[Keyboard] Adds support for BM16S keyboard (#5659)
* Added support for BM16S keyboard. * Update keyboards/bm16s/bm16s.h Co-Authored-By: bontakun <ben@bontakun.net> * Update keyboards/bm16s/bm16s.h Co-Authored-By: bontakun <ben@bontakun.net> * Cleaned up a bunch of unneeded stuff. * Made layout name match. * Changed rules file to have correct bootloader and indention. Updated readme to reflect availability on krepublic. Updated keymap to have more obvious RGB controls. * Removed unnecessary file. * Fixed grammar in readme. Co-Authored-By: bontakun <ben@bontakun.net> * Migrated to autogenerated layout config, without issue. * Renamed LAYOUT to match community standards.
This commit is contained in:
Benjamin
Drashna Jaelre
parent
d67b99ff3c
commit
8725197ad6
|
|
@ -0,0 +1,15 @@
|
|||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_ortho_4x4( \
|
||||
K00, K01, K02, K03, \
|
||||
K10, K11, K12, K13, \
|
||||
K20, K21, K22, K23, \
|
||||
K30, K31, K32, K33 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03 }, \
|
||||
{ K10, K11, K12, K13 }, \
|
||||
{ K20, K21, K22, K23 }, \
|
||||
{ K30, K31, K32, K33 } \
|
||||
}
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
#pragma once
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER KPrepublic
|
||||
#define PRODUCT bm16s
|
||||
#define DESCRIPTION KPrepublic bm16s
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D1, D0, D3, D2 }
|
||||
#define MATRIX_COL_PINS { F7, F6, D4, D6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 16
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"keyboard_name": "bm16s",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 4,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT_ortho_4x4": {
|
||||
"key_count": 16,
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":0, "y":1},
|
||||
{"x":1, "y":1},
|
||||
{"x":2, "y":1},
|
||||
{"x":3, "y":1},
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3, "y":2},
|
||||
{"x":0, "y":3},
|
||||
{"x":1, "y":3},
|
||||
{"x":2, "y":3},
|
||||
{"x":3, "y":3}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_4x4(
|
||||
KC_KP_7, KC_KP_8, KC_KP_9, MO(1), \
|
||||
KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, \
|
||||
KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, \
|
||||
KC_KP_0, KC_PDOT, KC_PCMM, KC_PENT \
|
||||
),
|
||||
[1] = LAYOUT_ortho_4x4(
|
||||
RESET, BL_STEP, _______, KC_VOLU, \
|
||||
BL_TOGG, BL_DEC, BL_INC, KC_VOLD, \
|
||||
RGB_TOG, RGB_MOD, RGB_HUI, KC_MUTE, \
|
||||
RGB_SAI, RGB_SAD, RGB_HUD, _______ \
|
||||
),
|
||||
};
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define RGB_BRU RGB_VAI
|
||||
#define RGB_BRD RGB_VAD
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_ortho_4x4(
|
||||
KC_BRIU, _______, _______, KC_VOLU, \
|
||||
KC_BRID, _______, _______, KC_VOLD, \
|
||||
_______, _______, _______, KC_MUTE, \
|
||||
KC_MPRV, KC_MPLY, KC_MNXT, MO(1) \
|
||||
),
|
||||
[1] = LAYOUT_ortho_4x4(
|
||||
RESET, _______, _______, _______, \
|
||||
RGB_SPD, RGB_BRU, RGB_SPI, _______, \
|
||||
RGB_RMOD, RGB_BRD, RGB_MOD, _______, \
|
||||
RGB_TOG, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
# bm16s
|
||||
|
||||
A 16-key macropad, with USB C and per-key RGB backlighting. This is a variant of the BM16A, but with low profile Choc switches.
|
||||
|
||||
Keyboard Maintainer: QMK Community
|
||||
Hardware Supported: The PCBs, controllers supported
|
||||
Hardware Availability: [KPrepublic](https://kprepublic.com/collections/pcb/products/bm16s-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch-leds-choc-switch); [AliExpress](https://www.aliexpress.com/item/bm16s-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch/32999247908.html); [Massdrop](https://www.massdrop.com/buy/78169)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make bm16s:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
@ -0,0 +1,72 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# atmega32a bootloadHID
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
|
||||
# If you don't know the bootloader type, then you can specify the
|
||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
LAYOUTS = ortho_4x4
|
||||
Loading…
Reference in New Issue