diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 02339a33f..3152f22be 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -15,6 +15,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#include "config_common.h" + #ifndef CONFIG_H #define CONFIG_H @@ -39,6 +41,13 @@ along with this program. If not, see . #define NO_UART 1 +/* RGB underglow */ +// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. +// The same pin is used on the JJ40, at least. +#define RGBLED_NUM 5 +#define RGB_DI_PIN E2 +#define RGBLIGHT_ANIMATIONS + /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/jj40/jj40.c b/keyboards/jj40/jj40.c index d5add2a6b..6044e83fd 100644 --- a/keyboards/jj40/jj40.c +++ b/keyboards/jj40/jj40.c @@ -22,19 +22,25 @@ along with this program. If not, see . #include "action_layer.h" #include "quantum.h" +#include "i2c.h" + +// custom RGB driver +extern rgblight_config_t rgblight_config; +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i=0; i. { K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 } \ } -#define KEYMAP KEYMAP_OFFSET +#define KEYMAP KEYMAP_MIT #endif diff --git a/keyboards/jj40/keymaps/fun40/rules.mk b/keyboards/jj40/keymaps/fun40/rules.mk index cd2208edd..6fe3b0515 100644 --- a/keyboards/jj40/keymaps/fun40/rules.mk +++ b/keyboards/jj40/keymaps/fun40/rules.mk @@ -11,7 +11,11 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +RGBLIGHT_ENABLE = yes +RGBLIGHT_CUSTOM_DRIVER = yes +DISABLE_WS2812 = yes + SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/jj40/keymaps/krusli/keymap.c b/keyboards/jj40/keymaps/krusli/keymap.c new file mode 100644 index 000000000..59e3988e1 --- /dev/null +++ b/keyboards/jj40/keymaps/krusli/keymap.c @@ -0,0 +1,85 @@ +/* +Copyright 2017 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "jj40.h" +#include "action_layer.h" + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Ctrl | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + _______, KC_LCTL, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,_______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | RGB | RGB | RGB | RGB |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | RGB | RGB | RGB | RGB | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, \ + _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +) +}; diff --git a/keyboards/jj40/keymaps/krusli/readme.md b/keyboards/jj40/keymaps/krusli/readme.md new file mode 100644 index 000000000..75a84d0e6 --- /dev/null +++ b/keyboards/jj40/keymaps/krusli/readme.md @@ -0,0 +1,2 @@ +# krusli +Default JJ40 keymap, adapted with RGB underglow support. GUI and LAlt is also swapped. diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index c6279a2a5..cdc898c0f 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -26,7 +26,7 @@ F_CPU = 12000000 # Bootloader # This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded +# different sizes, comment this out, and the correct address will be loaded # automatically (+60). See bootloader.mk for all options. BOOTLOADER = bootloadHID @@ -37,8 +37,11 @@ EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = no + +RGBLIGHT_ENABLE = yes +RGBLIGHT_CUSTOM_DRIVER = yes +DISABLE_WS2812 = yes # TODO check if this is necessary + KEY_LOCK_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/jj40/usbconfig.h b/keyboards/jj40/usbconfig.h index cae839e74..520d08f61 100644 --- a/keyboards/jj40/usbconfig.h +++ b/keyboards/jj40/usbconfig.h @@ -118,7 +118,8 @@ section at the end of this file). /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 +// max power draw with maxed white underglow measured at 120 mA (peaks) +#define USB_CFG_MAX_BUS_POWER 150 /* Set this variable to the maximum USB bus power consumption of your device. * The value is in milliamperes. [It will be divided by two since USB * communicates power requirements in units of 2 mA.] diff --git a/keyboards/mechmini/config.h b/keyboards/mechmini/config.h index e7004608e..6a4523f85 100644 --- a/keyboards/mechmini/config.h +++ b/keyboards/mechmini/config.h @@ -30,12 +30,15 @@ along with this program. If not, see . #define MATRIX_ROWS 8 #define MATRIX_COLS 15 +#define NO_UART 1 + +/* RGB underglow */ +// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. +// The