qmk-firmware/keyboards/ergodash/readme.md
omkbd eb9ea84927 [Keybooard] Update of Ergodash Keyboard (#5772)
* Simpler coding

use SPLIT_KEYBOARD
delete rev1 (rev2→rev1)  because rev1is not sold

* delete USE_I2C = no

* Update readme.md
2019-05-05 16:19:07 -07:00

33 lines
1.3 KiB
Markdown

# ErgoDash
![ErgoDash](https://github.com/omkbd/picture/blob/master/Ergodash.jpg)
Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)
Hardware Supported: ErgoDash PCB, Pro Micro ATmega32u4
Hardware Availability: Order your own [yourself](https://github.com/omkbd/ErgoDash)
Make example for this keyboard (after setting up your build environment):
make ergodash/rev1:default
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
Install Example: (for pro micro)
`make ergodash/rev1:default:avrdude`
Note:
"rev1" is for PCB ver 1.0,1.1,1.2
**The original Rev 1 was owned only by the designer. Therefore, Rev1 has been removed. Since the current PCB is Rev1, we changed Rev2 to Rev1 to match the firmware version.**
# Layout
![layout](https://github.com/omkbd/picture/blob/master/ergodash-layout.png)
Layout Note:
- In thumb cluster, it is not possible to use all 5 positions as small keys. (as pictured)
- The top 2 1u keys in the thumb cluster share the same connection.
- 2u key (center) position shares with the lower 1u key position
![PCB](https://github.com/omkbd/picture/blob/master/Ergodash_PCB.jpg)