rekahsoft/qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3d53ea439c
qmk-firmware/keyboards/percent/skog_lite
History
MechMerlin ec053c8283 [Keyboard] Percent Skog Lite (#6882) 
* initial commit of skog_lite

* add layout macro from misterkeeb's tool

* add default keymap

* add pins used

* rgb support

* add tkl ansi community support

* update readmes

* add new layouts and configurator support
2019-10-04 22:03:10 -07:00
..
keymaps/default
config.h [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
info.json [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
readme.md [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
rules.mk [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
skog_lite.c [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00
skog_lite.h
usbconfig.h [Keyboard] Percent Skog Lite (#6882) 2019-10-04 22:03:10 -07:00

readme.md

Skog Lite

TKL Custom Keyboard.

Keyboard Maintainer: mechmerlin
Hardware Supported: Skog Lite PCB
Hardware Availability: Kono Store

Make example for this keyboard (after setting up your build environment):

make percent/skog_lite:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K05, commonly programmed as F5 while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

  2. Install crosspack-avr.

    brew cask install crosspack-avr

  3. Install the following packages:

    brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.