/* Copyright 2019 John M Daly This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 #define MANUFACTURER John M Daly #define PRODUCT SteamVan rev1 #define DESCRIPTION An open hardware forty percent PCB /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up here: * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf */ #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 /* key matrix size */ #define MATRIX_ROWS 4 #define MATRIX_COLS 12 /* ROWS: Top to bottom, COLS: Left to right */ #define MATRIX_ROW_PINS { A6, A5, A4, A3 } #define MATRIX_COL_PINS { A9, A8, B15, B14, B13, A10, B9, B6, B5, B4, B3, A15 } #define UNUSED_PINS /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* Backlight configuration * Backlight LEDs on B8 */ #define BACKLIGHT_PIN B8 #define BACKLIGHT_BREATHING #define WS2812_SPI SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 16 #define RGB_DI_PIN A7 #define DRIVER_LED_TOTAL RGBLED_NUM #define RGB_MATRIX_KEYPRESSES