diff --git a/keyboards/lets_split/imgs/letssplitv2.svg b/keyboards/lets_split/imgs/letssplitv2.svg
new file mode 100644
index 000000000..c7bb1db86
--- /dev/null
+++ b/keyboards/lets_split/imgs/letssplitv2.svg
@@ -0,0 +1,5809 @@
+
+
+
+
\ No newline at end of file
diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile
index 57b2ef62e..4e2a6f00f 100644
--- a/keyboards/maxipad/Makefile
+++ b/keyboards/maxipad/Makefile
@@ -1,3 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h
index fc5ab7761..d7a5ef564 100644
--- a/keyboards/maxipad/config.h
+++ b/keyboards/maxipad/config.h
@@ -24,11 +24,10 @@ along with this program. If not, see .
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
-#define MANUFACTURER Wootpatoot
+#define MANUFACTURER wootpatoot
#define PRODUCT maxipad
#define DESCRIPTION A custom keyboard
-
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 6
@@ -55,99 +54,26 @@ along with this program. If not, see .
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
+/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
+/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/maxipad/keymaps/default/Makefile b/keyboards/maxipad/keymaps/default/Makefile
deleted file mode 100644
index f4671a9d1..000000000
--- a/keyboards/maxipad/keymaps/default/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/maxipad/keymaps/default/config.h b/keyboards/maxipad/keymaps/default/config.h
deleted file mode 100644
index df06a2620..000000000
--- a/keyboards/maxipad/keymaps/default/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
\ No newline at end of file
diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c
index 43ace3241..227cef7d8 100644
--- a/keyboards/maxipad/keymaps/default/keymap.c
+++ b/keyboards/maxipad/keymaps/default/keymap.c
@@ -1,5 +1,5 @@
#include "maxipad.h"
-
+
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP( /* Base */
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, \
@@ -13,42 +13,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC \
),
};
-
+
const uint16_t PROGMEM fn_actions[] = {
-
};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
\ No newline at end of file
+};
\ No newline at end of file
diff --git a/keyboards/maxipad/keymaps/default/readme.md b/keyboards/maxipad/keymaps/default/readme.md
deleted file mode 100644
index a6c0d4a3f..000000000
--- a/keyboards/maxipad/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for maxipad
\ No newline at end of file
diff --git a/keyboards/maxipad/maxipad.c b/keyboards/maxipad/maxipad.c
index 879ae86a7..a193b112b 100644
--- a/keyboards/maxipad/maxipad.c
+++ b/keyboards/maxipad/maxipad.c
@@ -1,28 +1 @@
-#include "maxipad.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- led_set_user(usb_led);
-}
+#include "maxipad.h"
\ No newline at end of file
diff --git a/keyboards/maxipad/maxipad.h b/keyboards/maxipad/maxipad.h
index eee1309dd..4d8c6428d 100644
--- a/keyboards/maxipad/maxipad.h
+++ b/keyboards/maxipad/maxipad.h
@@ -8,18 +8,18 @@
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
- k00, k01, k02, k03, k04, k05, \
- k10, k11, k12, k13, k14, k15, \
- k20, k21, k22, k23, k24, k25, \
- k30, k31, k32, k33, k34, k35, \
- k40, k41, k42, k43, k44, k45 \
+ k00, k01, k02, k03, k04, k05, \
+ k10, k11, k12, k13, k14, k15, \
+ k20, k21, k22, k23, k24, k25, \
+ k30, k31, k32, k33, k34, k35, \
+ k40, k41, k42, k43, k44, k45 \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ k30, k31, k32, k33, k34, k35 }, \
- { k40, k41, k42, k43, k44, k45} \
+ { k40, k41, k42, k43, k44, k45 } \
}
#endif
diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md
index de2265d11..861ea2b07 100644
--- a/keyboards/maxipad/readme.md
+++ b/keyboards/maxipad/readme.md
@@ -1,10 +1,10 @@
+Maxipad keyboard firmware
+
## Quantum MK Firmware
-For the full Quantum feature list, see [the parent readme](/).
-
-
-## Building
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile
Change the config.h pinout to match your mcu!!
Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
@@ -17,8 +17,8 @@ To build with the default keymap, simply run `make`.
### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files.
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
@@ -27,4 +27,3 @@ $ make [default|jack|]
```
Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder.
-
diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk
index 56b2042ef..a5c739152 100644
--- a/keyboards/maxipad/rules.mk
+++ b/keyboards/maxipad/rules.mk
@@ -1,3 +1,5 @@
+
+
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
@@ -49,14 +51,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
-# change yes to no to disable
+# comment out to disable the options.
#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+USE_PRO_MICRO ?= yes
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= no # USB Nkey Rollover
@@ -64,4 +73,4 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no # Audio output on port C6
\ No newline at end of file
+AUDIO_ENABLE ?= no # Audio output on port C6