diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index e658b48b71..82110537a9 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -6,51 +6,51 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/String Required * A free-form text string describing the keyboard. This will be used as the USB product string. Can include Unicode characters, escaped to ASCII eg. `\u03A8` (Ψ). * Example: `"Clueboard 66%"` -* `maintainer` (Required) +* `maintainer` String Required * GitHub username of the maintainer, or `qmk` for community maintained boards. * Example: `"skullydazed"` -* `manufacturer` (Required) +* `manufacturer` String Required * A free-form text string describing the keyboard's manufacturer. This will be used as the USB manufacturer string. Can include Unicode characters, escaped to ASCII eg. `\u03A8` (Ψ). * Example: `"Clueboard"` -* `url` (Required) +* `url` String Required * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard. * Example: `"https://clueboard.co"` -* `bootloader_instructions` +* `bootloader_instructions` String * Instructions for putting the keyboard into a mode that allows for firmware flashing. * Example: `"Press the button marked RESET on the back of the PCB"` -* `tags` +* `tags` Array: String * A list of tags describing the keyboard. * Example: `["ortho", "split", "rgb"]` ## Hardware Configuration {#hardware-configuration} -* `board` +* `board` String * Override the default ChibiOS board name (ARM-based keyboards only). * Example: `"BLACKPILL_STM32_F411"` -* `bootloader` +* `bootloader` String * The bootloader in use on the keyboard. Required if `development_board` is not specified. -* `development_board` +* `development_board` String * The microcontroller development board, if applicable. * Example: `"promicro"` -* `pin_compatible` +* `pin_compatible` String * The form factor of the development board, if applicable. Must be one of `elite_c`, `promicro`. -* `processor` +* `processor` String * The microcontroller in use on the keyboard. Required if `development_board` is not specified. ## Firmware Configuration {#firmware-configuration} * `build` - * `debounce_type` + * `debounce_type`String * The debounce algorithm to use. Must be one of `asym_eager_defer_pk`, `custom`, `sym_defer_g`, `sym_defer_pk`, `sym_defer_pr`, `sym_eager_pk`, `sym_eager_pr`. - * `firmware_format` + * `firmware_format`String * The format of the final output binary. Must be one of `bin`, `hex`, `uf2`. - * `lto` + * `lto`Boolean * Enable Link-Time Optimization. * Default: `false` -* `features` +* `features`Object: Boolean * A dictionary of features to enable or disable. * Example: ```json @@ -61,36 +61,36 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/Boolean * Enable locking switch support. * Default: `false` - * `resync` + * `resync` Boolean * Keep switch state consistent with keyboard LED state. * Default: `false` - * `tap_capslock_delay` + * `tap_capslock_delay` Number * The delay between keydown and keyup for Caps Lock tap events in milliseconds. * Default: `80` (80 ms) - * `tap_keycode_delay` + * `tap_keycode_delay` Number * The delay between keydown and keyup for tap events in milliseconds. * Default: `0` (no delay) * `tapping` - * `hold_on_other_key_press` + * `hold_on_other_key_press` Boolean * Default: `false` - * `hold_on_other_key_press_per_key` + * `hold_on_other_key_press_per_key` Boolean * Default: `false` - * `permissive_hold` + * `permissive_hold` Boolean * Default: `false` - * `permissive_hold_per_key` + * `permissive_hold_per_key` Boolean * Default: `false` - * `retro` + * `retro` Boolean * Default: `false` - * `retro_per_key` + * `retro_per_key` Boolean * Default: `false` - * `term` + * `term` Number * Default: `200` (200 ms) - * `term_per_key` + * `term_per_key` Boolean * Default: `false` - * `toggle` + * `toggle` Number * Default: `5` ## APA102 {#apa102} @@ -98,11 +98,11 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/Pin Required * The