diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile
index 4e2a6f00f..6ce6e4373 100644
--- a/keyboards/lets_split/Makefile
+++ b/keyboards/lets_split/Makefile
@@ -1,3 +1,82 @@
+<<<<<<< HEAD
 ifndef MAKEFILE_INCLUDED
+=======
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= yes           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+USE_I2C ?= yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+SUBPROJECT_DEFAULT = rev2
+ifndef QUANTUM_DIR
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h
index 5bee55319..91b11f03f 100644
--- a/keyboards/lets_split/config.h
+++ b/keyboards/lets_split/config.h
@@ -61,6 +61,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
+<<<<<<< HEAD
+=======
+<<<<<<< HEAD
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 #ifdef SUBPROJECT_rev1
     #include "rev1/config.h"
 #endif
@@ -68,3 +72,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #include "rev2/config.h"
 #endif
 #endif
+<<<<<<< HEAD
+=======
+
+
+
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c
index fc41c01fd..41b9b8d8f 100644
--- a/keyboards/lets_split/keymaps/default/keymap.c
+++ b/keyboards/lets_split/keymaps/default/keymap.c
@@ -29,6 +29,7 @@ enum custom_keycodes {
 #define XXXXXXX KC_NO
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+<<<<<<< HEAD
 
 /* Qwerty
  * ,-----------------------------------------------------------------------------------.
@@ -82,41 +83,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
   KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
   ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+=======
+[0] = KEYMAP( \
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER),   KC_SPC,  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 ),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+[3] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+<<<<<<< HEAD
   _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+=======
+  _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 ),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+[4] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, \
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+<<<<<<< HEAD
   _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
 ),
 
@@ -139,6 +128,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 )
 
 
+=======
+  _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 };
 
 #ifdef AUDIO_ENABLE
diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c
index 851299aa2..8bb33f951 100644
--- a/keyboards/lets_split/lets_split.c
+++ b/keyboards/lets_split/lets_split.c
@@ -1,2 +1,6 @@
 #include "lets_split.h"
 
+<<<<<<< HEAD
+=======
+
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index f4d900acc..da5b47673 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -25,7 +25,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x3060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Wootpatoot
+<<<<<<< HEAD
 #define PRODUCT         Lets Split
+=======
+#define PRODUCT         Lets Split v1
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 #define DESCRIPTION     A split keyboard for the cheap makers
 
 /* key matrix size */
@@ -41,11 +45,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define USE_I2C
 
+<<<<<<< HEAD
 // Use serial if not using I2C
 #ifndef USE_I2C
 #  define USE_SERIAL
 #endif
 
+=======
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 // #define EE_HANDS
 
 #define I2C_MASTER_LEFT
@@ -74,9 +81,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
+<<<<<<< HEAD
 #define RGB_DI_PIN D4
 #define RGBLIGHT_TIMER
 #define RGBLED_NUM 8     // Number of LEDs
+=======
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+#define ws2812_pin PD1
+#define RGBLED_NUM 28     // Number of LEDs
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
@@ -99,4 +113,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+<<<<<<< HEAD
 #endif
+=======
+#endif
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
diff --git a/keyboards/lets_split/rev1/rev1.c b/keyboards/lets_split/rev1/rev1.c
index c505d3a6e..41dd1e353 100644
--- a/keyboards/lets_split/rev1/rev1.c
+++ b/keyboards/lets_split/rev1/rev1.c
@@ -24,9 +24,15 @@ void matrix_init_kb(void) {
 };
 
 void shutdown_user(void) {
+<<<<<<< HEAD
     #ifdef AUDIO_ENABLE
         PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
 	_delay_ms(150);
 	stop_all_notes();
     #endif
+=======
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 }
diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h
index 50bda0315..998b2be7c 100644
--- a/keyboards/lets_split/rev1/rev1.h
+++ b/keyboards/lets_split/rev1/rev1.h
@@ -1,9 +1,15 @@
 #ifndef REV1_H
 #define REV1_H
 
+<<<<<<< HEAD
 #include "../lets_split.h"
 
