qmk-firmware/keyboards/ergodox_ez
2018-02-02 01:02:58 -05:00
..
keymaps QWERTY based layout with thumb-chording (SHIFT + SPECIAL) and programming layer. 2018-02-02 01:02:58 -05:00
util Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
190hotfix.sh Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
config.h Merge pull request #2047 from seebs/seebs/ergodox_brightness 2017-11-27 08:25:24 -05:00
ergodox_ez.c Merge pull request #2047 from seebs/seebs/ergodox_brightness 2017-11-27 08:25:24 -05:00
ergodox_ez.h Make brightness easier to change 2017-11-23 15:37:39 -06:00
i2cmaster.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
matrix.c Don't "unselect" left-hand rows 2017-12-10 00:40:41 -05:00
readme.md Allow multiple process_record() calls per scan 2017-11-21 00:20:52 -05:00
rules.mk Updates bootloader settings, adds file size check (#2029) 2017-11-27 23:08:21 -05:00
twimaster.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make keymapname, for example make default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.