GPIO pin connected to `CI` on the first LED in the chain. - * `data_pin` (Required) + * `data_pin` Pin Required * The GPIO pin connected to `DI` on the first LED in the chain. - * `default_brightness` + * `default_brightness` Number * The initial global brightness level (independent of the RGB data), from 0 to 31. * Default: `31` @@ -112,26 +112,26 @@ Configures the [Audio](features/audio) feature. * `audio` * `default` - * `on` + * `on` Boolean * The default audio enabled state. * Default: `true` - * `clicky` + * `clicky` Boolean * The default audio clicky enabled state. * Default: `true` - * `driver` + * `driver` String * The driver to use. Must be one of `dac_additive`, `dac_basic`, `pwm_software`, `pwm_hardware`. - * `macro_beep` + * `macro_beep` Boolean * Play a short beep for `\a` (ASCII `BEL`) characters in Send String macros. * Default: `false` - * `pins` (Required) + * `pins` Array: Pin Required * The GPIO pin(s) connected to the speaker(s). * `power_control` - * `on_state` + * `on_state` 0|1 * The logical GPIO state required to turn the speaker on. * Default: `1` (on = high) - * `pin` + * `pin` Pin * The GPIO pin connected to speaker power circuit. - * `voices` + * `voices` Boolean * Use multiple audio voices. * Default: `false` @@ -141,40 +141,40 @@ Configures the [Audio](features/audio) feature. Configures the [Backlight](features/backlight) feature. * `backlight` - * `as_caps_lock` + * `as_caps_lock` Boolean * Use the backlight as a Caps Lock indicator. * Default: `false` - * `breathing` + * `breathing` Boolean * Whether backlight breathing is enabled. * Default: `false` - * `breathing_period` + * `breathing_period` Number * The length of one backlight breathing cycle in seconds. * Default: `6` (6 seconds) * `default` - * `on` + * `on` Boolean * The default backlight enabled state. * Default: `true` - * `breathing` + * `breathing` Boolean * The default backlight breathing state. * Default: `false` - * `brightness` + * `brightness` Number * The default brightness level. * Default: `max_brightness` - * `driver` + * `driver` String * The driver to use. Must be one of `custom`, `pwm`, `software`, `timer`. * Default: `"pwm"` - * `levels` + * `levels` Number * The number of brightness levels (excluding off), from 1 to 31. * Default: `3` - * `max_brightness` + * `max_brightness` Number * The maximum PWM value which brightness is scaled to, from 0 to 255. * Default: `255` - * `on_state` + * `on_state` 0|1 * The logical GPIO state required to turn the LEDs on. * Default: `1` (on = high) - * `pin` + * `pin` Pin * The GPIO pin connected to the backlight circuit. - * `pins` + * `pins` Array: Pin * A list of GPIO pins connected to the backlight LEDs (`software` and `timer` drivers only). ## Bluetooth {#bluetooth} @@ -182,7 +182,7 @@ Configures the [Backlight](features/backlight) feature. Configures the [Bluetooth](features/bluetooth) feature. * `bluetooth` - * `driver` + * `driver` String * The driver to use. Must be one of `custom`, `bluefruit_le`, `rn42`. ## Bootmagic {#bootmagic} @@ -190,10 +190,10 @@ Configures the [Bluetooth](features/bluetooth) feature. Configures the [Bootmagic](features/bootmagic) feature. * `bootmagic` - * `enabled` + * `enabled` Boolean * Enables the Bootmagic feature. * Default: `false` - * `matrix` + * `matrix` Matrix * The matrix position of the key to check during startup. This should generally be set to the (physically) top left key. * Default: `[0, 0]` @@ -202,19 +202,19 @@ Configures the [Bootmagic](features/bootmagic) feature. Configures the [Caps Word](features/caps_word) feature. * `caps_word` - * `both_shifts_turns_on` + * `both_shifts_turns_on` Boolean * Activate Caps Word by pressing both Shift keys. * Default: `false` - * `double_tap_shift_turns_on` + * `double_tap_shift_turns_on` Boolean * Activate Caps Word by pressing Left Shift twice. * Default: `false` - * `enabled` + * `enabled` Boolean * Enables the Caps Word