qmk-firmware/keyboards/fc660c
Mike Rix Wolfe acef512730
[Keymap] Add User Keymap for FC660C (#8062)
* add my keymaps

* tri layer keymap

* update tri layer

* update tri layer

* cleaning up

* formatting

* move to correct location

* lily58: move caps off mod key in sublayer

* Update keyboards/lily58/keymaps/mikefightsbears/rules.mk

* Update keyboards/lily58/keymaps/mikefightsbears/rules.mk

* Update keyboards/lily58/keymaps/mikefightsbears/rules.mk

* Update keyboards/lily58/keymaps/mikefightsbears/rules.mk

* remove unnecessary trailing whacks

* remove unneeded file

* swap spacebar

* update code for comments in PR

* add fc660c keymap

* rm readme

* move layer key

* remove inconvenient alternate keys

* swap format

* add them media keys

* add rules mk

* swap caps and ctrl

* remove unneeded config

* use gesc instead of esc
2020-02-02 13:11:17 -08:00
..
keymaps [Keymap] Add User Keymap for FC660C (#8062) 2020-02-02 13:11:17 -08:00
README.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
actuation_point.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
actuation_point.h actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
config.h Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) 2019-06-06 12:09:56 -07:00
fc660c.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
fc660c.h FC660C Configurator Support (#2817) 2018-04-26 20:31:05 -07:00
i2c.c actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
i2c.h actuation point adjustment for fc980c and fc660c (#2134) 2017-12-11 21:05:12 -05:00
info.json FC660C Configurator Support (#2817) 2018-04-26 20:31:05 -07:00
matrix.c Remove _quantum functions from custom matrix.c code 2018-02-06 12:25:30 -05:00
rules.mk Trim firmware sizes from default rules.mk, part 1 (#8027) 2020-01-29 12:51:25 -05:00

README.md

FC660C Alt Controller

This file and the entire QMK port of this board are based on its TMK implementation: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/fc980c


Make example for this keyboard (after setting up your build environment):

make fc660c:default

See build environment setup then the make instructions for more information.

To flash the firmware, press the reset button on the controller and run:

sudo make fc660c:default:dfu

Thread on Geekhack: https://geekhack.org/index.php?topic=88439.0

Also: https://geekhack.org/index.php?topic=88720.0

Actuation Point adjustment

You can adjust the actuation point of the keys by setting ACTUATION_DEPTH_ADJUSTMENT in config.h. A value above 0 will result in a deeper, less sensitive actuation whereas a value above 1 will result in a more shallow, more sensitive actuation. Be careful with this setting and use small values (+/-5). See the actuation-point-example keymap of the fc980c keyboard for an example. For more information, inspect the fc660c_i2c branch of TMK here. Functionality for writing to the EEPROM has deliberately not been included to reduce the chance of people messing up their boards.

Pinouts

|Switch  |Controller |
|  board |     board |Description                           |Schematic  |ATmega32u4
|--------|-----------|--------------------------------------|-----------|------------
| 1      |20         | FG                                   |FG         |GND
| 2      |19         | GND                                  |GND        |GND
| 3      |18         | GND                                  |GND        |GND
| 4      |17         | 3.3V                                 |V33        |3.3V/5V
| 5      |16         | 5V                                   |Vcc        |5V
| 6      |15         |*Z6-TP1684-4-HYS(o)                   |FBSTB      |PC7
| 7      |14         |*Z6-TP1684-2-KEY(i)                   |OUT        |PC6
| 8      |13         |*Z2-AD5258-5-SCL(I2C)                 |SCL        |PD0(TWI)
| 9      |12         |*Z2-AD5258-4-SDA(I2C)                 |SDA        |PD1(TWI)
|10      |11         |*Z4-LV4051A-6-~EN(Col 0-7)            |INH_1      |PB4
|11      |10         |*Z5-LV4051A-6-~EN(Col 8-F)            |INH_2      |PB3
|12      | 9         |+Z7-LV07A-5 (LV4051A-9-C)             |SEL_C      |PB2
|13      | 8         |+Z7-LV07A-1 (LV4051A-10-B)            |SEL_B      |PB1
|14      | 7         |+Z7-LV07A-3 (LV4051A-11-A)            |SEL_A      |PB0
|15      | 6         |+Z3-LVC138A-3-C                       |COL4       |PD6
|16      | 5         |+Z3-LVC138A-2-B                       |COL3       |PD5
|17      | 4         |+Z3-LVC138A-1-A                       |COL2       |PD4
|18      | 3         |+Z3-LVC138A-4-~G2A  Z6-TP1684-5-~EN   |COL1       |PD7
|19      | 2         |+Z7-LV07A-11-~InsertLED               |LED1       |PB5
|20      | 1         |+Z7-LV07A-13-~CapsLED                 |LED2       |PB6
* 5V intferface
+ 3.3V interface

