Added tmk whitefox led files
This commit is contained in:
jpetermans
parent
dfb0a512a0
commit
b73c935d36
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -19,6 +19,32 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#include "led.h"
|
||||
|
||||
#include "led_controller.h"
|
||||
|
||||
/* WARNING! This function needs to be callable from
|
||||
* both regular threads and ISRs, unlocked (during resume-from-sleep).
|
||||
* In particular, I2C functions (interrupt-driven) should NOT be called from here.
|
||||
*/
|
||||
void led_set(uint8_t usb_led) {
|
||||
/*
|
||||
// PTA5: LED (1:on/0:off)
|
||||
GPIOA->PDDR |= (1<<1);
|
||||
PORTA->PCR[5] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
GPIOA->PSOR |= (1<<5);
|
||||
} else {
|
||||
GPIOA->PCOR |= (1<<5);
|
||||
}
|
||||
*/
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// signal the LED control thread
|
||||
chSysUnconditionalLock();
|
||||
chMBPostI(&led_mailbox, LED_MSG_CAPS_ON);
|
||||
chSysUnconditionalUnlock();
|
||||
} else {
|
||||
// signal the LED control thread
|
||||
chSysUnconditionalLock();
|
||||
chMBPostI(&led_mailbox, LED_MSG_CAPS_OFF);
|
||||
chSysUnconditionalUnlock();
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,354 @@
|
|||
/*
|
||||
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* LED controller code
|
||||
* WF uses IS31FL3731C matrix LED driver from ISSI
|
||||
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
|
||||
*/
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
#include "led_controller.h"
|
||||
|
||||
#include "hook.h"
|
||||
#include "suspend.h"
|
||||
|
||||
#include "usb_main.h"
|
||||
|
||||
/* WF LED MAP
|
||||
- digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
|
||||
|
||||
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27 28
|
||||
31 32 33 34 35 36 37 38 41 42 43 44 45 46 47
|
||||
48 51 52 53 54 55 56 57 58 61 62 63 64 65 66
|
||||
67 68 71 72 73 74 75 76 77 78 81 82 83 84 85
|
||||
86 87 88 91 92 93 (94) 95 96 97
|
||||
*/
|
||||
|
||||
/*
|
||||
each page has 0xB4 bytes
|
||||
0 - 0x11: LED control (on/off):
|
||||
order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
|
||||
CAn controls Cn-8 .. Cn-1 (LSbit)
|
||||
0x12 - 0x23: blink control (like "LED control")
|
||||
0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
|
||||
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
|
||||
*/
|
||||
|
||||
/* Which LED should be used for CAPS LOCK indicator
|
||||
* The usual Caps Lock position is C4-8, so the address is
|
||||
* 0x24 + (4-1)*0x10 + (8-1) = 0x5B */
|
||||
#if !defined(CAPS_LOCK_LED_ADDRESS)
|
||||
#define CAPS_LOCK_LED_ADDRESS 0x5B
|
||||
#endif
|
||||
|
||||
/* Which LED should breathe during sleep */
|
||||
#if !defined(BREATHE_LED_ADDRESS)
|
||||
#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
|
||||
#endif
|
||||
|
||||
/* =================
|
||||
* ChibiOS I2C setup
|
||||
* ================= */
|
||||
static const I2CConfig i2ccfg = {
|
||||
400000 // clock speed (Hz); 400kHz max for IS31
|
||||
};
|
||||
|
||||
/* ==============
|
||||
* variables
|
||||
* ============== */
|
||||
// internal communication buffers
|
||||
uint8_t tx[2] __attribute__((aligned(2)));
|
||||
uint8_t rx[1] __attribute__((aligned(2)));
|
||||
|
||||
// buffer for sending the whole page at once (used also as a temp buffer)
|
||||
uint8_t full_page[0xB4+1] = {0};
|
||||
|
||||
// LED mask (which LEDs are present, selected by bits)
|
||||
const uint8_t is31_wf_leds_mask[0x12] = {
|
||||
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
|
||||
0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00
|
||||
};
|
||||
|
||||
/* ============================
|
||||
* communication functions
|
||||
* ============================ */
|
||||
msg_t is31_select_page(uint8_t page) {
|
||||
tx[0] = IS31_COMMANDREGISTER;
|
||||
tx[1] = page;
|
||||
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
||||
}
|
||||
|
||||
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
|
||||
is31_select_page(page);
|
||||
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, US2ST(IS31_TIMEOUT));
|
||||
}
|
||||
|
||||
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
|
||||
is31_select_page(page);
|
||||
tx[0] = reg;
|
||||
tx[1] = data;
|
||||
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
||||
}
|
||||
|
||||
msg_t is31_read_register(uint8_t b, uint8_t reg, uint8_t *result) {
|
||||
is31_select_page(b);
|
||||
|
||||
tx[0] = reg;
|
||||
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
|
||||
}
|
||||
|
||||
/* ========================
|
||||
* initialise the IS31 chip
|
||||
* ======================== */
|
||||
void is31_init(void) {
|
||||
// just to be sure that it's all zeroes
|
||||
__builtin_memset(full_page,0,0xB4+1);
|
||||
// zero function page, all registers (assuming full_page is all zeroes)
|
||||
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
||||
// disable hardware shutdown
|
||||
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPad(GPIOB, 16);
|
||||
chThdSleepMilliseconds(10);
|
||||
// software shutdown
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
|
||||
chThdSleepMilliseconds(10);
|
||||
// zero function page, all registers
|
||||
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
||||
chThdSleepMilliseconds(10);
|
||||
// software shutdown disable (i.e. turn stuff on)
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
|
||||
chThdSleepMilliseconds(10);
|
||||
// zero all LED registers on all 8 pages
|
||||
uint8_t i;
|
||||
for(i=0; i<8; i++) {
|
||||
is31_write_data(i, full_page, 0xB4 + 1);
|
||||
chThdSleepMilliseconds(1);
|
||||
}
|
||||
}
|
||||
|
||||
/* ==================
|
||||
* LED control thread
|
||||
* ================== */
|
||||
#define LED_MAILBOX_NUM_MSGS 5
|
||||
static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
|
||||
mailbox_t led_mailbox;
|
||||
static THD_WORKING_AREA(waLEDthread, 256);
|
||||
static THD_FUNCTION(LEDthread, arg) {
|
||||
(void)arg;
|
||||
chRegSetThreadName("LEDthread");
|
||||
|
||||
uint8_t temp;
|
||||
uint8_t save_page, save_breath1, save_breath2;
|
||||
msg_t msg, retval;
|
||||
|
||||
while(true) {
|
||||
// wait for a message (asynchronous)
|
||||
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
|
||||
// be processed right away)
|
||||
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
|
||||
|
||||
// process 'msg' here
|
||||
switch(msg) {
|
||||
case LED_MSG_CAPS_ON:
|
||||
// turn caps on on pages 1 and 2
|
||||
is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0xFF);
|
||||
break;
|
||||
case LED_MSG_CAPS_OFF:
|
||||
// turn caps off on pages 1 and 2
|
||||
is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
break;
|
||||
case LED_MSG_SLEEP_LED_ON:
|
||||
// save current settings
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
|
||||
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
|
||||
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
||||
retval = MSG_TIMEOUT;
|
||||
temp = 6;
|
||||
while(retval == MSG_TIMEOUT) {
|
||||
// switch to the other page
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
|
||||
temp = (temp == 6 ? 7 : 6);
|
||||
// the times should be sufficiently long for IS31 to finish switching pages
|
||||
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
|
||||
}
|
||||
// received a message (should be a wakeup), so restore previous state
|
||||
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
|
||||
// note: any other messages are queued
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
|
||||
break;
|
||||
case LED_MSG_SLEEP_LED_OFF:
|
||||
// should not get here; wakeup should be received in the branch above
|
||||
break;
|
||||
case LED_MSG_ALL_TOGGLE:
|
||||
// read current page into 'temp'
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
chThdSleepMilliseconds(1);
|
||||
// switch to 'the other' page
|
||||
if(temp==2) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
} else {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 2);
|
||||
}
|
||||
break;
|
||||
case LED_MSG_GAME_TOGGLE:
|
||||
// read current page into 'temp'
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
chThdSleepMilliseconds(1);
|
||||
// switch to 'the other' page
|
||||
if(temp==1) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
} else {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* LED game mode */
|
||||
const uint8_t led_game[83] = {
|
||||
0x24,
|
||||
0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x34,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x44,
|
||||
0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x54,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x64,
|
||||
0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x74,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x84,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x94,
|
||||
0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00,
|
||||
0xA4,
|
||||
0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00,
|
||||
};
|
||||
|
||||
/* ALL LEDs */
|
||||
const uint8_t led_all[83] = {
|
||||
0x24,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x34,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x44,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x54,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x64,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x74,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x84,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0x94,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0xA4,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
};
|
||||
|
||||
/* =============
|
||||
* hook into TMK
|
||||
* ============= */
|
||||
void hook_early_init(void) {
|
||||
uint8_t i;
|
||||
|
||||
/* initialise I2C */
|
||||
/* I2C pins */
|
||||
