Puck Macropad (#4274)

* Add Puck

* Update Manufacturer name in metadata

* Add num lock to high layer

* update pins

* update pin settings

* fix numlock key

* Cleanup config.h

* Update device info

* updates after review
This commit is contained in:
John Pettigrew 2018-11-27 15:43:48 -06:00 committed by MechMerlin
parent 90f9fb4eee
commit d79b5e67b6
6 changed files with 190 additions and 0 deletions

31
keyboards/puck/config.h Normal file
View File

@ -0,0 +1,31 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER OkKeebs LLC
#define PRODUCT Puck
#define DESCRIPTION 4x3 macropad
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 3
#define MATRIX_ROW_PINS { D2, D3, C6, C7 }
#define MATRIX_COL_PINS { B4, D7, D6 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

View File

@ -0,0 +1,64 @@
#include QMK_KEYBOARD_H
#define _BL 0
#define _HL 1
#define _LL 2
enum keycodes {
LOW,
HIGH
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* Base Layer (Numbers)
*/
[_BL] = LAYOUT(
KC_KP_7, KC_KP_8, KC_KP_9,
KC_KP_4, KC_KP_5, KC_KP_6,
KC_KP_1, KC_KP_2, KC_KP_3,
LOW, KC_KP_0, HIGH
),
/*
* High Layer (Work)
*/
[_HL] = LAYOUT(
KC_NUMLOCK, KC_PAST, KC_NO,
KC_PMNS, KC_PENT, KC_PPLS,
KC_NO, KC_PSLS, KC_NO,
KC_NO, KC_PDOT, KC_NO
),
/*
* Low Layer (Media)
*/
[_LL] = LAYOUT(
KC_NO, KC_VOLU, KC_NO,
KC_MPRV, KC_MPLY, KC_MNXT,
KC_NO, KC_VOLD, KC_NO,
KC_NO, KC_NO, KC_NO
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch(keycode) {
case HIGH:
if (record->event.pressed) {
layer_on(_HL);
}else{
layer_off(_HL);
layer_off(_LL);
}
return false;
break;
case LOW:
if (record->event.pressed) {
layer_on(_LL);
}else{
layer_off(_LL);
layer_off(_HL);
}
return false;
break;
}
return true;
}

1
keyboards/puck/puck.c Normal file
View File

@ -0,0 +1 @@
#include "puck.h"

15
keyboards/puck/puck.h Normal file
View File

@ -0,0 +1,15 @@
#ifndef PUCK_H
#define PUCK_H
#include "quantum.h"
#define LAYOUT( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B \
) { \
{ K00, K01, K02 }, \
{ K03, K04, K05 }, \
{ K06, K07, K08 }, \
{ K09, K0A, K0B }, \
}
#endif

11
keyboards/puck/readme.md Normal file
View File

@ -0,0 +1,11 @@
A 4 x 3 macropad.
Keyboard Maintainer: [john-pettigrew](https://github.com/john-pettigrew)
Hardware Supported: Puck PCB.
Hardware Availability: [OkKeebs.com](https://okkeebs.com/products/puck-pcb)
Make example for this keyboard (after setting up your build environment):
make puck:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

68
keyboards/puck/rules.mk Normal file
View File

@ -0,0 +1,68 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
BOOTLOADER = halfkay
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend