diff --git a/docs/flashing.md b/docs/flashing.md index b47a5ebf8..00350b840 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -10,11 +10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead): - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = atmel-dfu +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu +``` Compatible flashers: @@ -64,11 +70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = caterina +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina +``` Compatible flashers: @@ -100,11 +112,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = halfkay +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay +``` Compatible flashers: @@ -125,11 +143,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = USBasp +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = USBasp +``` Compatible flashers: @@ -150,11 +174,17 @@ BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requ To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = bootloadHID +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID +``` Compatible flashers: diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk index cd8edc611..3ac90cf97 100644 --- a/keyboards/ares/rules.mk +++ b/keyboards/ares/rules.mk @@ -15,18 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -38,11 +35,7 @@ COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no RGBLIGHT_CUSTOM_DRIVER = yes -NO_UART = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk index 6577ea193..b5b3b852c 100644 --- a/keyboards/bfake/rules.mk +++ b/keyboards/bfake/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/canoe/rules.mk b/keyboards/canoe/rules.mk index 3d7bc0215..8cfc81056 100644 --- a/keyboards/canoe/rules.mk +++ b/keyboards/canoe/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index bc81342de..24b5969b7 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -1,61 +1,19 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. +# Processor frequency F_CPU = 16000000 -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID -# -# This uses usbaspbootloader +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = USBasp -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 - # Flash program via avrdude, but default command is not suitable. # You can use plaid:default:program PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex @@ -84,8 +42,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - LAYOUTS = 65_ansi diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk index 67697ac73..4f9e0e412 100644 --- a/keyboards/donutcables/budget96/rules.mk +++ b/keyboards/donutcables/budget96/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,6 +40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/eve/meteor/rules.mk b/keyboards/eve/meteor/rules.mk index 10fc8cd03..e43baee5c 100644 --- a/keyboards/eve/meteor/rules.mk +++ b/keyboards/eve/meteor/rules.mk @@ -16,10 +16,14 @@ # MCU name MCU = atmega32a -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index a9156adeb..13a5f1b89 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -1,46 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - # Bootloader selection # Teensy halfkay @@ -48,20 +7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -84,6 +33,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index a9156adeb..13a5f1b89 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -1,46 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - # Bootloader selection # Teensy halfkay @@ -48,20 +7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -84,6 +33,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk index b939b0fd2..c9942e369 100644 --- a/keyboards/facew/rules.mk +++ b/keyboards/facew/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,7 +41,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = 60_ansi diff --git a/keyboards/ft/mars80/rules.mk b/keyboards/ft/mars80/rules.mk index 159307f8d..f1c79b196 100644 --- a/keyboards/ft/mars80/rules.mk +++ b/keyboards/ft/mars80/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,7 +40,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index 9afbd0964..aa228c875 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -10,9 +10,8 @@ MCU = atmega328p # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID -# -# This uses usbaspbootloader +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk index c3e17e493..5339aad89 100644 --- a/keyboards/gray_studio/hb85/rules.mk +++ b/keyboards/gray_studio/hb85/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 341b8d03d..bbdf5176c 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -1,7 +1,15 @@ # MCU name MCU = atmega328p -BOOTLOADER = bootloadHID +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. # You can use hnah40:default:program diff --git a/keyboards/jc65/v32a/rules.mk b/keyboards/jc65/v32a/rules.mk index fac85172e..ee6efb3fa 100644 --- a/keyboards/jc65/v32a/rules.mk +++ b/keyboards/jc65/v32a/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index 3e496f97e..b0bf574bd 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # Build Options @@ -54,7 +50,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) SRC += i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index 3ac2cc043..fedc525f8 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # Build Options @@ -54,7 +50,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) SRC += i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = ortho_4x4 diff --git a/keyboards/jj50/keymaps/archetype/rules.mk b/keyboards/jj50/keymaps/archetype/rules.mk index e32e8ce74..1a63376be 100644 --- a/keyboards/jj50/keymaps/archetype/rules.mk +++ b/keyboards/jj50/keymaps/archetype/rules.mk @@ -16,19 +16,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -59,7 +55,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c -# programming options -PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex - LAYOUTS = ortho_5x12 diff --git a/keyboards/jj50/rules.mk b/keyboards/jj50/rules.mk index 2390d9631..b23b4becd 100644 --- a/keyboards/jj50/rules.mk +++ b/keyboards/jj50/rules.mk @@ -16,14 +16,6 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 # Bootloader selection # Teensy halfkay @@ -31,7 +23,8 @@ F_CPU = 12000000 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -60,7 +53,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = ortho_5x12 diff --git a/keyboards/kbdfans/kbdpad/mk1/rules.mk b/keyboards/kbdfans/kbdpad/mk1/rules.mk index 421b0cf32..e43baee5c 100644 --- a/keyboards/kbdfans/kbdpad/mk1/rules.mk +++ b/keyboards/kbdfans/kbdpad/mk1/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 QUANTUM_LIB_SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk index 11bd8955f..3510ca6f3 100644 --- a/keyboards/mechmini/v1/rules.mk +++ b/keyboards/mechmini/v1/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/mehkee96/rules.mk b/keyboards/mehkee96/rules.mk index f7fb397e2..244dd2141 100644 --- a/keyboards/mehkee96/rules.mk +++ b/keyboards/mehkee96/rules.mk @@ -1,18 +1,16 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -F_CPU = 12000000 - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - # Build Options # comment out to disable the options. # @@ -30,6 +28,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index db6ec93f5..19410bc6e 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -1,18 +1,14 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -37,8 +33,5 @@ OPT_DEFS = -DDEBUG_LEVEL=0 CUSTOM_MATRIX = yes SRC = matrix.c i2c.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = planck_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/panc60/rules.mk b/keyboards/panc60/rules.mk index 5531807f1..6ca8d7b78 100644 --- a/keyboards/panc60/rules.mk +++ b/keyboards/panc60/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,7 +41,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index 4db92d121..eacf8bb2c 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,6 +40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/plaid/rules.mk b/keyboards/plaid/rules.mk index 755a4f899..5ac35ee7f 100644 --- a/keyboards/plaid/rules.mk +++ b/keyboards/plaid/rules.mk @@ -7,21 +7,9 @@ MCU = atmega328p # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID -# -# This uses usbaspbootloader -# BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. # You can use plaid:default:program diff --git a/keyboards/singa/rules.mk b/keyboards/singa/rules.mk index 7e4669689..df2a59e90 100644 --- a/keyboards/singa/rules.mk +++ b/keyboards/singa/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/skog/rules.mk b/keyboards/skog/rules.mk index bce0c442a..b8439906b 100644 --- a/keyboards/skog/rules.mk +++ b/keyboards/skog/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -50,6 +46,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/tgr/alice/rules.mk b/keyboards/tgr/alice/rules.mk index eecd38d7e..aa141f7c3 100644 --- a/keyboards/tgr/alice/rules.mk +++ b/keyboards/tgr/alice/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/tgr/jane/rules.mk b/keyboards/tgr/jane/rules.mk index bf9aa79a8..f2b488306 100644 --- a/keyboards/tgr/jane/rules.mk +++ b/keyboards/tgr/jane/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,7 +40,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 QUANTUM_LIB_SRC = i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/unikorn/rules.mk b/keyboards/unikorn/rules.mk index 7d6fa14e1..d4f4d2aaf 100644 --- a/keyboards/unikorn/rules.mk +++ b/keyboards/unikorn/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk index 4e016b47d..12b502785 100644 --- a/keyboards/winkeyless/bface/rules.mk +++ b/keyboards/winkeyless/bface/rules.mk @@ -15,14 +15,16 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID # build options BOOTMAGIC_ENABLE = no @@ -37,11 +39,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -BOOTLOADER = bootloadHID # custom matrix setup SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - diff --git a/keyboards/winkeyless/bmini/rules.mk b/keyboards/winkeyless/bmini/rules.mk index 3d7bc0215..8cfc81056 100644 --- a/keyboards/winkeyless/bmini/rules.mk +++ b/keyboards/winkeyless/bmini/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/winkeyless/bminiex/rules.mk b/keyboards/winkeyless/bminiex/rules.mk index e5d3a2a88..24e434879 100644 --- a/keyboards/winkeyless/bminiex/rules.mk +++ b/keyboards/winkeyless/bminiex/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -51,6 +47,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ymd75/rules.mk b/keyboards/ymd75/rules.mk index 9d09d3da9..7bee20173 100644 --- a/keyboards/ymd75/rules.mk +++ b/keyboards/ymd75/rules.mk @@ -16,19 +16,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -56,7 +52,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk index 1cc4060b0..96441e1b3 100644 --- a/keyboards/ymd96/rules.mk +++ b/keyboards/ymd96/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -53,6 +49,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ymdk/bface/rules.mk b/keyboards/ymdk/bface/rules.mk index 8f1f83f78..7b829530b 100644 --- a/keyboards/ymdk/bface/rules.mk +++ b/keyboards/ymdk/bface/rules.mk @@ -16,6 +16,16 @@ # MCU name MCU = atmega32a +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes @@ -29,5 +39,3 @@ RGBLIGHT_ENABLE = no RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 -BOOTLOADER = bootloadHID - diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk index 670967fbd..634b9c69c 100644 --- a/keyboards/ymdk_np21/rules.mk +++ b/keyboards/ymdk_np21/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -54,6 +50,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/quantum/template/avr/rules.mk b/quantum/template/avr/rules.mk index 50deba92c..0ed05e71b 100644 --- a/quantum/template/avr/rules.mk +++ b/quantum/template/avr/rules.mk @@ -1,17 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # If you don't know the bootloader type, then you can specify the # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line # Teensy halfKay 512 @@ -21,7 +20,6 @@ BOOTLOADER = atmel-dfu # USBaspLoader 2048 # OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change yes to no to disable # diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk index a3ac9bd75..bda115db5 100644 --- a/quantum/template/ps2avrgb/rules.mk +++ b/quantum/template/ps2avrgb/rules.mk @@ -1,10 +1,14 @@ # MCU name MCU = atmega32a -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options