qmk-firmware/keyboards/projectkb/alice/rules.mk
Andrew Kannan c2f9e018ab [Keyboard] Add ProjectKeyboard Alice PCB to QMK (#5581)
* Update instant60 for tsangan version

* Add project alice keyboard

* remove

* Remove commented out code

* Update readme

* Add newline

* Update keyboards/projectkb/alice/readme.md

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* Update keyboards/projectkb/alice/halconf.h

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* Update keyboards/projectkb/alice/halconf.h

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* Fix ifdef and use helper macros

* Add reset keycode

* udpate keymap

* Add RGB Keycodes

* Styling things

* remove unused enum

* fix
2019-05-05 21:08:12 -07:00

57 lines
2.0 KiB
Makefile

# project specific files
# SRC = ssd1306.c
## chip/board settings
# the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F0xx
# linker script to use
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
MCU_LDSCRIPT = STM32F072xB
# startup code to use
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f0xx
# it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
BOARD = ST_STM32F072B_DISCOVERY
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
MCU = cortex-m0
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 6
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
# a custom board definition that you plan to reuse).
# If you're not setting it here, leave it commented out.
# It is chip dependent, the correct number can be looked up here (page 175):
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
# This also requires a patch to chibios:
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
RGBLIGHT_ENABLE = yes
# RAW_ENABLE = yes
# DYNAMIC_KEYMAP_ENABLE = yes