rekahsoft
/
qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
qmk-firmware/keyboards/kbdfans/kbdpad/mk1
History
Jonathan Rascher 732d1dd4f6 Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 
* Update keyboard kit URL

* Replace custom RGB driver with new one from #7183

* Replace backlight with standard impl

* Remove some unnecessary default settings

* Disable COMMAND since docs want it off by default

(There's no working IS_COMMAND set for this board anyway, so it's
already a nop.)
 		2019-11-04 09:30:15 +11:00
..
keymaps/default [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00
config.h Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
info.json Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
mk1.c Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
mk1.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00
readme.md Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
rules.mk Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) 2019-11-04 09:30:15 +11:00
usbconfig.h [Keyboard] New Keyboard: KBDPad MKI (#6452) 2019-08-01 09:39:03 -07:00

readme.md

KBDPad MKI

Custom numpad.

Keyboard Maintainer: MechMerlin
Hardware Supported: KBDPad MKI
Hardware Availability: KBDfans

Make example for this keyboard (after setting up your build environment):

make kbdfans/kbdpad/mk1:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as 0 while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

  2. Install crosspack-avr.

    brew cask install crosspack-avr

  3. Install the following packages:

    brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.