Atreus rules.mk and readme (#5678)

* Update rules and readme to reflect new make usage.

* Minor edit.

* Minor edit.
This commit is contained in:
Jason Koh 2019-04-23 01:15:56 +10:00 committed by MechMerlin
parent 4ecaa25f3e
commit 76e78e8ca1
2 changed files with 60 additions and 50 deletions

View File

@ -1,21 +1,24 @@
Atreus Atreus
=== ======
A small mechanical keyboard that is based around the shape of the human hand. A small mechanical keyboard that is based around the shape of the human hand.
These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, (usually hand-wired) one powered by an A-Star. (usually using a PCB) This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands.
Keyboard Maintainer: [Phil Hagelberg](https://github.com/technomancy) Keyboard Maintainer: [Phil Hagelberg](https://github.com/technomancy)
Hardware Supported: Atreus, PCB-based or hand-wired Hardware Supported: Atreus, PCB-based or hand-wired
Hardware Availability: https://atreus.technomancy.us Hardware Availability: https://atreus.technomancy.us
Make example for this keyboard (after setting up your build environment): These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below.
make atreus:default:avrdude A-Star:\
`make atreus:default:avrdude`
Unlike the TMK firmware, this command should be run from the root of Teensy:\
the repository, not the directory containing this readme. `make TEENSY2=yes atreus:default:teensy`
If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g.
If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands. `make PCBDOWN=yes atreus:default:avrdude`
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. *Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.*
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools), then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

View File

@ -1,19 +1,4 @@
ifdef TEENSY2
OPT_DEFS += -DATREUS_TEENSY2
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
else
OPT_DEFS += -DATREUS_ASTAR
ifdef PCBDOWN
OPT_DEFS += -DPCBDOWN
endif
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
endif
# MCU name # MCU name
#MCU = at90usb1287
MCU = atmega32u4 MCU = atmega32u4
# Processor frequency. # Processor frequency.
@ -48,34 +33,56 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU) F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
ifdef TEENSY2
BOOTLOADER = halfkay
else
BOOTLOADER = caterina
endif
# Interrupt driven control endpoint task(+60) # Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options # Bootloader selection
# comment out to disable the options. # Teensy halfkay
# # Pro Micro caterina
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) # Atmel DFU atmel-dfu
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) # LUFA DFU lufa-dfu
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) # QMK DFU qmk-dfu
CONSOLE_ENABLE = yes # Console for debug(+400) # atmega32a bootloadHID
COMMAND_ENABLE = yes # Commands for debug and configuration ifdef TEENSY2
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE BOOTLOADER = halfkay
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend OPT_DEFS += -DATREUS_TEENSY2
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA else
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BOOTLOADER = caterina
# MIDI_ENABLE = YES # MIDI controls OPT_DEFS += -DATREUS_ASTAR
UNICODE_ENABLE = YES # Unicode ifdef PCBDOWN
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID OPT_DEFS += -DPCBDOWN
endif
endif
USB = /dev/cu.usbmodem1411
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = yes # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)