qmk-firmware/keyboards/ut472/rules.mk
keyhive fbc40032e7 [Keyboard] add ut47.2 (#5788)
* adding ut47.2

adding ut47.2

* Update keyboards/ut472/ut472.c

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/rules.mk

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/ut472.c

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/rules.mk

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* changed shift enter special keys to KC_SFTENT

changed shift enter special keys to KC_SFTENT

* Update keyboards/ut472/ut472.h

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/ut472.h

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/ut472.h

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/readme.md

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* Update keyboards/ut472/readme.md

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* updated for sourcing

updated for sourcing

* Update keyboards/ut472/readme.md

Co-Authored-By: keyhive <42986966+keyhive@users.noreply.github.com>

* changed flash to make

changed flash to make
2019-05-05 22:01:43 -07:00

70 lines
2.9 KiB
Makefile

# MCU name
MCU = atmega32u2
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RGBLIGHT_ENABLE = yes