Key Matrix

Row5-7 have no key, you can omit scaning on those lines. Topre original controller scans those rows for some reason.

|    |0   |1   |2   |3   |4   |5   |6   |7   |8   |9   |A   |B   |C   |D   |E   |F   |
|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|
|   0|Q   |W   |E   |Tab |R   |U   |T   |Y   |O   |P   |[   |I   |]   |    |\   |Del |
|   1|1   |2   |3   |Esc |4   |7   |5   |6   |9   |0   |-   |8   |=   |    |BSpc|Ins |
|   2|    |LWin|LAlt|LCtl|    |    |    |Spc |RAlt|    |RCtl|    |Fn  |Down|Left|Rght|
|   3|    |Z   |X   |LSft|C   |N   |V   |B   |,   |.   |/   |M   |RSft|Up  |    |    |
|   4|A   |S   |D   |Caps|F   |J   |G   |H   |L   |;   |'   |K   |    |    |Entr|    |
|   5|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |
|   6|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |
|   7|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |

Logic analyzer pics:

This code emuluates what original cotnroller does for matrix scan.

Row designation

LV138A(Z3) selects a row line and gives strobe by enabling with ~G2A(18).

|Row |A/17|B/16|C/15|
|----|----|----|----|
|0   |0   |0   |0   |
|1   |1   |0   |0   |
|2   |0   |1   |0   |
|3   |1   |1   |0   |
|4   |0   |0   |1   |
|5   |1   |0   |1   |
|6   |0   |1   |1   |
|7   |1   |1   |1   |

Column designation

LV4051A(Z4, Z5) select one of 16 column lines to sense capacitance of switches.

|Col |A/14|B/13|C/12|Z4-EN/10|Z5-EN/11|
|----|----|----|----|--------|--------|
|0   |0   |0   |0   |0       |1       |
|1   |1   |0   |0   |0       |1       |
|2   |0   |1   |0   |0       |1       |
|3   |1   |1   |0   |0       |1       |
|4   |0   |0   |1   |0       |1       |
|5   |1   |0   |1   |0       |1       |
|6   |0   |1   |1   |0       |1       |
|7   |1   |1   |1   |0       |1       |
|8   |0   |0   |0   |1       |0       |
|9   |1   |0   |0   |1       |0       |
|A   |0   |1   |0   |1       |0       |
|B   |1   |1   |0   |1       |0       |
|C   |0   |0   |1   |1       |0       |
|D   |1   |0   |1   |1       |0       |
|E   |0   |1   |1   |1       |0       |
|F   |1   |1   |1   |1       |0       |

FCC documents

https://fccid.io/RPKFC660C

Datasheets

3.3V power supply

LV07A and LVC138A are 5V-tolerant and can be powered with 5V, the keyboard will work only with 5V power supply. It may not be completely safe to operate LV138A with 5V Vcc, its datasheet says:

Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Digipot AD5258

Controller can operate AD5258 via I2C to change actuation point of keys. This may make keyboard unusable accidentally and it will be difficult to recovery in some situation. For safety firmware doesn't support it at this point, though.

Lower value of RDAC register causes shallower actuation point.

Resources