qmk-firmware/keyboards/handwired/daishi/config.h
Drashna Jaelre f6c7e11426 Remove the need to specify NUM_OF_ENCODERS for the Encoder feature (#6328)
* Remove the need to set NUM_OF_ENCODERS

Instead, calculate the size of the array, and use that instead

* Add hack for split common support

* Remove NUM_OF_ENCODERS from keyboard config

Can be reverted, if needed
2019-07-16 01:40:54 -07:00

61 lines
1.9 KiB
C

/*
Copyright 2019 Crokto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x6D6D
#define PRODUCT_ID 0x0001
#define DEVICE_VER 0x0001
#define MANUFACTURER MetaMechs
#define PRODUCT Daishi
#define DESCRIPTION Compact Battlecruiser
/* key matrix size */
#define MATRIX_ROWS 7
#define MATRIX_COLS 18
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D6, D7, E0, E1, C0, C1, C2 }
#define MATRIX_COL_PINS { E6, E7, E3, B0, B1, B2, A6, A5, A4, A3, A2, A1, A0, F7, F6, F5, F4, F3 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Set up rotary encoder */
#define ENCODERS_PAD_A { F1 }
#define ENCODERS_PAD_B { F0 }
#define ENCODER_RESOLUTION 2
/* Set delay for tap_code on rotary encoder */
#define TAP_CODE_DELAY 10