qmk-firmware/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/GettingStarted.txt

38 lines
2.1 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \page Page_GettingStarted Getting Started
*
* Getting started with LUFA is easy; read the content below to get on your way to your first LUFA powered application.
*
* \section Sec_DemosOverview The LUFA Demo Applications
*
* Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and
* ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and
* run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz
* master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most
* popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included
* LUFA applications using different settings, see the subsections below.
*
* \section Sec_ClassOrLowLevel Class Driver and Low Level Demos
*
* Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new
* to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the pre-made USB
* Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications.
* These demos give a basic but easy to use interface to the USB class used in the demo application, such as HID or
* CDC.
*
* Those needing absolute control over the class implementation can look at the LowLevel demos, which implement the
* required USB class directly in the demo application using the lowest level LUFA APIs.
*
*
* <b>Subsections:</b>
* \li \subpage Page_ConfiguringApps - How to Configure the Included Demos, Projects and Bootloaders
* \li \subpage Page_CompilingApps - How to Compile the Included Demos, Projects and Bootloaders
* \li \subpage Page_ProgrammingApps - How to Program an AVR with the Included Demos, Projects and Bootloaders
*/