F, K10, K11, K20, K22, K1F, K23, K21, K1E, K59, K5B, K5C, K4E, \
|
||||
K36, K00, K01, K02, K03, K05, K04, K26, K28, K25, K29, K27, K24, K56, K57, K58, K45, \
|
||||
K38, K06, K07, K08, K09, K0B, K2D, K2E, K2B, K2F, K2C, K7B, K53, K54, K55, \
|
||||
K39, K3A, K37, K32, K31, K2A, K3B, K3C, K3D, K3E, K52, K41, K4C \
|
||||
*/
|
||||
|
||||
/* no tenkey
|
||||
K7F, \
|
||||
K35, K12, K13, K14, K15, K17, K16, K1A, K1C, K19, K1D, K1B, K18, K33, \
|
||||
K30, K0C, K0D, K0E, K0F, K10, K11, K20, K22, K1F, K23, K21, K1E, \
|
||||
K36, K00, K01, K02, K03, K05, K04, K26, K28, K25, K29, K27, K24, \
|
||||
K38, K06, K07, K08, K09, K0B, K2D, K2E, K2B, K2F, K2C, K7B, \
|
||||
K39, K3A, K37, K32, K31, K2A, K3B, K3C, K3D, K3E \
|
||||
*/
|
||||
#define KEYMAP( \
|
||||
K7F, \
|
||||
K35, K12, K13, K14, K15, K17, K16, K1A, K1C, K19, K1D, K1B, K18, K33, \
|
||||
K30, K0C, K0D, K0E, K0F, K10, K11, K20, K22, K1F, K23, K21, K1E, \
|
||||
K36, K00, K01, K02, K03, K05, K04, K26, K28, K25, K29, K27, K24, \
|
||||
K38, K06, K07, K08, K09, K0B, K2D, K2E, K2B, K2F, K2C, K7B, \
|
||||
K39, K3A, K37, K32, K31, K2A, K3B, K3C, K3D, K3E \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K08, K09, 000, K0B, K0C, K0D, K0E, K0F }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17 }, \
|
||||
{ K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27 }, \
|
||||
{ K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
|
||||
{ K30, K31, K32, K33, 000, K35, K36, K37 }, \
|
||||
{ K38, K39, K3A, K3B, K3C, K3D, K3E, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, 000, 000, 000, 000, 000 }, \
|
||||
{ 000, 000, 000, K7B, 000, 000, 000, K7F }, \
|
||||
}
|
||||
|
||||
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
|
||||
|
||||
|
||||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
|
||||
static const uint8_t PROGMEM fn_layer[] = {
|
||||
0, // FN_0
|
||||
0, // FN_1
|
||||
0, // FN_2
|
||||
0, // FN_3
|
||||
0, // FN_4
|
||||
0, // FN_5
|
||||
0, // FN_6
|
||||
0 // FN_7
|
||||
};
|
||||
|
||||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
|
||||
// See layer.c for details.
|
||||
static const uint8_t PROGMEM fn_keycode[] = {
|
||||
KB_NO, // FN_0
|
||||
KB_NO, // FN_1
|
||||
KB_NO, // FN_2
|
||||
KB_NO, // FN_3
|
||||
KB_NO, // FN_4
|
||||
KB_NO, // FN_5
|
||||
KB_NO, // FN_6
|
||||
KB_NO // FN_7
|
||||
};
|
||||
|
||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
* ,---------------------------------------------------------.
|
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs|
|
||||
* |---------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |
|
||||
* |-----------------------------------------------------' |
|
||||
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return|
|
||||
* |---------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
|
||||
* |---------------------------------------------------------|
|
||||
* |Shi|Alt|Gui l `| | \|Lef|Rig|Dow|Up |
|
||||
* `---------------------------------------------------------'
|
||||
*/
|
||||
KEYMAP(KB_PWR, \
|
||||
KB_ESC, KB_1, KB_2, KB_3, KB_4, KB_5, KB_6, KB_7, KB_8, KB_9, KB_0, KB_MINS,KB_EQL, KB_BSPC, \
|
||||
KB_TAB, KB_Q, KB_W, KB_E, KB_R, KB_T, KB_Y, KB_U, KB_I, KB_O, KB_P, KB_LBRC,KB_RBRC, \
|
||||
KB_LCTL,KB_A, KB_S, KB_D, KB_F, KB_G, KB_H, KB_J, KB_K, KB_L, KB_SCLN,KB_QUOT,KB_ENT, \
|
||||
KB_LSFT,KB_Z, KB_X, KB_C, KB_V, KB_B, KB_N, KB_M, KB_COMM,KB_DOT, KB_SLSH,KB_RSFT, \
|
||||
KB_LSFT,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP),
|
||||
|
||||
};
|
||||
|
||||
|
||||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
|
||||
{
|
||||
return KEYCODE(layer, row, col);
|
||||
}
|
||||
|
||||
uint8_t keymap_fn_layer(uint8_t fn_bits)
|
||||
{
|
||||
return pgm_read_byte(&fn_layer[biton(fn_bits)]);
|
||||
}
|
||||
|
||||
uint8_t keymap_fn_keycode(uint8_t fn_bits)
|
||||
{
|
||||
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
|
||||
}
|
||||
|
||||
// define a condition to enter special function mode
|
||||
bool keymap_is_special_mode(uint8_t fn_bits)
|
||||
{
|
||||