same pin is used on the JJ40, at least. #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN E2 -#define NO_UART 1 - /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/mechmini/keymaps/default/keymap.c b/keyboards/mechmini/keymaps/default/keymap.c index 5cae1bc81..4a0a4dc0a 100644 --- a/keyboards/mechmini/keymaps/default/keymap.c +++ b/keyboards/mechmini/keymaps/default/keymap.c @@ -14,16 +14,12 @@ along with this program. If not, see . */ #include "mechmini.h" -#include "rgblight.h" #include "quantum.h" -#define MAX_BRIGHTNESS 15 -#define MAX_BRIGHTNESS_IOS 5 // max brightness suitable for iOS devices - -#define _BL 0 -#define _FN1 1 -#define _FN2 2 -#define _FN3 3 +#define _BL 0 // base layer +#define _FN1 1 // function layer 1 +#define _FN2 2 // function layer 2 +#define _FN3 3 // function layer 3 #define _____ KC_TRNS const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -52,109 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _____, _____, _____, _____, _____, _____, _____, _____ ) }; - -/** - * Blank keymap - [0] = KEYMAP( - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____ - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____ - ) - */ - -uint8_t current_level = 4; -int is_on = 0; - -uint8_t r = 0xFF; -uint8_t g = 0xFF; -uint8_t b = 0xFF; - -uint8_t max_brightness = MAX_BRIGHTNESS_IOS; - -enum macro_id { - TOGGLE_RGB, - BRIGHTNESS_DOWN, - BRIGHTNESS_UP, - COLOR_1, - COLOR_2, - COLOR_3, - ENABLE_MAX_BRIGHTNESS -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - keyevent_t event = record->event; - - switch (id) { - case TOGGLE_RGB: - if (event.pressed) { - if (!is_on) { - current_level = 4; - is_on = 1; - } else { - is_on = 0; - } - } - case BRIGHTNESS_DOWN: - if (event.pressed && current_level > 0) { - current_level--; - } - break; - case BRIGHTNESS_UP: - if (event.pressed && current_level < max_brightness) { - current_level++; - } - break; - case COLOR_1: // set to pink - if (event.pressed) { - r = 0xFF; - g = 0x81; - b = 0xC2; - } - break; - case COLOR_2: // set to cyan - if (event.pressed) { - r = 0x00; - g = 0xE0; - b = 0xFF; - } - break; - case COLOR_3: // set to white - if (event.pressed) { - r = 0xFF; - g = 0xFF; - b = 0xFF; - } - break; - case ENABLE_MAX_BRIGHTNESS: // enable all 16 brightness steps - if (event.pressed) { - max_brightness = MAX_BRIGHTNESS; - } - break; - } - - return MACRO_NONE; -} - -const uint16_t fn_actions[] PROGMEM = { -}; - -void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); - -uint8_t dim(uint8_t color, uint8_t opacity) { - return ((uint16_t) color * opacity / 0xFF) & 0xFF; -} - -void user_setrgb(uint8_t r, uint8_t g, uint8_t b) { - uint8_t alpha = current_level * 0x11; - rgblight_setrgb(dim(r, alpha), dim(g, alpha), dim(b, alpha)); -} - -void matrix_scan_user(void) { - if (!is_on) { - current_level = 0; - user_setrgb(r, g, b); - } else { - user_setrgb(r, g, b); - } -} diff --git a/keyboards/mechmini/mechmini.c b/keyboards/mechmini/mechmini.c index baa2e0357..9897da099 100644 --- a/keyboards/mechmini/mechmini.c +++ b/keyboards/mechmini/mechmini.c @@ -16,16 +16,16 @@ along with this program. If not, see . */ #include "mechmini.h" -#include "rgblight.h" - #include #include "action_layer.h" #include "i2c.h" #include "quantum.h" -extern rgblight_config_t rgblight_config; +#include "rgblight.h" +// custom RGB driver +extern rgblight_config_t rgblight_config; void rgblight_set(void) { if (!rgblight_config.enable) { for (uint8_t i = 0; i < RGBLED_NUM; i++) { @@ -42,4 +42,5 @@ void rgblight_set(void) { __attribute__ ((weak)) void matrix_scan_user(void) { rgblight_task(); + /* add other tasks to be done on each matrix scan */ } diff --git a/keyboards/mechmini/usbconfig.h b/keyboards/mechmini/usbconfig.h index b6b8cdbbb..d2d848fcd 100644 --- a/keyboards/mechmini/usbconfig.h +++ b/keyboards/mechmini/usbconfig.h @@ -118,7 +118,7 @@ section at the end of this file). /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 100 +#define USB_CFG_MAX_BUS_POWER 500 /* Set this variable to the maximum USB bus power consumption of your device. * The value is in milliamperes. [It will be divided by two since USB * communicates power requirements in units of 2 mA.]