/* Copyright 2018 Massdrop Inc. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _LED_MATRIX_H_ #define _LED_MATRIX_H_ #include "quantum.h" //From keyboard #include "config_led.h" //CS1-CS16 Current Source "Col" #define ISSI3733_CS_COUNT 16 //SW1-SW12 Switch "Row" #define ISSI3733_SW_COUNT 12 #define ISSI3733_LED_RGB_COUNT ISSI3733_CS_COUNT * ISSI3733_SW_COUNT #define ISSI3733_PG0_BYTES ISSI3733_LED_RGB_COUNT / 8 + 1 //+1 for first byte being memory start offset for I2C transfer #define ISSI3733_PG1_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer #define ISSI3733_PG2_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer #define ISSI3733_PG3_BYTES 18 + 1 //+1 for first byte being memory start offset for I2C transfer #define ISSI3733_PG_ONOFF_BYTES ISSI3733_PG0_BYTES #define ISSI3733_PG_OR_BYTES ISSI3733_PG0_BYTES #define ISSI3733_PG_SR_BYTES ISSI3733_PG0_BYTES #define ISSI3733_PG_PWM_BYTES ISSI3733_PG1_BYTES #define ISSI3733_PG_ABM_BYTES ISSI3733_PG2_BYTES #define ISSI3733_PG_FN_BYTES ISSI3733_PG3_BYTES typedef struct issi3733_driver_s { uint8_t addr; //Address of the driver according to wiring "ISSI3733: Table 1 Slave Address" uint8_t onoff[ISSI3733_PG_ONOFF_BYTES]; //PG0 - LED Control Register - LED On/Off Register uint8_t open[ISSI3733_PG_OR_BYTES]; //PG0 - LED Control Register - LED Open Register uint8_t shrt[ISSI3733_PG_SR_BYTES]; //PG0 - LED Control Register - LED Short Register uint8_t pwm[ISSI3733_PG_PWM_BYTES]; //PG1 - PWM Register uint8_t abm[ISSI3733_PG_ABM_BYTES]; //PG2 - Auto Breath Mode Register uint8_t conf[ISSI3733_PG_FN_BYTES]; //PG3 - Function Register } issi3733_driver_t; typedef struct issi3733_rgb_s { uint8_t *r; //Direct access into PWM data uint8_t *g; //Direct access into PWM data uint8_t *b; //Direct access into PWM data } issi3733_rgb_t; typedef struct issi3733_rgb_adr_s { uint8_t drv; //Driver from given list uint8_t cs; //CS uint8_t swr; //SW Red uint8_t swg; //SW Green uint8_t swb; //SW Blue } issi3733_rgb_adr_t; typedef struct issi3733_led_s { uint8_t id; //According to PCB ref issi3733_rgb_t rgb; //PWM settings of R G B issi3733_rgb_adr_t adr; //Hardware addresses float x; //Physical position X float y; //Physical position Y float px; //Physical position X in percent float py; //Physical position Y in percent uint8_t scan; //Key scan code from wiring (set 0xFF if no key) } issi3733_led_t; extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; extern uint8_t gcr_desired; extern uint8_t gcr_breathe; extern uint8_t gcr_actual; extern uint8_t gcr_actual_last; void gcr_compute(void); void led_matrix_indicators(void); /*------------------------- Legacy Lighting Support ------------------------*/ #ifdef USE_MASSDROP_CONFIGURATOR #define EF_NONE 0x00000000 //No effect #define EF_OVER 0x00000001 //Overwrite any previous color information with new #define EF_SCR_L 0x00000002 //Scroll left #define EF_SCR_R 0x00000004 //Scroll right #define EF_SUBTRACT 0x00000008 //Subtract color values typedef struct led_setup_s { float hs; //Band begin at percent float he; //Band end at percent uint8_t rs; //Red start value uint8_t re; //Red end value uint8_t gs; //Green start value uint8_t ge; //Green end value uint8_t bs; //Blue start value uint8_t be; //Blue end value uint32_t ef; //Animation and color effects uint8_t end; //Set to signal end of the setup } led_setup_t; extern const uint8_t led_setups_count; extern void *led_setups[]; //LED Extra Instructions #define LED_FLAG_NULL 0x00 //Matching and coloring not used (default) #define LED_FLAG_MATCH_ID 0x01 //Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1) #define LED_FLAG_MATCH_LAYER 0x02 //Match on the current active layer (set layer to desired match layer) #define LED_FLAG_USE_RGB 0x10 //Use a specific RGB value (set r, g, b to desired output color values) #define LED_FLAG_USE_PATTERN 0x20 //Use a specific pattern ID (set pattern_id to desired output pattern) #define LED_FLAG_USE_ROTATE_PATTERN 0x40 //Use pattern the user has cycled to manually typedef struct led_instruction_s { uint16_t flags; // Bitfield for LED instructions uint32_t id0; // Bitwise id, IDs 0-31 uint32_t id1; // Bitwise id, IDs 32-63 uint32_t id2; // Bitwise id, IDs 64-95 uint32_t id3; // Bitwise id, IDs 96-127 uint8_t layer; uint8_t r; uint8_t g; uint8_t b; uint8_t pattern_id; uint8_t end; } led_instruction_t; extern led_instruction_t led_instructions[]; extern uint8_t led_animation_breathing; extern uint8_t led_animation_id; extern float led_animation_speed; extern uint8_t led_lighting_mode; extern uint8_t led_enabled; extern uint8_t led_animation_breathe_cur; extern uint8_t led_animation_direction; extern uint8_t breathe_dir; #define LED_MODE_NORMAL 0 //Must be 0 #define LED_MODE_KEYS_ONLY 1 #define LED_MODE_NON_KEYS_ONLY 2 #define LED_MODE_INDICATORS_ONLY 3 #define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value #endif // USE_MASSDROP_CONFIGURATOR #endif //_LED_MATRIX_H_