qmk-firmware/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h

128 lines
3.4 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
#include "print.h"
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
#define ST7565_ADC ST7565_ADC_NORMAL
#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
#define ST7565_PAGE_ORDER 0,1,2,3
/*
* Custom page order for several LCD boards, e.g. HEM12864-99
* #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
*/
#define ST7565_GPIOPORT GPIOC
#define ST7565_PORT PORTC
#define ST7565_A0_PIN 7
#define ST7565_RST_PIN 8
#define ST7565_MOSI_PIN 6
#define ST7565_SLCK_PIN 5
#define ST7565_SS_PIN 4
#define palSetPadModeRaw(portname, bits) \
ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
#define palSetPadModeNamed(portname, portmode) \
palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
// DSPI Clock and Transfer Attributes
// Frame Size: 8 bits
// MSB First
// CLK Low by default
static const SPIConfig spi1config = {
NULL,
/* HW dependent part.*/
ST7565_GPIOPORT,
ST7565_SS_PIN,
SPIx_CTARn_FMSZ(7)
| SPIx_CTARn_ASC(7)
| SPIx_CTARn_DT(7)
| SPIx_CTARn_CSSCK(7)
| SPIx_CTARn_PBR(0)
| SPIx_CTARn_BR(7)
//SPI_CR1_BR_0
};
static bool_t st7565_is_data_mode = 1;
static GFXINLINE void init_board(GDisplay *g) {
(void) g;
palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
st7565_is_data_mode = 1;
palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
palSetPadModeRaw(SS, ST7565_SPI_MODE);
spiInit();
spiStart(&SPID1, &spi1config);
spiSelect(&SPID1);
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
if (state) {
palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
}
else {
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
}
}
static GFXINLINE void acquire_bus(GDisplay *g) {
(void) g;
// Only the LCD is using the SPI bus, so no need to acquire
// spiAcquireBus(&SPID1);
}
static GFXINLINE void release_bus(GDisplay *g) {
(void) g;
// Only the LCD is using the SPI bus, so no need to release
//spiReleaseBus(&SPID1);
}
static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
(void) g;
if (st7565_is_data_mode) {
// The sleeps need to be at lest 10 vs 25 ns respectively
// So let's sleep two ticks, one tick might not be enough
// if we are at the end of the tick
chThdSleep(2);
palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
chThdSleep(2);
st7565_is_data_mode = 0;
}
spiSend(&SPID1, 1, &cmd);
}
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
(void) g;
if (!st7565_is_data_mode) {
// The sleeps need to be at lest 10 vs 25 ns respectively
// So let's sleep two ticks, one tick might not be enough
// if we are at the end of the tick
chThdSleep(2);
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
chThdSleep(2);
st7565_is_data_mode = 1;
}
spiSend(&SPID1, length, data);
}
#endif /* _GDISP_LLD_BOARD_H */