feature. * Default: `false` - * `idle_timeout` + * `idle_timeout` Number * The amount of time before Caps Word automatically deactivates in milliseconds. * Default: `5000` (5 seconds) - * `invert_on_shift` + * `invert_on_shift` Boolean * Invert shift state instead of deactivating Caps Word when Shift is pressed. * Default: `false` @@ -223,7 +223,7 @@ Configures the [Caps Word](features/caps_word) feature. Configures the [Combo](features/combo) feature. * `combo` - * `term` + * `term` Number * The amount of time to recognize a combo in milliseconds. * Default: `50` (50 ms) @@ -232,12 +232,12 @@ Configures the [Combo](features/combo) feature. Configures the [DIP Switches](features/dip_switch) feature. * `dip_switch` - * `enabled` + * `enabled` Boolean * Enable the DIP Switches feature. * Default: `false` - * `pins` + * `pins` Array: Pin * A list of GPIO pins connected to the MCU. - * `matrix_grid` + * `matrix_grid` Array: Matrix * A list of matrix locations in the key matrix. * Example: `[ [0,6], [1,6], [2,6] ]` @@ -246,15 +246,15 @@ Configures the [DIP Switches](features/dip_switch) feature. Configures the [EEPROM](drivers/eeprom) driver. * `eeprom` - * `driver` + * `driver` String * The EEPROM backend to use. Must be one of `custom`, `i2c`, `legacy_stm32_flash`, `spi`, `transient`, `vendor`, `wear_leveling`. * Default: `"vendor"` * `wear_leveling` - * `driver` + * `driver` String * The driver to use. Must be one of `embedded_flash`, `legacy`, `rp2040_flash`, `spi_flash`, `custom`. - * `backing_size` + * `backing_size` Number * Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size. - * `logical_size` + * `logical_size` Number * Number of bytes “exposed” to the rest of QMK and denotes the size of the usable EEPROM. ## Encoder {#encoder} @@ -262,13 +262,13 @@ Configures the [EEPROM](drivers/eeprom) driver. Configures the [Encoder](features/encoders) feature. * `encoder` - * `rotary` + * `rotary` Array: Object * A list of encoder objects. - * `pin_a` (Required) + * `pin_a` Pin Required * The GPIO pin connected to the encoder's `A` pin. - * `pin_b` (Required) + * `pin_b` Pin Required * The GPIO pin connected to the encoder's `B` pin. - * `resolution` + * `resolution` Number * The number of edge transitions on both pins required to register an input. * Default: `4` @@ -277,18 +277,18 @@ Configures the [Encoder](features/encoders) feature. Configures the [LED Indicators](features/led_indicators) feature. * `indicators` - * `caps_lock` + * `caps_lock` Pin * The GPIO pin connected to the Caps Lock LED. - * `compose` + * `compose` Pin * The GPIO pin connected to the Compose LED. - * `kana` + * `kana` Pin * The GPIO pin connected to the Kana LED. - * `num_lock` + * `num_lock` Pin * The GPIO pin connected to the Num Lock LED. - * `on_state` + * `on_state` 0|1 * The logical GPIO state required to turn the LEDs on. * Default: `1` (on = high) - * `scroll_lock` + * `scroll_lock` Pin * The GPIO pin connected to the Scroll Lock LED. ## Layouts {#layouts} @@ -301,10 +301,10 @@ All key positions and rotations are specified in relation to the top-left corner The ISO enter key is represented by a 1.25u×2uh key. Renderers which utilize info.json layout data (such as `qmk info -l` and the QMK Configurator) should display this key as expected. -* `community_layouts` +* `community_layouts` Array: String * A list of community layouts supported by the keyboard. * Example: `["60_ansi", "60_iso"]` -* `layout_aliases` +* `layout_aliases` Object: String * A mapping of layout aliases to layout definitions. * Example: ```json @@ -313,34 +313,34 @@ The ISO enter key is represented by a 1.25u×2uh key. Renderers which utilize in "LAYOUT_iso": "LAYOUT_60_iso" } ``` -* `layouts` +* `layouts` Object * A dictionary of layouts supported by the keyboard. - * `LAYOUT_` - * `layout` + * `LAYOUT_` Object + * `layout` Array: Object * A list of key dictionaries comprising the layout. Each key dictionary contains: - * `matrix` (Required) + * `matrix` Matrix Required * The matrix position for the key. * Example: `[0, 4]` (row 0, column 4) - * `x` (Required) + * `x` KeyUnit Required * The absolute position of the key in the horizontal axis, in key units. - * `y` (Required) + * `y` KeyUnit Required * The absolute position of the key in the vertical axis, in key units. - * `h` + * `h` KeyUnit * The height of the key, in key units. * Default: `1` (1u) - * `label` + * `label` String * What to name the key. This is *not* a key assignment as in the keymap, but should usually correspond to the keycode for the first layer of the default keymap. * Example: `"Escape"` - * `r` + * `r` Number * The rotation angle in degrees. Currently not implemented. - * `rx` + * `rx` Number * The absolute X position of the rotation axis. Currently not implemented. - * `ry` + * `ry` Number * The absolute Y position of the rotation axis. Currently not implemented. - * `w` + * `w` KeyUnit * The width of the key, in key units. * Default: `1` (1u) - * `encoder` + * `encoder` Number * The index of an encoder this key should be linked to * Example: `{"label": "Shift", "matrix": [4, 0], "x": 0, "y": 4.25, "w": 2.25}` @@ -349,13 +349,13 @@ The ISO enter key is represented by a 1.25u×2uh key. Renderers which utilize in Configures the [Leader Key](features/leader_key) feature. * `leader_key` - * `timing` + * `timing` Boolean * Reset the `timeout` on each keypress. * Default: `false` - * `strict_processing` + * `strict_processing` Boolean * Do not extract the tap keycodes from Layer-Tap and Mod-Tap key events. * Default: `false` - * `timeout` + * `timeout` Number * The amount of time to complete a leader sequence in milliseconds. * Default: `300` (300 ms) @@ -364,7 +364,7 @@ Configures the [Leader Key](features/leader_key) feature. Configures the [LED Matrix](features/led_matrix) feature. * `led_matrix` - * `animations` + * `animations` Object: Boolean * A dictionary of effects to enable or disable. Effects which are absent default to `false`. * Example: ```json @@ -374,82 +374,82 @@ Configures the [LED Matrix](features/led_matrix) feature. "cycle_left_right": false } ``` - * `center_point` + * `center_point` Array: Number * The centroid (geometric center) of the LEDs. Used for certain effects. * Default: `[112, 32]` * `default` - * `animation` + * `animation` String * The default effect. Must be one of `led_matrix.animations` * Default: `"solid"` - * `on` + * `on` Boolean * The default enabled state. * Default: `true` - * `val` + * `val` Number * The default brightness level. * Default: `max_brightness` - * `speed` + * `speed` Number * The default animation speed. * Default: `128` - * `driver` (Required) + * `driver` String Required * The driver to use. Must be one of `custom`, `is31fl3218`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`. - * `layout` (Required) + * `layout` Array: Object Required * List of LED configuration dictionaries. Each dictionary contains: - * `flags` (Required) + * `flags` Number Required * A bitfield of flags describing the type of LED. - * `x` (Required) + * `x` Number Required * The position of the LED in the horizontal axis, from 0 to 224. - * `y` (Required) + * `y` Number Required * The position of the LED in the vertical axis, from 0 to 64. - * `matrix` + * `matrix` Matrix * The key matrix position associated with the LED. * Example: `[0, 2]` * Example: `{"matrix": [2, 1], "x": 20, "y": 48, "flags": 2}` - * `led_flush_limit` + * `led_flush_limit` Number * Limits in milliseconds how frequently an animation will update the LEDs. * Default: `16` - * `led_process_limit` + * `led_process_limit` Number * Limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness). * Default: `led_count / 5` - * `max_brightness` + * `max_brightness` Number * The maximum value which brightness is scaled to, from 0 to 255. * Default: `255` - * `react_on_keyup` + * `react_on_keyup` Boolean * Animations react to