rekahsoft
/
qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
qmk-firmware/keyboards/diverge3
History
ridingqwerty 66fe3001e4
Trim firmware sizes from default rules.mk, part 1 (#8027) 
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files

* Correct some 'rules.mk' in boards buried under vendor folders

* PR8027 patch

Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
 		2020-01-29 12:51:25 -05:00
..
keymaps Remove keymap_config extern from default keymaps (#7399) 2019-11-20 22:31:36 +00:00
config.h Add Soft Serial Speed to Diverge3 keyboard config for compatibility (#5076) 2019-08-23 22:23:53 +01:00
diverge3.c Diverge 3 initial commit 2018-02-10 17:28:49 -05:00
diverge3.h Diverge3: Readme Clean-up, Refactor and Configurator support (#3135) 2018-06-06 09:51:24 -07:00
info.json Diverge3: Readme Clean-up, Refactor and Configurator support (#3135) 2018-06-06 09:51:24 -07:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Trim firmware sizes from default rules.mk, part 1 (#8027) 2020-01-29 12:51:25 -05:00

readme.md

diverge3

A split 5x7 keyboard with 3 thumb keys. Made by Unikeyboard.

Keyboard Maintainer: IslandMan93
Hardware Supported: Pro Micro
Hardware Availability: Diverge 3

Make example for this keyboard (after setting up your build environment):

make diverge3:default

Or for the Workman layout:

make diverge3:workman

See build environment setup then the make instructions for more information.

Reflashing Animus

Reflashing the stock firmware is pretty easy. Just follow the same steps in the original guide. You will have to manually reset the Pro Micro (by shorting the GND and RST pins) during the upload step. Then reapply your keymap through Arbites.