diff --git a/keyboards/at_at/660m/rules.mk b/keyboards/at_at/660m/rules.mk index 245cf23d5..b893d8031 100644 --- a/keyboards/at_at/660m/rules.mk +++ b/keyboards/at_at/660m/rules.mk @@ -1,39 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p df11 -v 0483 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. diff --git a/keyboards/candybar/rules.mk b/keyboards/candybar/rules.mk index a0365a20b..0e1a8517f 100644 --- a/keyboards/candybar/rules.mk +++ b/keyboards/candybar/rules.mk @@ -1,37 +1,5 @@ -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB - -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY - -# Cortex version -MCU = cortex-m0 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. diff --git a/keyboards/cannonkeys/an_c/rules.mk b/keyboards/cannonkeys/an_c/rules.mk index f99075d81..151f72fd0 100644 --- a/keyboards/cannonkeys/an_c/rules.mk +++ b/keyboards/cannonkeys/an_c/rules.mk @@ -1,35 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave - #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/cannonkeys/chimera65/rules.mk b/keyboards/cannonkeys/chimera65/rules.mk index cd6734a31..1e300a99c 100644 --- a/keyboards/cannonkeys/chimera65/rules.mk +++ b/keyboards/cannonkeys/chimera65/rules.mk @@ -1,35 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave - #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk index d1dd3b289..db753884d 100644 --- a/keyboards/cannonkeys/instant60/rules.mk +++ b/keyboards/cannonkeys/instant60/rules.mk @@ -1,39 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. diff --git a/keyboards/cannonkeys/iron165/rules.mk b/keyboards/cannonkeys/iron165/rules.mk index 5480987a3..edc84edd5 100644 --- a/keyboards/cannonkeys/iron165/rules.mk +++ b/keyboards/cannonkeys/iron165/rules.mk @@ -1,35 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p DF11 - BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/cannonkeys/ortho48/rules.mk b/keyboards/cannonkeys/ortho48/rules.mk index 2e483a8c2..4bca8fde0 100644 --- a/keyboards/cannonkeys/ortho48/rules.mk +++ b/keyboards/cannonkeys/ortho48/rules.mk @@ -1,46 +1,18 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c +# MCU name +MCU = STM32F103 # GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = GENERIC_STM32_F103 -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +DFU_ARGS = -d 1eaf:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# project specific files +VPATH += keyboards/cannonkeys/bluepill +SRC = led.c \ + keyboard.c #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/cannonkeys/ortho60/rules.mk b/keyboards/cannonkeys/ortho60/rules.mk index 359f447a9..d2fa535f4 100644 --- a/keyboards/cannonkeys/ortho60/rules.mk +++ b/keyboards/cannonkeys/ortho60/rules.mk @@ -1,46 +1,18 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c +# MCU name +MCU = STM32F103 # GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = GENERIC_STM32_F103 -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +DFU_ARGS = -d 1eaf:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# project specific files +VPATH += keyboards/cannonkeys/bluepill +SRC = led.c \ + keyboard.c #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/cannonkeys/ortho75/rules.mk b/keyboards/cannonkeys/ortho75/rules.mk index 113fff555..5b90e87fd 100644 --- a/keyboards/cannonkeys/ortho75/rules.mk +++ b/keyboards/cannonkeys/ortho75/rules.mk @@ -1,47 +1,18 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c +# MCU name +MCU = STM32F103 # GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = GENERIC_STM32_F103 -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 +DFU_ARGS = -d 1eaf:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -DFU_ARGS = -d 1eaf:0003 -a 2 -R +# project specific files +VPATH += keyboards/cannonkeys/bluepill +SRC = led.c \ + keyboard.c #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/cannonkeys/practice60/rules.mk b/keyboards/cannonkeys/practice60/rules.mk index cf8554c0c..7c3fec31e 100644 --- a/keyboards/cannonkeys/practice60/rules.mk +++ b/keyboards/cannonkeys/practice60/rules.mk @@ -1,46 +1,18 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c +# MCU name +MCU = STM32F103 # GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = GENERIC_STM32_F103 -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +DFU_ARGS = -d 1eaf:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# project specific files +VPATH += keyboards/cannonkeys/bluepill +SRC = led.c \ + keyboard.c #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/cannonkeys/practice65/rules.mk b/keyboards/cannonkeys/practice65/rules.mk index 8bbc910aa..b43e591ae 100644 --- a/keyboards/cannonkeys/practice65/rules.mk +++ b/keyboards/cannonkeys/practice65/rules.mk @@ -1,46 +1,18 @@ -# project specific files -VPATH += keyboards/cannonkeys/bluepill -SRC = led.c \ - keyboard.c +# MCU name +MCU = STM32F103 # GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = GENERIC_STM32_F103 -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +DFU_ARGS = -d 1eaf:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# project specific files +VPATH += keyboards/cannonkeys/bluepill +SRC = led.c \ + keyboard.c #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk index e81448d62..7e0b15b92 100644 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ b/keyboards/cannonkeys/satisfaction75/rules.mk @@ -1,35 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. diff --git a/keyboards/cannonkeys/savage65/rules.mk b/keyboards/cannonkeys/savage65/rules.mk index c6789d6c3..199dd1078 100644 --- a/keyboards/cannonkeys/savage65/rules.mk +++ b/keyboards/cannonkeys/savage65/rules.mk @@ -1,35 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p DF11 - BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/cannonkeys/tmov2/rules.mk b/keyboards/cannonkeys/tmov2/rules.mk index 828fa8ff8..e6f0ce30a 100644 --- a/keyboards/cannonkeys/tmov2/rules.mk +++ b/keyboards/cannonkeys/tmov2/rules.mk @@ -1,43 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -48,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p DF11 - BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/converter/siemens_tastatur/rules.mk b/keyboards/converter/siemens_tastatur/rules.mk index 75b3d7b36..d89f7f5f6 100644 --- a/keyboards/converter/siemens_tastatur/rules.mk +++ b/keyboards/converter/siemens_tastatur/rules.mk @@ -1,43 +1,15 @@ -SRC = matrix.c +# MCU name +MCU = STM32F103 + # GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = GENERIC_STM32_F103 -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 +DFU_ARGS = -d 1eaf:0003 -a2 -R +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -DFU_ARGS = -d 1eaf:0003 -a 2 +SRC = matrix.c #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/handwired/ck4x4/rules.mk b/keyboards/handwired/ck4x4/rules.mk index 7ed9022e6..cd4bc260f 100644 --- a/keyboards/handwired/ck4x4/rules.mk +++ b/keyboards/handwired/ck4x4/rules.mk @@ -1,37 +1,5 @@ -# project specific files -# SRC = matrix.c \ -# led.c - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. diff --git a/keyboards/handwired/onekey/bluepill/rules.mk b/keyboards/handwired/onekey/bluepill/rules.mk index aeda2782b..69436650b 100644 --- a/keyboards/handwired/onekey/bluepill/rules.mk +++ b/keyboards/handwired/onekey/bluepill/rules.mk @@ -1,41 +1,10 @@ -# GENERIC STM32F103C8T6 board - stm32duino bootloader -BOARD = GENERIC_STM32_F103 +# MCU name +MCU = STM32F103 +# GENERIC STM32F103C8T6 board - stm32duino bootloader OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader +BOARD = GENERIC_STM32_F103 DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS ?= -v 1eaf -p 0003 - -# OPT_DEFS = -# MCU_LDSCRIPT = STM32F103x8 -# BOARD = GENERIC_STM32_F103 - -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx -# it should exist either in /os/hal/boards/ -# or /boards -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +DFU_SUFFIX_ARGS = -v 1eaf -p 0003 diff --git a/keyboards/handwired/onekey/stm32f0_disco/rules.mk b/keyboards/handwired/onekey/stm32f0_disco/rules.mk index 69639f940..fe5e3f824 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/rules.mk +++ b/keyboards/handwired/onekey/stm32f0_disco/rules.mk @@ -1,34 +1,2 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p df11 -v 0483 +# MCU name +MCU = STM32F072 diff --git a/keyboards/peiorisboards/ixora/rules.mk b/keyboards/peiorisboards/ixora/rules.mk index 9d89d9663..0cea106d0 100644 --- a/keyboards/peiorisboards/ixora/rules.mk +++ b/keyboards/peiorisboards/ixora/rules.mk @@ -1,38 +1,5 @@ -# project specific files - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F042x6 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = GENERIC_STM32_F042X6 - -# Cortex version -MCU = cortex-m0 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +# MCU name +MCU = STM32F042 # Build Options # comment out to disable the options. diff --git a/keyboards/projectkb/alice/rules.mk b/keyboards/projectkb/alice/rules.mk index 928878335..96904aef3 100644 --- a/keyboards/projectkb/alice/rules.mk +++ b/keyboards/projectkb/alice/rules.mk @@ -1,35 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -51,4 +21,5 @@ CUSTOM_MATRIX = no # Custom matrix file # BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason RGBLIGHT_ENABLE = yes -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +# RAW_ENABLE = yes +# DYNAMIC_KEYMAP_ENABLE = yes diff --git a/keyboards/retro_75/rules.mk b/keyboards/retro_75/rules.mk index 82a2cfb06..d3ead7f64 100644 --- a/keyboards/retro_75/rules.mk +++ b/keyboards/retro_75/rules.mk @@ -1,37 +1,5 @@ -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p df11 -v 0483 +# MCU name +MCU = STM32F072 # Build Options # change yes to no to disable diff --git a/keyboards/vinta/rules.mk b/keyboards/vinta/rules.mk index 90485c435..6d9fc0da1 100644 --- a/keyboards/vinta/rules.mk +++ b/keyboards/vinta/rules.mk @@ -1,39 +1,5 @@ -# project specific files - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F042x6 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = GENERIC_STM32_F042X6 - -# Cortex version -MCU = cortex-m0 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 +# MCU name +MCU = STM32F042 # Build Options # comment out to disable the options.