Moved frenchdev to handwired
This commit is contained in:
npoirey
parent
a012c24225
commit
de80e2c756
|
|
@ -1,34 +0,0 @@
|
|||
#ifndef KEYBOARDS_ERGODOX_CONFIG_H_
|
||||
#define KEYBOARDS_ERGODOX_CONFIG_H_
|
||||
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_DELAY 0
|
||||
#define MOUSEKEY_TIME_TO_MAX 5
|
||||
#define MOUSEKEY_MAX_SPEED 2
|
||||
#define MOUSEKEY_WHEEL_DELAY 0
|
||||
|
||||
#define TAPPING_TOGGLE 1
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
|
||||
)
|
||||
|
||||
#ifdef SUBPROJECT_v1
|
||||
#include "v1/config.h"
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
#include "frenchdev.h"
|
||||
#include "debug.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_
|
||||
#define KEYBOARDS_ERGODOX_ERGODOX_H_
|
||||
#ifdef SUBPROJECT_v1
|
||||
#include "v1.h"
|
||||
#endif
|
||||
|
||||
#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
MIDI_ENABLE ?= no
|
||||
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
|
@ -1,80 +0,0 @@
|
|||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# # project specific files
|
||||
SRC = twimaster.c \
|
||||
matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
SLEEP_LED_ENABLE = no
|
||||
API_SYSEX_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
|
@ -1,5 +1,3 @@
|
|||
SUBPROJECT_DEFAULT = v1
|
||||
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
|
|
@ -1,6 +1,5 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
|
||||
Copyright 201 Nicolas Poirey <nicolas.poirey@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -19,15 +18,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#ifndef FRENCHDEV_V1_CONFIG_H
|
||||
#define FRENCHDEV_V1_CONFIG_H
|
||||
|
||||
#include "../config.h"
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x1307
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Sacapuces
|
||||
#define MANUFACTURER Nicolas Poirey
|
||||
#define PRODUCT Frenchdev V1
|
||||
#define DESCRIPTION QMK keyboard firmware for Frenchdev
|
||||
|
||||
|
|
@ -46,6 +43,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define USB_MAX_POWER_CONSUMPTION 500
|
||||
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_DELAY 0
|
||||
#define MOUSEKEY_TIME_TO_MAX 5
|
||||
#define MOUSEKEY_MAX_SPEED 2
|
||||
#define MOUSEKEY_WHEEL_DELAY 0
|
||||
|
||||
#define TAPPING_TOGGLE 1
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
|
||||
)
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
|
|
@ -65,4 +82,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_FUNCTION
|
||||
//#define DEBUG_MATRIX_SCAN_RATE
|
||||
|
||||
#endif
|
||||
#endif //FRENCHDEV_V1_CONFIG_H
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
#include "v1.h"
|
||||
#include "frenchdev.h"
|
||||
#include "i2cmaster.h"
|
||||
|
||||
bool i2c_initialized = 0;
|
||||
|
|
@ -105,7 +105,7 @@ inline void ergodox_led_all_set(uint8_t n)
|
|||
\
|
||||
{ k57, k47, k37, PL1, PL2, PL3 }, \
|
||||
{ k56, k46, k36, k26, k16, k06 }, \
|
||||
{ k55, k44, k35, k25, k15, k05 }, \
|
||||
{ k55, k45, k35, k25, k15, k05 }, \
|
||||
{ k54, k44, k34, k24, k14, k04 }, \
|
||||
{ k53, k43, k33, k23, k13, k03 }, \
|
||||
{ k52, k42, k32, k22, k12, k02 }, \
|
||||
|
|
@ -72,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
KC_ESC, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, BP_DTRM, BP_DCRC, BP_AT, BP_PLUS, BP_MINS, BP_SLSH, BP_ASTR, KC_BSPC, \