//return (usb_keyboard_mods == (BIT_LCTRL | BIT_LSHIFT | BIT_LALT | BIT_LGUI));
|
||||
return (usb_keyboard_mods == (BIT_RSHIFT));
|
||||
}
|
||||
|
|
@ -0,0 +1,194 @@
|
|||
/*
|
||||
* scan matrix
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "print.h"
|
||||
#include "util.h"
|
||||
#include "debug.h"
|
||||
#include "adb.h"
|
||||
#include "matrix_skel.h"
|
||||
|
||||
|
||||
#if (MATRIX_COLS > 16)
|
||||
# error "MATRIX_COLS must not exceed 16"
|
||||
#endif
|
||||
#if (MATRIX_ROWS > 255)
|
||||
# error "MATRIX_ROWS must not exceed 255"
|
||||
#endif
|
||||
|
||||
|
||||
static bool _matrix_is_modified = false;
|
||||
|
||||
// matrix state buffer(1:on, 0:off)
|
||||
#if (MATRIX_COLS <= 8)
|
||||
static uint8_t *matrix;
|
||||
static uint8_t _matrix0[MATRIX_ROWS];
|
||||
#else
|
||||
static uint16_t *matrix;
|
||||
static uint16_t _matrix0[MATRIX_ROWS];
|
||||
#endif
|
||||
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
static bool matrix_has_ghost_in_row(uint8_t row);
|
||||
#endif
|
||||
static void _register_key(uint8_t key);
|
||||
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
adb_host_init();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
|
||||
matrix = _matrix0;
|
||||
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
debug_matrix = true;
|
||||
debug_keyboard = true;
|
||||
debug_mouse = true;
|
||||
print("debug enabled.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
uint16_t codes;
|
||||
uint8_t key0, key1;
|
||||
|
||||
_matrix_is_modified = false;
|
||||
|
||||
codes = adb_host_kbd_recv();
|
||||
key0 = codes>>8;
|
||||
key1 = codes&0xFF;
|
||||
if (debug_matrix) {
|
||||
//print("adb_host_kbd_recv: "); phex16(codes); print("\n");
|
||||
}
|
||||
|
||||
if (codes == 0) { // no keys
|
||||
return 0;
|
||||
} else if (key0 == 0xFF && key1 != 0xFF) { // error
|
||||
return codes&0xFF;
|
||||
} else {
|
||||
_matrix_is_modified = true;
|
||||
_register_key(key0);
|
||||
if (key1 != 0xFF) // key1 is 0xFF when no second key.
|
||||
_register_key(key1);
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
return _matrix_is_modified;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_has_ghost(void)
|
||||
{
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
if (matrix_has_ghost_in_row(i))
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & (1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
#if (MATRIX_COLS <= 8)
|
||||
uint8_t matrix_get_row(uint8_t row)
|
||||
#else
|
||||
uint16_t matrix_get_row(uint8_t row)
|
||||
#endif
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
#if (MATRIX_COLS <= 8)
|
||||
print("\nr/c 01234567\n");
|
||||
#else
|
||||
print("\nr/c 0123456789ABCDEF\n");
|
||||
#endif
|
||||
for (uint8_t row = 0; row < matrix_rows(); row++) {
|
||||
phex(row); print(": ");
|
||||
#if (MATRIX_COLS <= 8)
|
||||
pbin_reverse(matrix_get_row(row));
|
||||
#else
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
#endif
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
if (matrix_has_ghost_in_row(row)) {
|
||||
print(" <ghost");
|
||||
}
|
||||
#endif
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
#if (MATRIX_COLS <= 8)
|
||||
count += bitpop(matrix[i]);
|
||||
#else
|
||||
count += bitpop16(matrix[i]);
|
||||
#endif
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
inline
|
||||
static bool matrix_has_ghost_in_row(uint8_t row)
|
||||
{
|
||||
// no ghost exists in case less than 2 keys on
|
||||
if (((matrix[row] - 1) & matrix[row]) == 0)
|
||||
return false;
|
||||
|
||||
// ghost exists in case same state as other row
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
if (i != row && (matrix[i] & matrix[row]) == matrix[row])
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
inline
|
||||
static void _register_key(uint8_t key)
|
||||
{
|
||||
uint8_t col, row;
|
||||
col = key&0x07;
|
||||
row = (key>>3)&0x0F;
|
||||
if (key&0x80) {
|
||||
matrix[row] &= ~(1<<col);
|
||||
} else {
|
||||
matrix[row] |= (1<<col);
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue