qmk-firmware/tmk_core/protocol/usb_hid
XScorpion2 957070a6b5 Added OLED Display autoscroll during periods of OLED data inactivity (#6546)
* Added OLED Display autoscroll during periods of OLED data inactivity.

* Fixing compile errors

* Feedback from review
2019-08-25 12:37:55 -07:00
..
USB_Host_Shield_2.0 Fixed dead links (#2451) 2018-03-01 07:45:47 -08:00
arduino-1.0.1 Merge commit 'a074364c3731d66b56d988c8a6c960a83ea0e0a1' as 'tmk_core' 2015-04-10 01:32:04 +09:00
test Remove unnecessary IS_COMMAND definitions from recently added keyboards (#5065) 2019-02-06 11:28:47 -08:00
README Merge commit 'a074364c3731d66b56d988c8a6c960a83ea0e0a1' as 'tmk_core' 2015-04-10 01:32:04 +09:00
override_Serial.cpp Merge commit 'a074364c3731d66b56d988c8a6c960a83ea0e0a1' as 'tmk_core' 2015-04-10 01:32:04 +09:00
override_wiring.c Added OLED Display autoscroll during periods of OLED data inactivity (#6546) 2019-08-25 12:37:55 -07:00
parser.cpp some major steps toward making the usb-usb converter work 2017-08-15 23:14:41 -04:00
parser.h some major steps toward making the usb-usb converter work 2017-08-15 23:14:41 -04:00
usb_hid.h Merge commit 'a074364c3731d66b56d988c8a6c960a83ea0e0a1' as 'tmk_core' 2015-04-10 01:32:04 +09:00

README

USB HID protocol
================
Host side of USB HID keyboard protocol implementation.
Only standard HID Boot mode is supported at this time. This means most of normal keyboards are supported while proprietary >6KRO and NKRO is not.

Third party Libraries
---------------------
USB_Host_Shield_2.0
    Circuits@Home repository is git-submoduled. Do git submodule init & update to get the content.
    https://github.com/felis/USB_Host_Shield_2.0

arduino-1.0.1
    Arduino files copied from:
    https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}


Test build
----------
In test directory;
    $ make
    $ DEV=/dev/ttyACM0 make program

You can see HID keyboard reports on debug output.


Restriction and Bug
-------------------
Not supported/confirmed yet.
    Hub, suspend, keyboard LED

Switching power on VBUS:
    To power reset device.
    http://www.circuitsathome.com/camera-control/simulating-cable-disconnect-on-usb-host-shield-2-0
    This is needed for a device which are not initilized with 'USB Bus Reset'(long SE0)

Can't bus-reset a keyboard which already attached on bus properly.
    Slow start up of Leonardo's bootloader causes this?
    Need to unplug/plug a keyboard after firmware starts up.
    MAX3421E doesn't work SAMPLEBUS well to know whether device connected or not.

Keyboard with other endpoints than boot keyboard may go wrong.
    On my keyboard with mouse key the converter locks up when using mouse key function.

Can't compile on Windows filesystem.
    On Linux no problem.
    Windows doesn't know difference between common/print.h and arduino/Print.h.
    Change file name common/print.h to console.h ?