23ce0b43b6
* updated read.md file * added image to flash hex on ergodone * corrected image link * updated direct image link * image with larger text |
||
|---|---|---|
| .. | ||
| keymaps/default | ||
| Makefile | ||
| config.h | ||
| ergodone.c | ||
| ergodone.h | ||
| expander.c | ||
| expander.h | ||
| i2cmaster.h | ||
| matrix.c | ||
| readme.md | ||
| rules.mk | ||
| twimaster.c | ||
readme.md
ErgoDone
ErgoDone is a modified ErgoDox with pre-soldered components made by K.T.E.C. It has different wiring and uses a Pro Micro instead of Teensy.
- Keyboard Maintainer: Yu He
- Hardware Supported:
- ErgoDone ver. 1.3 (tested)
- Hardware Availability: KBDFans
Make example for this keyboard (after setting up your build environment):
make ergodone-default
See build environment setup then the make instructions for more information.
Flashing the keyboard
The ErgoDone uses an HID bootloader rather than the Teensy one, and requires a different way of flashing the firmware.
-
While plugging in the USB cable, hold the two right-most keys on the top row of the left half of the ErgoDone to enter FLASH mode and flash a hex file.
-
Use the
hid_bootloader_cliutlity from TKG Toolkit:hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_default