qmk-firmware/keyboards/hineybush/h88
Mikkel Jeppesen 05d6e6ca78 Ensure setPinInput actually sets input high-Z (#6237)
* Ensure setPinInput actually sets input high-z

* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan

* Fixed instances of setInput to use new behavour

* Changed kmac matrix to use input with pullups

* Update keyboards/gh60/revc/revc.h

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fixed input state for unselect_rows

* fixed merge conflict

* Updated all instances of older uses of setPinInput()

* Fixed naming mistake

Co-authored-by: fauxpark <fauxpark@gmail.com>
2020-01-26 23:04:38 -05:00
..
keymaps [Keyboard] add VIA support for hiney PCBs (#7910) 2020-01-16 23:15:08 -08:00
config.h [Keyboard] Add h88 PCB (#7201) 2019-10-31 14:14:37 -07:00
h88.c Ensure setPinInput actually sets input high-Z (#6237) 2020-01-26 23:04:38 -05:00
h88.h [Keyboard] Add h88 PCB (#7201) 2019-10-31 14:14:37 -07:00
info.json [Keyboard] Add h88 PCB (#7201) 2019-10-31 14:14:37 -07:00
readme.md [Keyboard] Add h88 PCB (#7201) 2019-10-31 14:14:37 -07:00
rules.mk [Keyboard] add VIA support for hiney PCBs (#7910) 2020-01-16 23:15:08 -08:00

h88

A QMK-powered replacement PCB for custom TKL keyboards that feature an extra key in the Fn row. This PCB is designed with the TGR Jane V2 CE in mind, however other keyboards with the same layout and a.87 USB positioning may work.

Keyboard Maintainer: hineybush
Hardware Supported: h88 ver 1.0
Hardware Availability: hineybush.com

Make example for this keyboard (after setting up your build environment):

 make hineybush/h88:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

h88 hardware information

Controller: Atmega32u4

/* Column pin configuration
* col: 0   1   2   3   4   5   6   7   8   
* pin: F0  F1  F4  F5  F6  F7  C7  C6  D2
*/
 
/* Row pin configuration
* row: 0   1   2   3   4   5   6   7   8   9   10  11
* pin: B0  B1  B2  B3  D0  D1  B5  B6  D7  B4  D6  D4  (Rev 1)
*/

The H88 PCB utilizes duplex matrix organization.

Caps Lock LED: D5
Scroll Lock LED: E6
Num Lock LED: not supported
Backlight Pin: B7
RGB Data Pin: D3

For in-switch indicator LEDs, bridge the center pad of the J1 and J2 3-pad jumpers follwing the small silk screen line.