led_matrix works now

This commit is contained in:
skullY 2019-01-26 21:25:59 -08:00 committed by skullydazed
parent bf2670601d
commit 6b74dd6de5
7 changed files with 45 additions and 39 deletions

View File

@ -212,6 +212,9 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
endif
ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
endif
endif
ifeq ($(strip $(CIE1931_CURVE)), yes)

View File

@ -46,13 +46,13 @@ __attribute__ ((weak))
void i2c_init(void)
{
// Try releasing special pins for a short time
palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
chThdSleepMilliseconds(10);
palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
//i2cInit(); //This is invoked by halInit() so no need to redo it.
}
@ -67,6 +67,7 @@ uint8_t i2c_start(uint8_t address)
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
{
// FIXME: Next steps: Add a print here, copy this file to your rgb_matrix firmware. Compare both.
i2c_address = address;
i2cStart(&I2C_DRIVER, &i2cconfig);
return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));

View File

@ -26,6 +26,16 @@
#include "ch.h"
#include <hal.h>
#ifndef I2C1_BANK
#define I2C1_BANK GPIOB
#endif
#ifndef I2C1_SCL
#define I2C1_SCL 6
#endif
#ifndef I2C1_SDA
#define I2C1_SDA 7
#endif
#ifndef I2C_DRIVER
#define I2C_DRIVER I2CD1
#endif

View File

@ -158,12 +158,7 @@ void IS31FL3731_init(uint8_t addr) {
// enable software shutdown
IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
// this delay was copied from other drivers, might not be needed
// FIXME: Don't we have a wrapper for this already?
#ifdef __AVR__
_delay_ms(10);
#else
wait_ms(10);
#endif
// picture mode
IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);

View File

@ -55,6 +55,9 @@ led_config_t led_matrix_config;
bool g_suspend_state = false;
// Last uniform brightness level.
uint8_t g_uniform_brightness = 0;
// Global tick at 20 Hz
uint32_t g_tick = 0;
@ -118,6 +121,7 @@ void led_matrix_set_index_value_all(uint8_t value) {
}
bool process_led_matrix(uint16_t keycode, keyrecord_t *record) {
/* FIXME: Why you comment out skully?
if (record->event.pressed) {
uint8_t led[8], led_count;
map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count);
@ -141,6 +145,7 @@ bool process_led_matrix(uint16_t keycode, keyrecord_t *record) {
g_any_key_hit = 255;
#endif
}
*/
return true;
}
@ -155,21 +160,19 @@ void led_matrix_all_off(void) {
// Uniform brightness
void led_matrix_uniform_brightness(void) {
led_matrix_set_index_value_all(led_matrix_config.val);
uint8_t current_brightness = (LED_MATRIX_MAXIMUM_BRIGHTNESS / BACKLIGHT_LEVELS) * led_matrix_config.val;
if (current_brightness != g_uniform_brightness) {
g_uniform_brightness = current_brightness;
led_matrix_set_index_value_all(current_brightness);
}
}
void led_matrix_custom(void) {}
void led_matrix_task(void) {
#ifdef TRACK_PREVIOUS_EFFECT
static uint8_t toggle_enable_last = 255;
#endif
if (!led_matrix_config.enable) {
led_matrix_all_off();
led_matrix_indicators();
#ifdef TRACK_PREVIOUS_EFFECT
toggle_enable_last = led_matrix_config.enable;
#endif
return;
}
@ -187,6 +190,7 @@ void led_matrix_task(void) {
g_any_key_hit++;
}
/* FIXME: WHY YOU COMMENT OUT?!
for (int led = 0; led < LED_DRIVER_LED_COUNT; led++) {
if (g_key_hit[led] < 255) {
if (g_key_hit[led] == 254)
@ -200,24 +204,13 @@ void led_matrix_task(void) {
led_matrix_uniform_brightness();
return;
}
*/
// Ideally we would also stop sending zeros to the LED driver PWM buffers
// while suspended and just do a software shutdown. This is a cheap hack for now.
bool suspend_backlight = ((g_suspend_state && LED_DISABLE_WHEN_USB_SUSPENDED) ||
(LED_DISABLE_AFTER_TIMEOUT > 0 && g_any_key_hit > LED_DISABLE_AFTER_TIMEOUT * 60 * 20));
uint8_t effect = suspend_backlight ? 0 : led_matrix_config.mode;
#ifdef TRACK_PREVIOUS_EFFECT
// Keep track of the effect used last time,
// detect change in effect, so each effect can
// have an optional initialization.
static uint8_t effect_last = 255;
bool initialize = (effect != effect_last) || (led_matrix_config.enable != toggle_enable_last);
effect_last = effect;
toggle_enable_last = led_matrix_config.enable;
#endif
// this gets ticked at 20 Hz.
// each effect can opt to do calculations
// and/or request PWM buffer updates.
@ -234,6 +227,8 @@ void led_matrix_task(void) {
led_matrix_indicators();
}
// Tell the LED driver to update its state
led_matrix_driver.flush();
}
void led_matrix_indicators(void) {
@ -404,3 +399,7 @@ void led_matrix_set_value(uint8_t val) {
led_matrix_set_value_noeeprom(val);
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void backlight_set(uint8_t val) {
led_matrix_set_value(val);
}

View File

@ -112,9 +112,6 @@ uint8_t led_matrix_get_mode(void);
void led_matrix_set_value(uint8_t mode);
void led_matrix_set_value_noeeprom(uint8_t mode);
// Hook into the existing backlight API
#define backlight_set(val) led_matrix_set_value(val)
typedef struct {
/* Perform any initialisation required for the other driver functions to work. */
void (*init)(void);

View File

@ -64,7 +64,8 @@ static void init(void) {
IS31FL3733_init(LED_DRIVER_ADDR_4);
#endif
#endif
for (int index = 0; index < LED_DRIVER_COUNT; index++) {
for (int index = 0; index < LED_DRIVER_LED_COUNT; index++) {
#ifdef IS31FL3731
IS31FL3731_set_led_control_register(index, true);
#else