 //void promicro_bootloader_jmp(bool program);
+=======
+#include "quantum.h"
+
+void promicro_bootloader_jmp(bool program);
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 
 #define KEYMAP( \
 	k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index cd152e331..19c137e56 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -41,11 +41,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define USE_I2C
 
+<<<<<<< HEAD
 // Use serial if not using I2C
 #ifndef USE_I2C
 #  define USE_SERIAL
 #endif
 
+=======
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 // #define EE_HANDS
 
 #define I2C_MASTER_LEFT
@@ -74,9 +77,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
+<<<<<<< HEAD
 #define RGB_DI_PIN D3
 #define RGBLIGHT_TIMER
 #define RGBLED_NUM 12    // Number of LEDs
+=======
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+#define ws2812_pin PD1
+#define RGBLED_NUM 28     // Number of LEDs
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
@@ -99,4 +109,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+<<<<<<< HEAD
 #endif
+=======
+#endif
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c
index c505d3a6e..41dd1e353 100644
--- a/keyboards/lets_split/rev2/rev2.c
+++ b/keyboards/lets_split/rev2/rev2.c
@@ -24,9 +24,15 @@ void matrix_init_kb(void) {
 };
 
 void shutdown_user(void) {
+<<<<<<< HEAD
     #ifdef AUDIO_ENABLE
         PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
 	_delay_ms(150);
 	stop_all_notes();
     #endif
+=======
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 }
diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h
index a8b0f0f4c..9e251ca57 100644
--- a/keyboards/lets_split/rev2/rev2.h
+++ b/keyboards/lets_split/rev2/rev2.h
@@ -1,9 +1,15 @@
 #ifndef REV2_H
 #define REV2_H
 
+<<<<<<< HEAD
 #include "../lets_split.h"
 
 //void promicro_bootloader_jmp(bool program);
+=======
+#include "quantum.h"
+
+void promicro_bootloader_jmp(bool program);
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 
 #define KEYMAP( \
 	k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile
index 4e2a6f00f..c65665142 100644
--- a/keyboards/maxipad/Makefile
+++ b/keyboards/maxipad/Makefile
@@ -1,3 +1,81 @@
+<<<<<<< HEAD
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
\ No newline at end of file
+endif
+=======
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h
index 2462a5cfd..4a942aae9 100644
--- a/keyboards/maxipad/config.h
+++ b/keyboards/maxipad/config.h
@@ -24,9 +24,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
+<<<<<<< HEAD
 #define MANUFACTURER    You
 #define PRODUCT         maxipad
 #define DESCRIPTION     A custom keyboard
+=======
+#define MANUFACTURER    Wootpatoot
+#define PRODUCT         maxipad
+#define DESCRIPTION     g8ming keeb
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 
 /* key matrix size */
 #define MATRIX_ROWS 5
diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c
index 8a9bc4f0d..5e3a594cc 100644
--- a/keyboards/maxipad/keymaps/default/keymap.c
+++ b/keyboards/maxipad/keymaps/default/keymap.c
@@ -10,8 +10,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 [1] = KEYMAP(
   KC_GRV,  KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \
+<<<<<<< HEAD
   KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
+=======
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  \
 ),
diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md
index e722b6602..1971ce1f3 100644
--- a/keyboards/maxipad/readme.md
+++ b/keyboards/maxipad/readme.md
@@ -3,7 +3,11 @@ maxipad keyboard firmware
 
 ## Quantum MK Firmware
 
+<<<<<<< HEAD
 For the full Quantum feature list, see [the parent readme](/).
+=======
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 
 ## Building
 
@@ -13,12 +17,17 @@ Depending on which keymap you would like to use, you will have to compile slight
 
 ### Default
 
+<<<<<<< HEAD
 To build with the default keymap, simply run `make default`.
+=======
+To build with the default keymap, simply run `make`.
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 
 ### Other Keymaps
 
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
 
+<<<<<<< HEAD
 To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
 ```
@@ -26,3 +35,12 @@ $ make [default|jack|<name>]
 ```
 
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
+=======
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
+>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df