keyup instead of keydown. * Default: `false` - * `sleep` + * `sleep` Boolean * Turn off the LEDs when the host goes to sleep. * Default: `false` - * `speed_steps` + * `speed_steps` Number * The number of speed adjustment steps. * Default: `16` - * `split_count` + * `split_count` Array: Number * For split keyboards, the number of LEDs on each half. * Example: `[16, 16]` - * `timeout` + * `timeout` Number * The LED activity timeout in milliseconds. * Default: `0` (no timeout) - * `val_steps` + * `val_steps` Number * The number of brightness adjustment steps. * Default: `8` ## Matrix {#matrix} -* `debounce` +* `debounce` Number * The debounce time in milliseconds. * Default: `5` (5 ms) -* `diode_direction` +* `diode_direction` String * Which way the diodes are "pointing". Unused for `matrix_pins.direct`. Must be one of `COL2ROW`, `ROW2COL`. * `matrix_pins` - * `cols` + * `cols` Array: Pin * A list of GPIO pins connected to the matrix columns. * Example: `["A0", "A1", "A2"]` - * `custom` + * `custom` Boolean * Whether to use a custom matrix scanning implementation. * Default: `false` - * `custom_lite` + * `custom_lite` Boolean * Whether to use a "lite" custom matrix scanning implementation. * Default: `false` - * `direct` + * `direct` Array: Array: Pin * A 2-dimensional list of GPIO pins connected to each keyswitch, forming the "matrix" rows and columns. * Example: ```json @@ -459,16 +459,16 @@ Configures the [LED Matrix](features/led_matrix) feature. ["C0", "C1", "C2"] ] ``` - * `ghost` + * `ghost` Boolean * Whether the matrix has no anti-ghosting diodes. * Default: `false` - * `input_pressed_state` + * `input_pressed_state` 0|1 * The logical GPIO state of the input pins when a key is pressed. * Default: `0` (pressed = low) - * `io_delay` + * `io_delay` Number * The amount of time to wait between row/col selection and col/row pin reading, in microseconds. * Default: `30` (30 µs) - * `rows` + * `rows` Array: Pin * A list of GPIO pins connected to the matrix rows. * Example: `["B0", "B1", "B2"]` @@ -477,23 +477,23 @@ Configures the [LED Matrix](features/led_matrix) feature. Configures the [Mouse Keys](features/mouse_keys) feature. * `mouse_key` - * `delay` - * `enabled` + * `delay` Number + * `enabled` Boolean * Enables the Mouse Keys feature. * Default: `false` - * `interval` - * `max_speed` - * `time_to_max` - * `wheel_delay` + * `interval` Number + * `max_speed` Number + * `time_to_max` Number + * `wheel_delay` Number ## One Shot {#one-shot} Configures [One Shot keys](one_shot_keys). * `oneshot` - * `tap_toggle` + * `tap_toggle` Number * The number of times to tap the key in order to hold it. - * `timeout` + * `timeout` Number * The amount of time before the key is released in milliseconds. ## PS/2 {#ps2} @@ -501,30 +501,30 @@ Configures [One Shot keys](one_shot_keys). Configures the [PS/2](features/ps2_mouse) feature. * `ps2` - * `clock_pin` + * `clock_pin` Pin * The GPIO pin connected to `CLK` on the PS/2 device. - * `data_pin` + * `data_pin` Pin * The GPIO pin connected to `DATA` on the PS/2 device. - * `driver` + * `driver` String * The PS/2 driver to use. Must be one of `busywait`, `interrupt`, `usart`, `vendor`. * Default: `"busywait"` - * `enabled` + * `enabled` Boolean * Enable the PS/2 feature. * Default: `false` - * `mouse_enabled` + * `mouse_enabled` Boolean * Enable the PS/2 mouse handling. * Default: `false` ## QMK LUFA Bootloader {#qmk-lufa-bootloader} * `qmk_lufa_bootloader` - * `esc_input` (Required) + * `esc_input` Pin Required * The GPIO pin connected to the designated "exit bootloader" key's row (if `COL2ROW`). - * `esc_output` (Required) + * `esc_output` Pin Required * The GPIO pin connected to the designated "exit bootloader" key's column (if `COL2ROW`). - * `led` + * `led` Pin * The GPIO pin connected to an LED to flash. - * `speaker` + * `speaker` Pin * The GPIO pin connected to a speaker to click (can also be used for a second LED). ## RGBLight {#rgblight} @@ -532,9 +532,9 @@ Configures the [PS/2](features/ps2_mouse) feature. Configures the [RGB Lighting](features/rgblight) feature. * `rgblight` - * `led_count` (Required) + * `led_count` Number Required * The number of LEDs in the chain. - * `animations` + * `animations` Object: Boolean * A dictionary of effects to enable or disable. Effects which are absent default to `false`. * Example: ```json @@ -544,60 +544,60 @@ Configures the [RGB Lighting](features/rgblight) feature. "snake": false } ``` - * `brightness_steps` + * `brightness_steps` Number * The number of brightness adjustment steps. * Default: `17` * `default` - * `animation` + * `animation` String * The default effect. Must be one of `rgblight.animations` * Default: `"static_light"` - * `on` + * `on` Boolean * The default enabled state. * Default: `true` - * `hue` + * `hue` Number * The default hue value. * Default: `0` - * `sat` + * `sat` Number * The default saturation value. * Default: `255` - * `val` + * `val` Number * The default brightness level. * Default: `max_brightness` - * `speed` + * `speed` Number * The default animation speed. * Default: `0` - * `driver` + * `driver` String * The driver to use. Must be one of `apa102`, `custom`, `ws2812`. * Default: `"ws2812"` - * `hue_steps` + * `hue_steps` Number * The number of hue adjustment steps. * Default: `8` * `layers` - * `blink` + * `blink` Boolean * Enable layer blinking API. * Default: `false` - * `enabled` + * `enabled` Boolean * Enable RGB Lighting Layers. * Default: `false` - * `max` + * `max` Number * The maximum layer count, from 1 to 32. * Default: `8` - * `led_map` + * `led_map` Array: Number * Remap LED indices. * Example: `[4, 3, 2, 1, 0]` - * `max_brightness` + * `max_brightness` Number * The maximum value which the HSV "V" component is scaled to, from 0 to 255. * Default: `255` - * `saturation_steps` + * `saturation_steps` Number * The number of saturation adjustment steps. * Default: `17` - * `sleep` + * `sleep` Boolean * Turn off the LEDs when the host goes to sleep. * Default: `false` - * `split` + * `split` Boolean * Enable synchronization between split halves. * Default: `false` - * `split_count` + * `split_count` Array: Number * When `rgblight.split` is enabled, the number of LEDs on each half. * Example: `[10, 10]` @@ -606,7 +606,7 @@ Configures the [RGB Lighting](features/rgblight) feature. Configures the [RGB Matrix](features/rgb_matrix) feature. * `rgb_matrix` - * `animations` + * `animations` Object: Boolean * A dictionary of effects to enable or disable. Effects which are absent default to `false`. * Example: ```json @@ -616,73 +616,73 @@ Configures the [RGB Matrix](features/rgb_matrix) feature. "cycle_left_right": false } ``` - * `center_point` + * `center_point` Array: Number * The centroid (geometric center) of the LEDs. Used for certain effects. * Default: `[112, 32]` * `default` - * `animation` + * `animation` String * The default effect. Must be one of `rgb_matrix.animations` * Default: `"solid_color"` - * `on` + * `on` Boolean * The default enabled state. * Default: `true` - * `hue` + * `hue` Number * The default hue value. * Default: `0` - * `sat` + * `sat` Number * The default saturation value. * Default: `255` - * `val` + * `val` Number * The default brightness level. * Default: `max_brightness` - * `speed` + * `speed` Number * The default animation speed. * Default: `128` - * `driver` (Required) + * `driver` String Required * The driver to use. Must be one of `aw20216s`, `custom`, `is31fl3218`, `is31fl3236`, `is31fl3729`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`, `ws2812`. - * `hue_steps` + * `hue_steps` Number * The number of hue adjustment steps. * Default: `8` - * `layout` (Required) + * `layout` Array: Object Required * List of LED configuration dictionaries. Each dictionary contains: - * `flags` (Required) + * `flags` Number Required * A bitfield of flags describing the type of