diff --git a/keyboards/halberd/config.h b/keyboards/halberd/config.h new file mode 100644 index 000000000..ab46c4d8a --- /dev/null +++ b/keyboards/halberd/config.h @@ -0,0 +1,232 @@ +/* Copyright 2019 ENDO Katsuhiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Kagizaraya +#define PRODUCT Halberd +#define DESCRIPTION 40% keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D6, D4, D5, E6 } +#define MATRIX_COL_PINS { D7, B4, C7, C6, B6, B5, F7, F6, F5, F4, F1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN F0 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 40 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) +*/ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define TAPPING_TERM 100 + + diff --git a/keyboards/halberd/halberd.c b/keyboards/halberd/halberd.c new file mode 100644 index 000000000..8b59310a7 --- /dev/null +++ b/keyboards/halberd/halberd.c @@ -0,0 +1,43 @@ +/* Copyright 2019 ENDO Katsuhiro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "halberd.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/halberd/halberd.h b/keyboards/halberd/halberd.h new file mode 100644 index 000000000..d2adb4a15 --- /dev/null +++ b/keyboards/halberd/halberd.h @@ -0,0 +1,40 @@ +/* Copyright 2019 ENDO Katsuhiro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, \ + K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, K32, \ + K33, K34, K35, K36, K37, K38, K39 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10 }, \ + { K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21 }, \ + { K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, K32 }, \ + { KC_NO, KC_NO, K33, K34, K35, K36, K37, K38, K39, KC_NO, KC_NO } \ +} + diff --git a/keyboards/halberd/info.json b/keyboards/halberd/info.json new file mode 100644 index 000000000..5e2a57f21 --- /dev/null +++ b/keyboards/halberd/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "Halberd", + "url": "", + "maintainer": "ka2hiro", + "width": 11, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"label":"!", "x":0, "y":0}, {"label":"@", "x":1, "y":0}, {"label":"#", "x":2, "y":0}, {"label":"$", "x":3, "y":0}, {"label":"%", "x":4, "y":0}, {"label":"Tab", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"Tab", "x":0, "y":1}, {"label":"_", "x":1, "y":1}, {"label":"+", "x":2, "y":1}, {"label":"|", "x":3, "y":1}, {"label":"~", "x":4, "y":1}, {"label":"BkSp", "x":5, "y":1}, {"label":":", "x":6, "y":1}, {"label":"\"", "x":7, "y":1}, {"label":">", "x":8, "y":1}, {"label":"{", "x":9, "y":1}, {"label":"}", "x":10, "y":1}, {"label":"Caps", "x":0, "y":2}, {"label":"-", "x":1, "y":2}, {"label":"=", "x":2, "y":2}, {"label":"\\", "x":3, "y":2}, {"label":"`", "x":4, "y":2}, {"label":"Enter", "x":5, "y":2}, {"label":";", "x":6, "y":2}, {"label":"'", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":"[", "x":9, "y":2}, {"label":"]", "x":10, "y":2}, {"label":"GUI", "x":2, "y":3}, {"label":"Lower", "x":3, "y":3}, {"label":"Esc", "x":4, "y":3}, {"x":5, "y":3}, {"label":"Shift", "x":6, "y":3}, {"label":"Raise", "x":7, "y":3}, {"label":"Alt", "x":8, "y":3}] + } + } +} + diff --git a/keyboards/halberd/keymaps/default/config.h b/keyboards/halberd/keymaps/default/config.h new file mode 100644 index 000000000..cea12f905 --- /dev/null +++ b/keyboards/halberd/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 ENDO Katsuhiro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/halberd/keymaps/default/keymap.c b/keyboards/halberd/keymaps/default/keymap.c new file mode 100644 index 000000000..c79a81def --- /dev/null +++ b/keyboards/halberd/keymaps/default/keymap.c @@ -0,0 +1,160 @@ +/* Copyright 2019 ENDO Katsuhiro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * + * ,----------------------------------------------------------------------------. + * | Q | W | E | R | T | Tab | Y | U | I | O | P | + * |------+------+------+------+------|------|------+------+------+------+------| + * | A | S | D | F | G | BkSp | H | J | K | L | ; | + * |------+------+------+------+------|------|------+------+------+------+------| + * | Z | X | C | V | B | Enter| N | M | , | . | / | + * `-------------+------+------+------|------|------+------+------+------+------' + * | GUI | LOWER|Ctrl/Esc|Space|Shift| RAISE| Alt | + * `------------------------------------------------' + */ +[_QWERTY] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_BSPC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LGUI, LOWER, MT(MOD_LCTL, KC_ESC), KC_SPC, KC_LSFT, RAISE, KC_LALT +), + +/* Raise + * + * ,----------------------------------------------------------------------------. + * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + * |------+------+------+------+------|------|------+------+------+------+------| + * | Tab | _ | + | | | ~ | | : | " | > | { | } | + * |------+------+------+------+------|------|------+------+------+------+------| + * | Caps| - | = | \ | ` | | ; | ' | < | [ | ] | + * `-------------+------+------+------|------|------+------+------+------+------' + * | | LOWER| | | Esc | RAISE| | + * `------------------------------------------------' + */ +[_RAISE] = LAYOUT( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, + KC_TAB, KC_UNDS, KC_PLUS, KC_PIPE, KC_TILD, _______, KC_COLN, KC_DQUO, KC_GT, KC_LCBR, KC_RCBR, + KC_CAPS, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, _______, KC_SCLN, KC_QUOT, KC_LT, KC_LBRC, KC_RBRC, + _______, _______, _______, _______, _______, _______, _______ +), + +/* Lower + * + * ,----------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + * |------+------+------+------+------|------|------+------+------+------+------| + * | Tab | | | |Enter | | Left | Down | Up | Right| Enter| + * |------+------+------+------+------|------|------+------+------+------+------| + * | Ctrl| | GUI | Alt | Del | | BkSp | PgUp | PgDn | | | + * `-------------+------+------+------|------|------+------+------+------+------' + * | | LOWER| | | | RAISE| | + * `------------------------------------------------' + */ +[_LOWER] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TAB, _______, _______, _______, KC_ENT, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_ENT, + KC_LCTL, _______, KC_LGUI, KC_LALT, KC_DEL, _______, KC_BSPC, KC_PGUP, KC_PGDN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ +), + + +/* Adjust (Lower + Raise) + * + * ,----------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | + * |------+------+------+------+------|------|------+------+------+------+------| + * | F11 | F12 | |RGBSAI|RGBSAD| |RGBVAI|RGBVAD| | | | + * |------+------+------+------+------|------|------+------+------+------+------| + * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD| | Prev | Next | Vol- | Vol+ | Play | + * `-------------+------+------+------|------|------+------+------+------+------' + * | | LOWER| | | | RAISE| | + * `------------------------------------------------' + */ +[_ADJUST] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_F11, KC_F12, RGB_RMOD, RGB_SAI, RGB_SAD, _______, RGB_VAI, RGB_VAD, _______, _______, _______, + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, _______, KC_MPRV, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______ +) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + // persistant_default_layer_set(1UL<<_QWERTY); + set_single_persistent_default_layer(_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/halberd/keymaps/default/readme.md b/keyboards/halberd/keymaps/default/readme.md new file mode 100644 index 000000000..567b45c47 --- /dev/null +++ b/keyboards/halberd/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for halberd diff --git a/keyboards/halberd/keymaps/right_modifiers/config.h b/keyboards/halberd/keymaps/right_modifiers/config.h new file mode 100644 index 000000000..cea12f905 --- /dev/null +++ b/keyboards/halberd/keymaps/right_modifiers/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 ENDO Katsuhiro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/halberd/keymaps/right_modifiers/keymap.c b/keyboards/halberd/keymaps/right_modifiers/keymap.c new file mode 100644 index 000000000..f74eef454 --- /dev/null +++ b/keyboards/halberd/keymaps/right_modifiers/keymap.c @@ -0,0 +1,160 @@ +/* Copyright 2019 ENDO Katsuhiro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * + * ,----------------------------------------------------------------------------. + * | Q | W | E | R | T | Y | U | I | O | P | BkSp | + * |------+------+------+------+------|------+------+------+------+------|------| + * | A | S | D | F | G | H | J | K | L | ; | Enter| + * |------+------+------+------+------|------+------+------+------+------|------| + * | Z | X | C | V | B | N | M | , | . | / | Shift| + * `-------------+------+------+------|------+------+------+------+------+------' + * | GUI | LOWER|Ctrl/Esc|Space| RAISE| Alt | Tab | + * `------------------------------------------------' + */ +[_QWERTY] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, + KC_LGUI, LOWER, MT(MOD_LCTL, KC_ESC), KC_SPC, RAISE, KC_LALT, KC_TAB +), + +/* Raise + * + * ,----------------------------------------------------------------------------. + * | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------+------+------+------+------|------+------+------+------+------|------| + * | Tab | _ | + | | | ~ | : | " | > | { | } | | + * |------+------+------+------+------|------+------+------+------+------|------| + * | Caps| - | = | \ | ` | ; | ' | < | [ | ] | | + * `-------------+------+------+------|------+------+------+------+------+------' + * | | | | | | | | + * `------------------------------------------------' + */ +[_RAISE] = LAYOUT( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + KC_TAB, KC_UNDS, KC_PLUS, KC_PIPE, KC_TILD, KC_COLN, KC_DQUO, KC_GT, KC_LCBR, KC_RCBR, _______, + KC_CAPS, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_SCLN, KC_QUOT, KC_LT, KC_LBRC, KC_RBRC, _______, + _______, _______, _______, _______, _______, _______, _______ +), + +/* Lower + * + * ,----------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------|------+------+------+------+------|------| + * | Tab | | | |Enter | Left | Down | Up | Right| Enter| | + * |------+------+------+------+------|------+------+------+------+------|------| + * | Ctrl| | GUI | Alt | Del | BkSp | PgUp | PgDn | | | | + * `-------------+------+------+------|------+------+------+------+------+------' + * | | | | | | | | + * `------------------------------------------------' + */ +[_LOWER] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + KC_TAB, _______, _______, _______, KC_ENT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_ENT, _______, + KC_LCTL, _______, KC_LGUI, KC_LALT, KC_DEL, KC_BSPC, KC_PGUP, KC_PGDN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ +), + + +/* Adjust (Lower + Raise) + * + * ,----------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | + * |------+------+------+------+------|------+------+------+------+------|------| + * | F11 | F12 | |RGBSAI|RGBSAD|RGBVAI|RGBVAD| | | | | + * |------+------+------+------+------|------+------+------+------+------|------| + * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD| Prev | Next | Vol- | Vol+ | Play | | + * `-------------+------+------+------|------+------+------+------+------+------' + * | | | | | | | | + * `------------------------------------------------' + */ +[_ADJUST] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, + KC_F11, KC_F12, RGB_RMOD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_MPRV, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, + _______, _______, _______, _______, _______, _______, _______ +) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + // persistant_default_layer_set(1UL<<_QWERTY); + set_single_persistent_default_layer(_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/halberd/keymaps/right_modifiers/readme.md b/keyboards/halberd/keymaps/right_modifiers/readme.md new file mode 100644 index 000000000..2479922bd --- /dev/null +++ b/keyboards/halberd/keymaps/right_modifiers/readme.md @@ -0,0 +1,2 @@ +# Modifiers on the right side. + diff --git a/keyboards/halberd/readme.md b/keyboards/halberd/readme.md new file mode 100644 index 000000000..7fa0388fd --- /dev/null +++ b/keyboards/halberd/readme.md @@ -0,0 +1,15 @@ +# Halberd + +![Halberd](https://i.imgur.com/QabQNPQ.jpg) + +40% keyboard. + +Keyboard Maintainer: [ka2hiro](https://github.com/ka2hiro) [@ka2hiro](https://twitter.com/ka2hiro) +Hardware Supported: Halberd PCB, ATMEGA32U4 +Hardware Availability: [@kagizaraya](https://twitter.com/kagizaraya) + +Make example for this keyboard (after setting up your build environment): + + make halberd:default:dfu + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk new file mode 100644 index 000000000..ed4e6bde3 --- /dev/null +++ b/keyboards/halberd/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)