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
|
||||
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
|
||||
/* start I2C */
|
||||
i2cStart(&I2CD1, &i2ccfg);
|
||||
// try high drive (from kiibohd)
|
||||
I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
|
||||
// try glitch fixing (from kiibohd)
|
||||
I2CD1.i2c->FLT = 4;
|
||||
|
||||
chThdSleepMilliseconds(10);
|
||||
|
||||
/* initialise IS31 chip */
|
||||
is31_init();
|
||||
|
||||
/* enable WF LEDs on all pages */
|
||||
full_page[0] = 0;
|
||||
__builtin_memcpy(full_page+1, is31_wf_leds_mask, 0x12);
|
||||
for(i=0; i<8; i++) {
|
||||
is31_write_data(i, full_page, 1+0x12);
|
||||
}
|
||||
|
||||
/* enable breathing when the displayed page changes */
|
||||
// Fade-in Fade-out, time = 26ms * 2^N, N=3
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
||||
|
||||
/* Write pages */
|
||||
for(i=0; i<9; i++) {
|
||||
is31_write_data(1,(uint8_t *)(led_game+(9*i)),9);
|
||||
chThdSleepMilliseconds(5);
|
||||
is31_write_data(2,(uint8_t *)(led_all+(9*i)),9);
|
||||
chThdSleepMilliseconds(5);
|
||||
}
|
||||
|
||||
// clean up the capslock LED
|
||||
is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
|
||||
|
||||
/* more time consuming LED processing should be offloaded into
|
||||
* a thread, with asynchronous messaging. */
|
||||
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
|
||||
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
|
||||
}
|
||||
|
||||
void hook_usb_suspend_entry(void) {
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
chSysLockFromISR();
|
||||
chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
|
||||
chSysUnlockFromISR();
|
||||
#endif /* SLEEP_LED_ENABLE */
|
||||
}
|
||||
|
||||
void hook_usb_suspend_loop(void) {
|
||||
chThdSleepMilliseconds(100);
|
||||
/* Remote wakeup */
|
||||
if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
|
||||
send_remote_wakeup(&USB_DRIVER);
|
||||
}
|
||||
}
|
||||
|
||||
void hook_usb_wakeup(void) {
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
chSysLockFromISR();
|
||||
chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
|
||||
chSysUnlockFromISR();
|
||||
#endif /* SLEEP_LED_ENABLE */
|
||||
}
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
/*
|
||||
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _LED_CONTROLLER_H_
|
||||
#define _LED_CONTROLLER_H_
|
||||
|
||||
/* =========================
|
||||
* communication functions
|
||||
* ========================= */
|
||||
|
||||
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
|
||||
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
|
||||
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
|
||||
|
||||
/* =============================
|
||||
* IS31 chip related definitions
|
||||
* ============================= */
|
||||
|
||||
#define IS31_ADDR_DEFAULT 0x74
|
||||
|
||||
#define IS31_REG_CONFIG 0x00
|
||||
// bits in reg
|
||||
#define IS31_REG_CONFIG_PICTUREMODE 0x00
|
||||
#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
|
||||
#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
|
||||
// D2:D0 bits are starting frame for autoplay mode
|
||||
|
||||
#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
|
||||
|
||||
#define IS31_REG_AUTOPLAYCTRL1 0x02
|
||||
// D6:D4 number of loops (000=infty)
|
||||
// D2:D0 number of frames to be used
|
||||
|
||||
#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
|
||||
|
||||
#define IS31_REG_DISPLAYOPT 0x05
|
||||
#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
|
||||
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
|
||||
// D2:D0 bits blink period time (*0.27s)
|
||||
|
||||
#define IS31_REG_AUDIOSYNC 0x06
|
||||
#define IS31_REG_AUDIOSYNC_ENABLE 0x1
|
||||
|
||||
#define IS31_REG_FRAMESTATE 0x07
|
||||
|
||||
#define IS31_REG_BREATHCTRL1 0x08
|
||||
// D6:D4 fade out time (26ms*2^i)
|
||||
// D2:D0 fade in time (26ms*2^i)
|
||||
|
||||
#define IS31_REG_BREATHCTRL2 0x09
|
||||
#define IS31_REG_BREATHCTRL2_ENABLE 0x10
|
||||
// D2:D0 extinguish time (3.5ms*2^i)
|
||||
|
||||
#define IS31_REG_SHUTDOWN 0x0A
|
||||
#define IS31_REG_SHUTDOWN_ON 0x1
|
||||
|
||||
#define IS31_REG_AGCCTRL 0x0B
|
||||
#define IS31_REG_ADCRATE 0x0C
|
||||
|
||||
#define IS31_COMMANDREGISTER 0xFD
|
||||
#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
|
||||
|
||||
#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
|
||||
|
||||
/* ==============================
|
||||
* LED Thread related definitions
|
||||
* ============================== */
|
||||
|
||||
extern mailbox_t led_mailbox;
|
||||
|
||||
// constants for signaling the LED controller thread
|
||||
#define LED_MSG_CAPS_ON 1
|
||||
#define LED_MSG_CAPS_OFF 2
|
||||
#define LED_MSG_SLEEP_LED_ON 3
|
||||
#define LED_MSG_SLEEP_LED_OFF 4
|
||||
#define LED_MSG_ALL_TOGGLE 5
|
||||
#define LED_MSG_GAME_TOGGLE 6
|
||||
|
||||
#endif /* _LED_CONTROLLER_H_ */
|
||||
Loading…
Reference in New Issue