LED. - * `x` (Required) + * `x` Number Required * The position of the LED in the horizontal axis, from 0 to 224. - * `y` (Required) + * `y` Number Required * The position of the LED in the vertical axis, from 0 to 64. - * `matrix` + * `matrix` Matrix * The key matrix position associated with the LED. * Example: `[0, 2]` * Example: `{"matrix": [2, 1], "x": 20, "y": 48, "flags": 2}` - * `led_flush_limit` + * `led_flush_limit` Number * Limits in milliseconds how frequently an animation will update the LEDs. * Default: `16` - * `led_process_limit` + * `led_process_limit` Number * Limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness). * Default: `led_count / 5` - * `max_brightness` + * `max_brightness` Number * The maximum value which the HSV "V" component is scaled to, from 0 to 255. * Default: `255` - * `react_on_keyup` + * `react_on_keyup` Boolean * Animations react to keyup instead of keydown. * Default: `false` - * `sat_steps` + * `sat_steps` Number * The number of saturation adjustment steps. * Default: `16` - * `sleep` + * `sleep` Boolean * Turn off the LEDs when the host goes to sleep. * Default: `false` - * `speed_steps` + * `speed_steps` Number * The number of speed adjustment steps. * Default: `16` - * `split_count` + * `split_count` Array: Number * For split keyboards, the number of LEDs on each half. * Example: `[16, 16]` - * `timeout` + * `timeout` Number * The LED activity timeout in milliseconds. * Default: `0` (no timeout) - * `val_steps` + * `val_steps` Number * The number of brightness adjustment steps. * Default: `16` @@ -691,16 +691,16 @@ Configures the [RGB Matrix](features/rgb_matrix) feature. Configures the [Secure](features/secure) feature. * `secure` - * `enabled` + * `enabled` Boolean * Enable the Secure feature. * Default: `false` - * `idle_timeout` + * `idle_timeout` Number * Timeout while unlocked before returning to the locked state. Set to `0` to disable. * Default: `60000` (1 minute) - * `unlock_sequence` + * `unlock_sequence` Array: Matrix * A list of up to five matrix locations comprising the "unlock sequence". * Example: `[[0, 0], [0, 1], [4, 3]]` - * `unlock_timeout` + * `unlock_timeout` Number * Timeout for the user to perform the unlock sequence. Set to `0` to disable. * Default: `5000` (5 seconds) @@ -716,7 +716,7 @@ Configures the [Split Keyboard](features/split_keyboard) feature. * `right` * `pins` * See [DIP Switches](#dip-switch) config. - * `enabled` + * `enabled` Boolean * Enable the Split Keyboard feature. * Default: `false` * `encoder` @@ -724,69 +724,69 @@ Configures the [Split Keyboard](features/split_keyboard) feature. * `rotary` * See [Encoder](#encoder) config. * `handedness` - * `pin` + * `pin` Pin * The GPIO pin connected to determine handedness. - * `matrix_grid` + * `matrix_grid` Array: Pin * The GPIO pins of the matrix position which determines the handedness. * Example: `["A1", "B5"]` * `matrix_pins` * `right` * See [Matrix](#matrix) config. * `serial` - * `driver` + * `driver` String * The driver to use. Must be one of `bitbang`, `usart`, `vendor`. * Default: `"bitbang"` - * `pin` + * `pin` Pin * The GPIO pin to use for transmit and receive. - * `soft_serial_speed` + * `soft_serial_speed` Number * The protocol speed, from `0` to `5` (`serial` transport protocol only). * Default: `1` * `transport` - * `protocol` + * `protocol` String * The split transport protocol to use. Must be one of `custom`, `i2c`, `serial`. * `sync` - * `activity` + * `activity` Boolean * Mirror the activity timestamps to the secondary half. * Default: `false` - * `detected_os` + * `detected_os` Boolean * Mirror the [detected OS](features/os_detection) to the secondary half. * Default: `false` - * `haptic` + * `haptic` Boolean * Mirror the haptic state and process haptic feedback to the secondary half. * Default: `false` - * `layer_state` + * `layer_state` Boolean * Mirror the layer state to the secondary half. * Default: `false` - * `indicators` + * `indicators` Boolean * Mirror the indicator state to the secondary half. * Default: `false` - * `matrix_state` + * `matrix_state` Boolean * Mirror the main/primary half's matrix state to the secondary half. * Default: `false` - * `modifiers` + * `modifiers` Boolean * Mirror the modifier state to the secondary half. * Default: `false` - * `oled` + * `oled` Boolean * Mirror the OLED on/off status to the secondary half. * Default: `false` - * `st7565` + * `st7565` Boolean * Mirror the ST7565 on/off status to the secondary half. * Default: `false` - * `wpm` + * `wpm` Boolean * Mirror the current WPM value to the secondary half. * Default: `false` - * `watchdog` + * `watchdog` Boolean * Reboot the secondary half if it loses connection. * Default: `false` - * `watchdog_timeout` + * `watchdog_timeout` Number * The amount of time to wait for communication from the primary half in milliseconds. * `usb_detect` - * `enabled` + * `enabled` Boolean * Detect USB connection when determining split half roles. - * `polling_interval` + * `polling_interval` Number * The polling frequency in milliseconds. * Default: `10` (10 ms) - * `timeout` + * `timeout` Number * The amount of time to wait for a USB connection in milliseconds. * Default: `2000` (2 seconds) @@ -795,48 +795,48 @@ Configures the [Split Keyboard](features/split_keyboard) feature. Configures the [Stenography](features/stenography) feature. * `stenography` - * `enabled` + * `enabled` Boolean * Enable the Stenography feature. * Default: `false` - * `protocol` + * `protocol` String * The Steno protocol to use. Must be one of `all`, `geminipr`, `txbolt`. * Default: `"all"` ## USB {#usb} * `usb` - * `device_version` (Required) + * `device_version` String Required * A BCD version number in the format `MM.m.r` (up to `99.9.9`). * Example: `"1.0.0"` - * `pid` (Required) + * `pid` String Required * The USB product ID as a four-digit hexadecimal number. * Example: `"0x23B0"` - * `vid` (Required) + * `vid` String Required * The USB vendor ID as a four-digit hexadecimal number. * Example: `"0xC1ED"` - * `force_nkro` + * `force_nkro` Boolean * Force NKRO to be active. * Default: `false` - * `max_power` + * `max_power` Number * The maximum current draw the host should expect from the device. This does not control the actual current usage. * Default: `500` (500 mA) - * `no_startup_check` + * `no_startup_check` Boolean * Disable USB suspend check after keyboard startup. * Default: `false` - * `polling_interval` + * `polling_interval` Number * The frequency at which the host should poll the keyboard for reports. * Default: `1` (1 ms/1000 Hz) * `shared_endpoint` - * `keyboard` + * `keyboard` Boolean * Send keyboard reports through the "shared" USB endpoint. * Default: `false` - * `mouse` + * `mouse` Boolean * Send mouse reports through the "shared" USB endpoint. * Default: `true` - * `suspend_wakeup_delay` + * `suspend_wakeup_delay` Number * The amount of time to wait after sending a wakeup packet, in milliseconds. * Default: `0` (disabled) - * `wait_for_enumeration` + * `wait_for_enumeration` Boolean * Force the keyboard to wait for USB enumeration before starting up. * Default: `false` @@ -845,17 +845,17 @@ Configures the [Stenography](features/stenography) feature. Configures the [WS2812](drivers/ws2812) driver. * `ws2812` - * `driver` + * `driver` String * The driver to use. Must be one of `bitbang`, `custom`, `i2c`, `pwm`, `spi`, `vendor`. * Default: `"bitbang"` - * `pin` (Required) + * `pin` Pin Required * The GPIO pin connected to `DI` on the first LED in the chain (`bitbang`, `pwm`, `spi` and `vendor` drivers only). - * `i2c_address` + * `i2c_address` String * The I²C address of the WS2812 controller (`i2c` driver only). * Default: `"0xB0"` - * `i2c_timeout` + * `i2c_timeout` Number * The I²C timeout in milliseconds (`i2c` driver only). * Default: `100` (100 ms) - * `rgbw` + * `rgbw` Boolean * Enable RGBW LEDs. * Default: `false`