diff --git a/keyboards/xd60/Makefile b/keyboards/xd60/Makefile new file mode 100644 index 000000000..57b2ef62e --- /dev/null +++ b/keyboards/xd60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/xd60/arrow-cluster.JPG b/keyboards/xd60/arrow-cluster.JPG new file mode 100644 index 000000000..aa03dc08e Binary files /dev/null and b/keyboards/xd60/arrow-cluster.JPG differ diff --git a/keyboards/xd60/config.h b/keyboards/xd60/config.h new file mode 100644 index 000000000..13ae29063 --- /dev/null +++ b/keyboards/xd60/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER XIUDI +#define PRODUCT XD60 +#define DESCRIPTION XD60 Keyboard by XIUDI + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboards/xd60/keymaps/default/keymap.c b/keyboards/xd60/keymaps/default/keymap.c new file mode 100644 index 000000000..ea85c02a3 --- /dev/null +++ b/keyboards/xd60/keymaps/default/keymap.c @@ -0,0 +1,64 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_NO, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_HOME, KC_PGDOWN,KC_END), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + // Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + xd60_esc_led_on(); + } else { + xd60_esc_led_off(); + } + + /* + if (layer & (1<<2)) { + xd60_poker_leds_on(); + xd60_esc_led_on(); + } else { + xd60_poker_leds_off(); + xd60_esc_led_off(); + } + */ +}; diff --git a/keyboards/xd60/keymaps/default/readme.md b/keyboards/xd60/keymaps/default/readme.md new file mode 100644 index 000000000..d2a87bd72 --- /dev/null +++ b/keyboards/xd60/keymaps/default/readme.md @@ -0,0 +1,9 @@ +# Default Keymap for XIUDI's 60% XD60 PCB + +![Default Keymap for XD60](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png) + +## Additional Notes +Default Keymap for XD60 as indicated on the original sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/keymaps/stanleylai/keymap.c b/keyboards/xd60/keymaps/stanleylai/keymap.c new file mode 100644 index 000000000..a84ee0f89 --- /dev/null +++ b/keyboards/xd60/keymaps/stanleylai/keymap.c @@ -0,0 +1,60 @@ +#include "xd60.h" +#include "action_layer.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // 0: Base Layer + KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + + // 1: Function Layer + KEYMAP( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ + KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP, BL_TOGG, KC_DEL, \ + F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_PGUP, KC_INS, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + // MACRODOWN only works in this function + + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + // Layer LED indicators + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + xd60_wasd_leds_on(); + xd60_fn_led_on(); + xd60_esc_led_on(); + xd60_poker_leds_on(); + } else { + xd60_wasd_leds_off(); + xd60_fn_led_off(); + xd60_esc_led_off(); + xd60_poker_leds_off(); + } +}; diff --git a/keyboards/xd60/readme.md b/keyboards/xd60/readme.md new file mode 100644 index 000000000..393ea5d68 --- /dev/null +++ b/keyboards/xd60/readme.md @@ -0,0 +1,13 @@ +# QMK Firmware for XIUDI's 60% XD60 PCB + +![Top View of XD60 Keyboard, with DSA Dolch keycaps](./top-view.JPG) +![Angled View of XD60 Keyboard Arrow Cluster, with DSA Dolch keycaps](./arrow-cluster.JPG) + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Additional Notes +The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page. + +## Build +To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/rules.mk b/keyboards/xd60/rules.mk new file mode 100644 index 000000000..e0b92121d --- /dev/null +++ b/keyboards/xd60/rules.mk @@ -0,0 +1,65 @@ +# MCU name +# MCU = at90usb1287 +MCU = atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# LUFA specific +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xd60/top-view.JPG b/keyboards/xd60/top-view.JPG new file mode 100644 index 000000000..613759b4d Binary files /dev/null and b/keyboards/xd60/top-view.JPG differ diff --git a/keyboards/xd60/xd60.c b/keyboards/xd60/xd60.c new file mode 100644 index 000000000..4307f5f59 --- /dev/null +++ b/keyboards/xd60/xd60.c @@ -0,0 +1,25 @@ +#include "xd60.h" + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (usb_led & (1<