rekahsoft
/
qmk-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
qmk-firmware/keyboards/kbdfans/kbdpad/mk1/readme.md

48 lines
1.8 KiB
Markdown
Raw Normal View History

[Keyboard] New Keyboard: KBDPad MKI (#6452) * initial commit * define pins used and matrix size * update readme * delete un needed files * make an appropriate switch matrix * create appropriate keymap * one little typo * add QMK Configurator support * Update keyboards/kbdfans/kbdpad/mk1/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-08-01 16:39:03 +00:00
# KBDPad MKI
Custom numpad.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: KBDPad MKI
Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883) * Update keyboard kit URL * Replace custom RGB driver with new one from #7183 * Replace backlight with standard impl * Remove some unnecessary default settings * Disable COMMAND since docs want it off by default (There's no working IS_COMMAND set for this board anyway, so it's already a nop.)
2019-11-03 22:30:15 +00:00
Hardware Availability: [KBDfans](https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit)
[Keyboard] New Keyboard: KBDPad MKI (#6452) * initial commit * define pins used and matrix size * update readme * delete un needed files * make an appropriate switch matrix * create appropriate keymap * one little typo * add QMK Configurator support * Update keyboards/kbdfans/kbdpad/mk1/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-08-01 16:39:03 +00:00
Make example for this keyboard (after setting up your build environment):
make kbdfans/kbdpad/mk1:default
Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
**Reset Key:** Hold down the key located at `K00`, commonly programmed as `0` while plugging in the keyboard.
Windows:
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
2. Place your keyboard into reset.
3. Press the `Find Device` button and ensure that your keyboard is found.
4. Press the `Open .hex File` button and locate the `.hex` file you created.
5. Press the `Flash Device` button and wait for the process to complete.
macOS:
1. Install homebrew by typing the following:
```
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
```
2. Install `crosspack-avr`.
```
brew cask install crosspack-avr
```
3. Install the following packages:
```
brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
```
4. Place your keyboard into reset.
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).