rekahsoft
/
qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
qmk-firmware/keyboards/pearl
History
Ryan 5e3951b361
Remove NO_UART defines from config.h for V-USB boards (#8351) 		2020-03-09 19:58:25 +00:00
..
keymaps Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319) 2018-11-27 15:34:06 -08:00
config.h Remove NO_UART defines from config.h for V-USB boards (#8351) 2020-03-09 19:58:25 +00:00
info.json More QMK Configurator Support for Pearl (#2814) 2018-04-26 17:19:42 -07:00
pearl.c Fix LED configuration for PS2AVRGB boards (#7989) 2020-01-23 19:24:10 -08:00
pearl.h [Keyboard] Pearl Refactors (#5907) 2019-05-19 09:50:57 -07:00
readme.md [Keyboard] Update ATmega32A readme files to match template (#7462) 2019-11-23 20:42:20 -08:00
rules.mk Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) 2019-11-04 16:05:03 -08:00
usbconfig.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00

readme.md

Pearl 40%

Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel ATMEGA32A MCU.

Make example for this keyboard (after setting up your build environment):

make pearl:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make pearl:default:flash

Reset Key: Hold down the key located at K00, commonly programmed as Esc while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.