rekahsoft
/
qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
qmk-firmware/keyboards/rgbkb/sol/keymaps/xyverz/keymap.c

331 lines
14 KiB
C
Raw Blame History

#include QMK_KEYBOARD_H
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "common/ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_DVORAK = 0,
_DESTINY,
_QWERTY,
_COLEMAK,
_LOWER,
_RAISE,
_ADJUST
};
enum custom_keycodes {
DVORAK = SAFE_RANGE,
DESTINY,
QWERTY,
COLEMAK,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DVORAK] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_END, KC_PGDN, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \
KC_RCTL, KC_A, KC_O, KC_E, KC_U, KC_I, XXXXXXX, XXXXXXX, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, XXXXXXX, XXXXXXX, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \
),
[_DESTINY] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_END, KC_PGDN, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \
KC_RCTL, KC_A, KC_O, KC_E, KC_U, KC_I, XXXXXXX, XXXXXXX, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, XXXXXXX, XXXXXXX, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \
),
[_QWERTY] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_END, KC_PGDN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_SLSH, \
KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, XXXXXXX, XXXXXXX, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, XXXXXXX, XXXXXXX, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \
),
[_COLEMAK] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_END, KC_PGDN, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_SLSH, \
KC_RCTL, KC_A, KC_R, KC_S, KC_T, KC_G, XXXXXXX, XXXXXXX, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, XXXXXXX, XXXXXXX, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \
),
[_LOWER] = LAYOUT( \
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, XXXXXXX, XXXXXXX, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
KC_DEL, _______, _______, KC_INS \
),
[_RAISE] = LAYOUT( \
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, XXXXXXX, XXXXXXX, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
KC_DEL, _______, _______, KC_INS \
),
/* ADJUST
* ,------------------------------------------------. ,------------------------------------------------.
* | F11 | F1 | F2 | F3 | F4 | F5 | RESET| | | F6 | F7 | F8 | F9 | F10 | F12 |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | |QWERTY|COLEMK|DVORAK|DESTNY| | | | | PrSc | ScLk | NmLk | | |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | | Mute | Vol- | Vol+ | | | | |RGBTOG|RGBMOD| HUI | SAI | VAI | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | Prev | Play | Next | | | | | |RGBRMD| HUD | SAD | VAD | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | Home | End | | | | | | PgUp | PgDn | | | |
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | Del | | | | Ins |
* `-------------' `-------------'
*/
[_ADJUST] = LAYOUT( \
_______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_NLCK, _______, _______, \
KC_CAPS, _______, QWERTY, COLEMAK, DVORAK, DESTINY, XXXXXXX, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, \
_______, _______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
KC_DEL, _______, _______, KC_INS \
)
};
// define variables for reactive RGB
bool TOG_STATUS = false;
int RGB_current_mode;
// Setting ADJ layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode);
#endif
layer_on(layer3);
} else {
layer_off(layer3);
}
}
layer_state_t layer_state_set_user(layer_state_t state) {
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case DVORAK:
if (record->event.pressed) {
set_single_persistent_default_layer(_DVORAK);
}
return false;
case COLEMAK:
if (record->event.pressed) {
set_single_persistent_default_layer(_COLEMAK);
}
return false;
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
/*
Commenting this out since I removed the layer, but I want this in here for reference.
case FN:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(15);
#endif
}
layer_on(_FN);
} else {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
#endif
layer_off(_FN);
TOG_STATUS = false;
}
return false;
break;
*/
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// hook point for 'led_test' keymap
// 'default' keymap's led_test_init() is empty function, do nothing
// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35);
__attribute__ ((weak))
void led_test_init(void) {}
void matrix_scan_user(void) {
led_test_init();
iota_gfx_task(); // this is what updates the display continuously
}
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
//assign the right code to your layers for OLED display
#define L_BASE 0
#define L_FN (1<<_FN)
#define L_ADJ (1<<_ADJ)
static void render_logo(struct CharacterMatrix *matrix) {
static char logo[]={
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
0};
matrix_write(matrix, logo);
//matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
}
void render_status(struct CharacterMatrix *matrix) {
// Render to mode icon
static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
if(keymap_config.swap_lalt_lgui==false){
matrix_write(matrix, logo[0][0]);
matrix_write_P(matrix, PSTR("\n"));
matrix_write(matrix, logo[0][1]);
}else{
matrix_write(matrix, logo[1][0]);
matrix_write_P(matrix, PSTR("\n"));
matrix_write(matrix, logo[1][1]);
}
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
char buf[40];
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
matrix_write_P(matrix, PSTR("\nLayer: "));
switch (layer_state) {
case L_BASE:
matrix_write_P(matrix, PSTR("Default"));
break;
/* case L_FN:
matrix_write_P(matrix, PSTR("FN"));
break; */
case L_ADJ:
/* case L_ADJ_TRI: */
matrix_write_P(matrix, PSTR("ADJ"));
break;
default:
matrix_write(matrix, buf);
}
// Host Keyboard LED Status
char led[40];
snprintf(led, sizeof(led), "\n%s %s %s",
(IS_HOST_LED_ON(USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
(IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
matrix_write(matrix, led);
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
matrix_clear(&matrix);
if(is_master){
render_status(&matrix);
}else{
render_logo(&matrix);
}
matrix_update(&display, &matrix);
}
#endif
Reference in New Issue View Git Blame Copy Permalink