|
||||
KC_TAB, BP_B, BP_ECUT, BP_O, BP_P, BP_EGRV, BP_UNDS, BP_EQL, BP_K, BP_V, BP_D, BP_L, BP_J, KC_ENT, \
|
||||
BP_GRV, BP_A, BP_U, BP_E, BP_I, BP_F, BP_SCLN, BP_EXLM, BP_C, BP_T, BP_S, BP_R, BP_N, BP_APOS, \
|
||||
M(M_SF), BP_Z, BP_AGRV, BP_Y, BP_X, BP_W, M(M_SFS), BP_CBSP, M(L2INS), M(L2LOC), BP_CDEL, M(M_SFS),BP_M, BP_G, KC_UP, BP_H, BP_Q, M(M_SF), \
|
||||
M(M_SF), BP_Z, BP_AGRV, BP_Y, BP_X, KC_RBRACKET, M(M_SFS), BP_CBSP, M(L2INS), M(L2LOC), BP_CDEL, M(M_SFS),BP_M, BP_G, KC_UP, BP_H, BP_Q, M(M_SF), \
|
||||
KC_LCTL, KC_LGUI, KC_PSLS, BP_DOT, BP_COMM, KC_SPACE,M(M_L1E), KC_LALT, KC_CAPS, M(M_L1E),KC_SPACE,KC_LEFT, KC_DOWN, KC_RIGHT,BP_COLN, KC_RCTL, \
|
||||
//left pedals
|
||||
M(M_LP), M(M_RP), KC_TRNS, \
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
layout :
|
||||
|
||||
[default layout](http://i.imgur.com/r2Nvr4p.png)
|
||||
|
||||
the thing when finished :
|
||||
http://imgur.com/a/6FY8v
|
||||
|
||||
concept and mockup:
|
||||
http://imgur.com/a/R0vvs
|
||||
|
||||
to build :
|
||||
|
||||
docker run --rm -e keymap=default -e keyboard=frenchdev --rm -v D:/Repositories/qmk:/qmk:rw edasque/qmk_firmware
|
||||
|
|
@ -37,7 +37,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "v1.h"
|
||||
#include "frenchdev.h"
|
||||
#include "i2cmaster.h"
|
||||
#ifdef DEBUG_MATRIX_SCAN_RATE
|
||||
#include "timer.h"
|
||||
|
|
@ -11,7 +11,7 @@ http://imgur.com/a/R0vvs
|
|||
|
||||
to build :
|
||||
|
||||
docker run --rm -e keymap=default -e subproject=v1 -e keyboard=frenchdev --rm -v D:/Repositories/qmk:/qmk:rw edasque/qmk_firmware
|
||||
docker run --rm -e keymap=default -e keyboard=frenchdev --rm -v D:/Repositories/qmk:/qmk:rw edasque/qmk_firmware
|
||||
|
||||
|
||||
The PHYSICAL rows and columns are connected as such :
|
||||
|
|
@ -60,3 +60,5 @@ and on left hand (main) :
|
|||
we use pull up resistor for SCL et VDA, see https://github.com/ErgoDox-EZ/docs/blob/master/ErgoDox%20EZ%20Schematic.pdf for example
|
||||
|
||||
the connector is a standard TRRS (jack with audio + mic)
|
||||
|
||||
Diode direction is row to column
|
||||
|
|
@ -13,26 +13,12 @@
|
|||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file (taken and adapted from the ErgoDox EZ to acomodate custom number of columns)
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
UNICODE_ENABLE ?= yes # Unicode
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
RGBLIGHT_ENABLE = no
|
||||
|
||||
#MCU = at90usb1287
|
||||
# # project specific files
|
||||
SRC = twimaster.c \
|
||||
matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
|
|
@ -48,8 +34,7 @@ MCU = atmega32u4
|
|||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
# for avr upload
|
||||
USB ?= /dev/cu.usbmodem1421
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
|
|
@ -69,6 +54,10 @@ ARCH = AVR8
|
|||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
|
|
@ -77,3 +66,27 @@ F_USB = $(F_CPU)
|
|||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file (taken and adapted from the ErgoDox EZ to acomodate custom number of columns)
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
UNICODE_ENABLE ?= yes # Unicode
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
RGBLIGHT_ENABLE = no
|
||||
API_SYSEX_ENABLE ?= no
|
||||
|
||||
#ifndef QUANTUM_DIR
|
||||
# include ../../../Makefile
|
||||
#endif
|
||||
Loading…
Reference in New Issue