Adding default settings for ERM motors for Hadron v3 haptic feedback (#4761)

* adding default settings to support 3v ERM vibration motors

* set default settings of haptic motor for LV061228B-L64-A 2v LRA

* update ishtob keymap and fix config settings
This commit is contained in:
ishtob 2019-01-02 16:30:59 -05:00 committed by MechMerlin
parent a7b1b146d1
commit 484c85bd0d
3 changed files with 22 additions and 12 deletions

View File

@ -148,13 +148,26 @@
#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ #define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* default 3V ERM vibration motor voltage and library*/
#if FB_ERM_LRA == 0
#define RATED_VOLTAGE 3
#define V_RMS 2.3
#define V_PEAK 3.30
/* Library Selection */
#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
/* default 2V LRA voltage and library */
#elif FB_ERM_LRA == 1
#define RATED_VOLTAGE 2 #define RATED_VOLTAGE 2
#define V_RMS 2.0 #define V_RMS 2.0
#define V_PEAK 2.85 #define V_PEAK 2.85
#define F_LRA 205 #define F_LRA 200
/* Library Selection */ /* Library Selection */
#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ #define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
#endif
/* Control 1 register settings */ /* Control 1 register settings */
#define DRIVE_TIME 25 #define DRIVE_TIME 25
#define AC_COUPLE 0 #define AC_COUPLE 0
@ -179,14 +192,11 @@
#define ZC_DET_TIME 0 #define ZC_DET_TIME 0
#define AUTO_CAL_TIME 3 #define AUTO_CAL_TIME 3
//#define WS2812_LED_N 2 //#define RGBLIGHT_ANIMATIONS
//#define RGBLED_NUM WS2812_LED_N
//#define WS2812_TIM_N 2
//#define WS2812_TIM_CH 2
//#define PORT_WS2812 GPIOA
//#define PIN_WS2812 15
//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP
//#define RGBLED_NUM 10
//#define RGB_DI_PIN B5
//#define DRIVER_LED_TOTAL RGBLED_NUM
//#define RGB_MATRIX_KEYPRESSES
#endif #endif

View File

@ -82,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LOWER] = LAYOUT_wrapper( [_LOWER] = LAYOUT_wrapper(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_PIPE, \ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
), ),

View File

@ -159,7 +159,7 @@
#define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10 #define STM32_I2C_I2C1_IRQ_PRIORITY 10
#define STM32_I2C_I2C2_IRQ_PRIORITY 10 #define STM32_I2C_I2C2_IRQ_PRIORITY 10
#define STM32_I2C_USE_DMA TRUE #define STM32_I2C_USE_DMA FALSE
#define STM32_I2C_I2C1_DMA_PRIORITY 1 #define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1 #define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")