qmk-firmware/keyboards/handwired/arrow_pad
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
..
keymaps Adds a default value for IS_COMMAND for COMMAND feature (#4301) 2019-01-26 15:49:45 -08:00
arrow_pad.c remove hardware files, move arrow pad 2017-06-18 12:33:14 -04:00
arrow_pad.h handwired/arrow_pad Refactor and Configurator support (#4498) 2018-11-26 20:57:15 -08:00
config.h Adds a default value for IS_COMMAND for COMMAND feature (#4301) 2019-01-26 15:49:45 -08:00
info.json handwired/arrow_pad Refactor and Configurator support (#4498) 2018-11-26 20:57:15 -08:00
readme.md handwired/arrow_pad Refactor and Configurator support (#4498) 2018-11-26 20:57:15 -08:00
rules.mk Update keyboards' rules.mk/Makefiles (#1442) 2017-06-30 16:09:52 -04:00

arrow_pad keyboard firmware

Keyboard Info

The ArrowPad is a wired conversion that can be made to any stand-alone keypad. It uses two main layers - a standard numpad, and a more advanced arrow cluster navigator.

The first 24-key ArrowPad was handwired, but the PCB was wired as listed below.

<Chip Ref Des> pin <Pin #>
<Keycap Name> (Silkscreen Name if different) - <Switch Pin #>


Note:
U2 pin 2 is the Num Lock LED and is  active low.

U2 pin 1
Clear (Num Lock) - 1
Enter - 2
Esc (ESC) - 2


U2 pin 3
- - 1

U2 pin 4
7 - 2
8 - 2
9 - 2

U2 pin 5
* - 2
Delete (BACK SPACE) -  2

U2 pin 6
1 - 2
0 - 2
. - 2
, - 2

U2 pin 7
4 - 2
5 - 2
6 - 2

U2 pin 8
Tab - 2
= (/) - 2

U2 pin 13
Delete (BACK SPACE) -  1
9 - 1
6 - 1
3 - 1
. - 1

U2 pin 14
Tab - 1
8 - 1
5 - 1
2 - 1
0 - 1

U2 pin 15
Esc (ESC) - 1
= (/) - 1
/ (*) - 1
7 - 1
4 - 1
1 - 1
+ - 1

U2 pin 16
Enter - 1
* (<--) - 1
, - 1

U2 pin 17
Fn (#NAME?) - 1
- - 2
Clear (Num Lock) - 2

U2 pin 18
Fn (#NAME?) - 2
* (<--) - 2
+ - 2
3 - 2
2 - 2

More info can be found on GeekHack

The second ArrowPad was a conversion from a 21-key Genovation keypad. It used a 2 row x 11 column matrix.

#define LAYOUT_pad21( \
    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
    KM___7, KM___8, KM___9,         \
    KM___4, KM___5, KM___6, KM_PLS, \
    KM___1, KM___2, KM___3,         \
    KM___0,         KM_DOT, KM_ENT  \
) { \
    { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
    { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO,  KM___0, KM_DOT, }, \
}

Quantum MK Firmware

For the full Quantum feature list, see the parent readme.md.

Building

Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type make to generate your .hex - you can then use the Teensy Loader to program your .hex file.

Depending on which keymap you would like to use, you will have to compile slightly differently.

Default

To build with the default keymap, simply run make handwired/arrow_pad:default.

Other Keymaps

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named <name>.c in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.

To build the firmware binary hex file with a keymap just do make with a keymap like this:

$ make handwired/arrow_pad:[default|pad_21|pad_24|<name>]

Keymaps follow the format <name>.c and are stored in the keymaps folder.