qmk-firmware/keyboards/412_64/rules.mk
FateEverywhere 4609d68ddc Keyboard: Add 412 64 Model 00 keyboard. (#4400)
* Add 412-64 keyboard firmware

It's pretty barebones for now, but the Model 00 is also a pretty barebones machine. Model 01 won't be better, but plenty of pins exist for things like LEDs on Model 02.

* MANU/PROD ID changes.

Changed around the MANUFACTURER and PRODUCT IDs to be more polite when viewed in qmk toolbox.

* Fixing PROD again.

For the love of all that is good and holy, that was ugly. This new one looks better. This stuff matters to me for some reason.

* Yep, updating MANU again.

There we go. That's better - From my name to my "design firm".

* Update keyboards/412_64/keymaps/default/keymap.c

Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>

* Update keyboards/412_64/rules.mk

Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>

* Update keyboards/412_64/rules.mk

Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>

* Update keyboards/412_64/rules.mk

Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>

* Update keyboards/412_64/rules.mk

Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
2018-11-13 08:38:48 -08:00

74 lines
3.2 KiB
Makefile

# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
LAYOUTS = ortho_4x16