qmk-firmware/quantum/stm32/proton_c.mk
Joel Challis 1249da4e8e
Use task driven PWM for CTPC until ARM can provide automatic configuration (#6928)
* Use task driven PWM for CTPC until ARM can provide automatic configuration

* Update CTPC docs to cover backlight
2019-11-02 21:21:00 +00:00

50 lines
1.3 KiB
Makefile

# Proton C MCU settings for converting AVR projects
# These are defaults based on what has been implemented for ARM boards
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
# Force task driven PWM until ARM can provide automatic configuration
ifneq ($(strip $(BACKLIGHT_ENABLE)), no)
BACKLIGHT_ENABLE = software
endif
# The rest of these settings shouldn't change
## chip/board settings
# - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F3xx
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
MCU_LDSCRIPT = STM32F303xC
# Startup code to use
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f3xx
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
BOARD = GENERIC_STM32_F303XC
# Cortex version
MCU = cortex-m4
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 7
USE_FPU = yes
# Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
OPT_DEFS =
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS = -p df11 -v 0483