diff --git a/keyboards/crkbd/keymaps/kidbrazil/config.h b/keyboards/crkbd/keymaps/kidbrazil/config.h index dd3f1a030..6dc468c59 100644 --- a/keyboards/crkbd/keymaps/kidbrazil/config.h +++ b/keyboards/crkbd/keymaps/kidbrazil/config.h @@ -52,49 +52,64 @@ along with this program. If not, see . #endif #ifdef RGB_MATRIX_ENABLE -//# define RGB_MATRIX_KEYPRESSES // reacts to keypresses -// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) -// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended -# define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) -// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) -# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. -# define RGB_MATRIX_HUE_STEP 8 -# define RGB_MATRIX_SAT_STEP 8 -# define RGB_MATRIX_VAL_STEP 8 -# define RGB_MATRIX_SPD_STEP 10 + //# define RGB_MATRIX_KEYPRESSES // reacts to keypresses + // # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) + // # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects + #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended + #define RGB_MATRIX_FRAMEBUFFER_EFFECTS + // # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) + // # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. + #define RGB_MATRIX_HUE_STEP 4 + #define RGB_MATRIX_SAT_STEP 4 + #define RGB_MATRIX_VAL_STEP 4 + #define RGB_MATRIX_SPD_STEP 10 -/* Disable the animations you don't want/need. You will need to disable a good number of these * - * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// # define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + /* Disable the animations you don't want/need. You will need to disable a good number of these * + * because they take up a lot of space. Disable until you can successfully compile your firmware. */ + #define DISABLE_RGB_MATRIX_ALPHAS_MODS + #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN + #define DISABLE_RGB_MATRIX_BREATHING + #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT + #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL + #define DISABLE_RGB_MATRIX_BAND_SAT + #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT + #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL + #define DISABLE_RGB_MATRIX_BAND_VAL + #define DISABLE_RGB_MATRIX_CYCLE_ALL + #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT + #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN + #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL + #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL + #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL + #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN + #define DISABLE_RGB_MATRIX_DUAL_BEACON + #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + #define DISABLE_RGB_MATRIX_SOLID_SPLASH + #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define DISABLE_RGB_MATRIX_SOLID_SPLASH + #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define DISABLE_RGB_MATRIX_SPLASH + #define DISABLE_RGB_MATRIX_MULTISPLASH + #define DISABLE_RGB_MATRIX_SPLASH + #define DISABLE_RGB_MATRIX_MULTISPLASH #endif +// Custom Font path #define OLED_FONT_H "keyboards/crkbd/keymaps/kidbrazil/glcdfont.c" #define OLED_DISABLE_TIMEOUT diff --git a/keyboards/crkbd/keymaps/kidbrazil/enums.h b/keyboards/crkbd/keymaps/kidbrazil/enums.h new file mode 100644 index 000000000..ec1a67925 --- /dev/null +++ b/keyboards/crkbd/keymaps/kidbrazil/enums.h @@ -0,0 +1,10 @@ +// [CRKBD layers Init] -------------------------------------------------------// +typedef enum { + _QWERTY, + _NUM, + _SYM, + _GAME, + _WEAPON +}CRKBD_LAYERS; + +extern enum CRKBD_LAYERS crkbd_layers; diff --git a/keyboards/crkbd/keymaps/kidbrazil/keymap.c b/keyboards/crkbd/keymaps/kidbrazil/keymap.c index 44142d4f2..9c950e537 100644 --- a/keyboards/crkbd/keymaps/kidbrazil/keymap.c +++ b/keyboards/crkbd/keymaps/kidbrazil/keymap.c @@ -1,4 +1,6 @@ #include QMK_KEYBOARD_H +#include "enums.h" +#include "layer.h" // [Init Variables] ----------------------------------------------------------// extern uint8_t is_master; @@ -9,15 +11,6 @@ bool user_led_enabled = true; // Boolean to store the master LED clear so it only runs once. bool master_oled_cleared = false; -// [CRKBD layers Init] -------------------------------------------------------// -enum crkbd_layers { - _QWERTY, - _NUM, - _SYM, - _GAME, - _WEAPON -}; - // [Keymaps] -----------------------------------------------------------------// const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT( @@ -36,8 +29,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_SYM] = LAYOUT( KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, - LSFT_T(KC_TAB), RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, - KC_LCTL, RGB_VAD, RGB_RMOD, RGB_HUD, RGB_SAD, TG(_GAME), KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD, + LSFT_T(KC_TAB), RGB_TOG, KC_MPLY, KC_MUTE, KC_VOLU, KC_VOLD, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, + KC_LCTL, KC_CALC, KC_MYCM, KC_MPRV, KC_MNXT, TG(_GAME), KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD, LGUI_T(KC_PGUP), KC_TRNS, KC_SPC, KC_ENT, KC_TRNS, LALT_T(KC_PGDN) ), @@ -51,7 +44,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_WEAPON] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, KC_TRNS, KC_TAB, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS ) }; @@ -61,23 +54,24 @@ void keyboard_post_init_user(void) { // Set RGB to known state rgb_matrix_enable_noeeprom(); rgb_matrix_set_color_all(RGB_GREEN); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); user_led_enabled = true; - } // [Process User Input] ------------------------------------------------------// bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { + // Handle RGB Changes sans eeprom - necessary due to the layer dependent RGB color + // changes in marrix_scan_user case RGB_TOG: - if (record->event.pressed) { - // Toggle matrix on key press - user_led_enabled ? rgb_matrix_disable_noeeprom() : rgb_matrix_enable_noeeprom(); - } else { - // Flip User_led_enabled variable on key release - user_led_enabled = !user_led_enabled; - } - return false; // Skip all further processing of this key + if (record->event.pressed) { + // Toggle matrix on key press + user_led_enabled ? rgb_matrix_disable_noeeprom() : rgb_matrix_enable_noeeprom(); + // Toggle boolean flag + user_led_enabled = !user_led_enabled; + } + return false; default: - // Use process_record_keymap to reset timer on all other keypresses + // Use process_record_keymap to reset timer on all other keypresses to awaken from idle. if (record->event.pressed) { #ifdef OLED_DRIVER_ENABLE oled_timer = timer_read32(); @@ -91,9 +85,47 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } +// [Matrix Scan] ------------------------------------------------------------// +void matrix_scan_user(void) { + // Iddle timer to return to default layer if left on game layer + if (timer_elapsed32(oled_timer) > 380000 && timer_elapsed32(oled_timer) < 479999) { + // Reset layer in case it got left on _GAME + // This prevents the issue where the master side sometimes wont switch off as expected + // in the next step. + if (get_highest_layer(layer_state) == _GAME) { + layer_off(_GAME); + layer_on(_QWERTY); + } + return; + } + // Timeout to turn off LEDs + else if (timer_elapsed32(oled_timer) > 480000) { + rgb_matrix_disable_noeeprom(); + return; + } + // Set RGB Matrix color based on layers + if (user_led_enabled) { + switch (get_highest_layer(layer_state)){ + case _GAME: + rgb_matrix_set_color_all(RGB_PURPLE); + break; + case _NUM: + case _SYM: + case _QWERTY: + rgb_matrix_set_color_all(RGB_GREEN); + break; + default: + rgb_matrix_set_color_all(RGB_GREEN); + break; + + } + } else { + rgb_matrix_disable_noeeprom(); + return; + } +} // [OLED Configuration] ------------------------------------------------------// #ifdef OLED_DRIVER_ENABLE - // Init Oled and Rotate.... oled_rotation_t oled_init_user(oled_rotation_t rotation) { if (!has_usb()) @@ -105,74 +137,6 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { const char *read_logo(void); // {OLED helpers} -----------------------------------------------// - -// Render Blank Space -void render_space(void) { - oled_write_ln_P(PSTR(" "), false); -} - -// Render separator lines for oled display -void render_separator(void) { - switch (get_highest_layer(layer_state)){ - case _GAME: - case _WEAPON: - oled_write_ln_P(PSTR("===================="), false); - break; - default: - oled_write_ln_P(PSTR("++++++++++++++++++++"), false); - } -} - -// Render current layer state -void render_layer_state(void){ - // If you want to change the display of OLED, you need to change here - switch (get_highest_layer(layer_state)){ - case _QWERTY: - oled_write_ln_P(PSTR("| MODE | QWRTY ]"), false); - break; - case _NUM: - oled_write_ln_P(PSTR("| MODE | NUMBERS ]"), false); - break; - case _SYM: - oled_write_ln_P(PSTR("| MODE | SYMBOLS ]"), false); - break; - case _GAME: - oled_write_ln_P(PSTR("| G A M E ]"), false); - break; - case _WEAPON: - oled_write_ln_P(PSTR("| W E A P O N ]"), false); - break; - default: - oled_write_ln_P(PSTR("| MODE | UNDEF ]"), false); - } -} - -// Render USB State -void render_usb_state(void) { - switch (USB_DeviceState) { - case DEVICE_STATE_Unattached: - oled_write_ln_P(PSTR("| USB | FREE ]"), false); - break; - case DEVICE_STATE_Suspended: - oled_write_ln_P(PSTR("| USB | SLEEP ]"), false); - break; - case DEVICE_STATE_Configured: - oled_write_ln_P(PSTR("| USB | READY ]"), false); - break; - case DEVICE_STATE_Powered: - oled_write_ln_P(PSTR("| USB | PWRD ]"), false); - break; - case DEVICE_STATE_Default: - oled_write_ln_P(PSTR("| USB | DFLT ]"), false); - break; - case DEVICE_STATE_Addressed: - oled_write_ln_P(PSTR("| USB | ADDRS ]"), false); - break; - default: - oled_write_ln_P(PSTR("| USB | INVALID ]"), false); - } -} - // Render Logo void render_logo(void) { oled_write(read_logo(), false); @@ -209,7 +173,8 @@ void render_slave_oled(void) { // {OLED Task} -----------------------------------------------// void oled_task_user(void) { - if (timer_elapsed32(oled_timer) > 80000 && timer_elapsed32(oled_timer) < 479999) { + // First time out switches to logo as first indication of iddle. + if (timer_elapsed32(oled_timer) > 100000 && timer_elapsed32(oled_timer) < 479999) { // Render logo on both halves before full timeout if (is_master && !master_oled_cleared) { // Clear master OLED once so the logo renders properly diff --git a/keyboards/crkbd/keymaps/kidbrazil/layer.c b/keyboards/crkbd/keymaps/kidbrazil/layer.c new file mode 100644 index 000000000..bd04f3b88 --- /dev/null +++ b/keyboards/crkbd/keymaps/kidbrazil/layer.c @@ -0,0 +1,69 @@ +#include QMK_KEYBOARD_H +#include "enums.h" + +// Render Blank Space +void render_space(void) { + oled_write_ln_P(PSTR(" "), false); +} + +// Render separator lines for oled display +void render_separator(void) { + switch (get_highest_layer(layer_state)){ + case _GAME: + case _WEAPON: + oled_write_ln_P(PSTR("===================="), false); + break; + default: + oled_write_ln_P(PSTR("++++++++++++++++++++"), false); + } +} + +// Render current layer state +void render_layer_state(void){ + // If you want to change the display of OLED, you need to change here + switch (get_highest_layer(layer_state)){ + case _QWERTY: + oled_write_ln_P(PSTR("| MODE | QWRTY ]"), false); + break; + case _NUM: + oled_write_ln_P(PSTR("| MODE | NUMBERS ]"), false); + break; + case _SYM: + oled_write_ln_P(PSTR("| MODE | SYMBOLS ]"), false); + break; + case _GAME: + oled_write_ln_P(PSTR("| G A M E ]"), false); + break; + case _WEAPON: + oled_write_ln_P(PSTR("| W E A P O N ]"), false); + break; + default: + oled_write_ln_P(PSTR("| MODE | UNDEF ]"), false); + } +} + +// Render USB State +void render_usb_state(void) { + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + oled_write_ln_P(PSTR("| USB | FREE ]"), false); + break; + case DEVICE_STATE_Suspended: + oled_write_ln_P(PSTR("| USB | SLEEP ]"), false); + break; + case DEVICE_STATE_Configured: + oled_write_ln_P(PSTR("| USB | READY ]"), false); + break; + case DEVICE_STATE_Powered: + oled_write_ln_P(PSTR("| USB | PWRD ]"), false); + break; + case DEVICE_STATE_Default: + oled_write_ln_P(PSTR("| USB | DFLT ]"), false); + break; + case DEVICE_STATE_Addressed: + oled_write_ln_P(PSTR("| USB | ADDRS ]"), false); + break; + default: + oled_write_ln_P(PSTR("| USB | INVALID ]"), false); + } +} diff --git a/keyboards/crkbd/keymaps/kidbrazil/layer.h b/keyboards/crkbd/keymaps/kidbrazil/layer.h new file mode 100644 index 000000000..2134e6dda --- /dev/null +++ b/keyboards/crkbd/keymaps/kidbrazil/layer.h @@ -0,0 +1,9 @@ +// [OLED Helpers] ----------------------------------------------------// +// Render empty space on OLED +void render_space(void); +// Render separator characters for rows +void render_separator(void); +// Render layer state +void render_layer_state(void); +// Render USB State +void render_usb_state(void); diff --git a/keyboards/crkbd/keymaps/kidbrazil/rules.mk b/keyboards/crkbd/keymaps/kidbrazil/rules.mk index ad03b86bf..244712cd0 100644 --- a/keyboards/crkbd/keymaps/kidbrazil/rules.mk +++ b/keyboards/crkbd/keymaps/kidbrazil/rules.mk @@ -8,10 +8,5 @@ RGB_MATRIX_ENABLE = WS2812 OLED_DRIVER_ENABLE = yes # If you want to change the display of OLED, you need to change here -SRC += ./keyboards/crkbd/keymaps/kidbrazil/logo_reader.c \ - #./lib/rgb_state_reader.c \ - #./lib/logo_reader.c \ - #./lib/keylogger.c \ - # ./lib/mode_icon_reader.c \ - # ./lib/host_led_state_reader.c \ - # ./lib/timelogger.c \ +SRC += logo_reader.c \ + layer.c