Hung DO 59c783df48 [Keyboard] Add support for db63 hotswap rbg (#7771 )

* correct the matrix pin for db63

* first correct layout

* adding RGB support for db63

* adding backlighting keycode

* enable back extension

* update readme for the bootloader

* correct the capslock pin

* update correct info.json and layout following suggestion

* editing contact

* Update keyboards/db/db63/README.md

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/db/db63/README.md

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

2020-01-04 17:04:49 -08:00

1.2 KiB

Raw Blame History

DB63

A 65% keyboard hotswap with RGB that runs ps2avrgb natively, with USB C, RGB underglow and backlight.

Keyboard Maintainer: QMK Community
Hardware Supported: DB63 (ATmega32A)
Keyboard layout

Make example for this keyboard (after setting up your build environment):

make db/db63:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make db/db63:default:flash

Reset Key: Hold down the key located at K00, commonly programmed as Escape while plugging in the keyboard. (All backlight LEDs will flash which indicate the board is in bootloader mode.)

Tips: Another trick to enable the board in reset mode is using BootMapper Client->Options->Set Bootloader. (This is only available for the first time, before flashing QMK Firmware.)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

1.2 KiB Raw Blame History

DB63

1.2 KiB

Raw Blame History